HCF of three numbers

Number of Modes Calculator

Engineering Chemistry Financial Health More >>

↳

Electronics Chemical Engineering Civil Electrical More >>

⤿

Optical Fiber Design Amplifiers Analog Communications Analog Electronics More >>

⤿

Fiber Modelling Parameters Fiber Design Characteristics

✖Radius of Core is the length measured from the center of the core to the core-cladding interface.ⓘ Radius of Core [r_core]			+10% -10%
✖Numerical Aperture is a measure of the light-gathering or light-capturing ability of an optical fiber or an optical system.ⓘ Numerical Aperture [NA]			+10% -10%
✖Wavelength of Light refers to the distance between two consecutive peaks or troughs of an electromagnetic wave in the optical spectrum.ⓘ Wavelength of Light [λ]			+10% -10%

✖Number of Modes refers to the different spatial propagation paths or patterns that an optical signal can take within a multimode optical fiber.ⓘ Number of Modes [N_M]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Optical Fiber Design Formulas PDF PDF Image

Number of Modes Solution

STEP 0: Pre-Calculation Summary

Formula Used

Number of Modes = (2*pi*Radius of Core*Numerical Aperture)/Wavelength of Light
N_M = (2*pi*r_core*NA)/λ
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Number of Modes - Number of Modes refers to the different spatial propagation paths or patterns that an optical signal can take within a multimode optical fiber.
Radius of Core - (Measured in Meter) - Radius of Core is the length measured from the center of the core to the core-cladding interface.
Numerical Aperture - Numerical Aperture is a measure of the light-gathering or light-capturing ability of an optical fiber or an optical system.
Wavelength of Light - (Measured in Meter) - Wavelength of Light refers to the distance between two consecutive peaks or troughs of an electromagnetic wave in the optical spectrum.

STEP 1: Convert Input(s) to Base Unit

Radius of Core: 13 Micrometer --> 1.3E-05 Meter (Check conversion here)
Numerical Aperture: 0.4 --> No Conversion Required
Wavelength of Light: 1.55 Micrometer --> 1.55E-06 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N_M = (2*pi*r_core*NA)/λ --> (2*pi*1.3E-05*0.4)/1.55E-06

Evaluating ... ...

N_M = 21.0790732886025

STEP 3: Convert Result to Output's Unit

21.0790732886025 --> No Conversion Required

FINAL ANSWER

21.0790732886025 ≈ 21.07907 <-- Number of Modes

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Optical Fiber Design » Fiber Modelling Parameters » Number of Modes

Credits

Created by Saiju Shah

Jayawantrao Sawant College of Engineering (JSCOE), Pune

Saiju Shah has created this Calculator and 4 more calculators!

Verified by Swapneel Shah

Vidya Pratishthans College of Engineering (VPCOE), Baramati

Swapneel Shah has verified this Calculator and 5 more calculators!

< Fiber Modelling Parameters Calculators

Diameter of Fiber

LaTeX Go Diameter of Fiber = (Wavelength of Light*Number of Modes)/(pi*Numerical Aperture)

Power Loss in Fiber

LaTeX Go Power Loss Fiber = Input Power*exp(Attenuation Coefficient*Length of Fiber)

Fiber Attenuation Coefficient

LaTeX Go Attenuation Coefficient = Attenuation Loss/4.343

Number of Modes using Normalized Frequency

LaTeX Go Number of Modes = Normalized Frequency^2/2

Number of Modes Formula

LaTeX Go

Number of Modes = (2*pi*Radius of Core*Numerical Aperture)/Wavelength of Light
N_M = (2*pi*r_core*NA)/λ

What is the V number of fiber or normalized frequency of fiber?

For a single-mode fiber, it is required that the normalized frequency, satisfies the condition V < 2.4048. For a step index fiber, the mode volume of that fiber is directionally proportional to the square of the normalized frequency, that is V2.

How to Calculate Number of Modes?

Number of Modes calculator uses Number of Modes = (2*pi*Radius of Core*Numerical Aperture)/Wavelength of Light to calculate the Number of Modes, Number of Modes refers to the different spatial propagation paths or patterns that an optical signal can take within a multimode optical fiber. Multimode fibers are designed to support multiple propagation modes, which are characterized by distinct optical paths that the light can follow as it travels through the fiber. Each mode corresponds to a different pattern of light rays bouncing off the inner walls of the fiber. Number of Modes is denoted by N_M symbol.

How to calculate Number of Modes using this online calculator? To use this online calculator for Number of Modes, enter Radius of Core (r_core), Numerical Aperture (NA) & Wavelength of Light (λ) and hit the calculate button. Here is how the Number of Modes calculation can be explained with given input values -> 21.07907 = (2*pi*1.3E-05*0.4)/1.55E-06.

FAQ

What is Number of Modes?

Number of Modes refers to the different spatial propagation paths or patterns that an optical signal can take within a multimode optical fiber. Multimode fibers are designed to support multiple propagation modes, which are characterized by distinct optical paths that the light can follow as it travels through the fiber. Each mode corresponds to a different pattern of light rays bouncing off the inner walls of the fiber and is represented as N_M = (2*pi*r_core*NA)/λ or Number of Modes = (2*pi*Radius of Core*Numerical Aperture)/Wavelength of Light. Radius of Core is the length measured from the center of the core to the core-cladding interface, Numerical Aperture is a measure of the light-gathering or light-capturing ability of an optical fiber or an optical system & Wavelength of Light refers to the distance between two consecutive peaks or troughs of an electromagnetic wave in the optical spectrum.

How to calculate Number of Modes?

Number of Modes refers to the different spatial propagation paths or patterns that an optical signal can take within a multimode optical fiber. Multimode fibers are designed to support multiple propagation modes, which are characterized by distinct optical paths that the light can follow as it travels through the fiber. Each mode corresponds to a different pattern of light rays bouncing off the inner walls of the fiber is calculated using Number of Modes = (2*pi*Radius of Core*Numerical Aperture)/Wavelength of Light. To calculate Number of Modes, you need Radius of Core (r_core), Numerical Aperture (NA) & Wavelength of Light (λ). With our tool, you need to enter the respective value for Radius of Core, Numerical Aperture & Wavelength of Light and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Number of Modes?

In this formula, Number of Modes uses Radius of Core, Numerical Aperture & Wavelength of Light. We can use 1 other way(s) to calculate the same, which is/are as follows -

Number of Modes = Normalized Frequency^2/2

Home

FREE PDFs

🔍 Search