Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam Calculator

✖The Coefficient of Permeability of Soil describes how easily a liquid will move through the soil.ⓘ Coefficient of Permeability of Soil [k]			+10% -10%
✖The Number of Beds is defined as the number of beds between each of the same potential drops.ⓘ Number of Beds [B]			+10% -10%
✖The Loss of head due to sudden enlargement turbulent eddies are formed at the corner of the enlargement of the pipe section.ⓘ Loss of Head [H_L]			+10% -10%
✖Length of Dam is the measurement or extent of something from end to end.ⓘ Length of Dam [L]			+10% -10%
✖Quantity of Seepage is the movement of water in soils or the ground.ⓘ Quantity of Seepage [Q]			+10% -10%

✖Equipotential Lines is defined as the number of lines with same potential drop.ⓘ Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam [N]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Earth Dam and Gravity Dam Formulas PDF PDF Image

Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam Solution

STEP 0: Pre-Calculation Summary

Formula Used

Equipotential Lines = (Coefficient of Permeability of Soil*Number of Beds*Loss of Head*Length of Dam)/Quantity of Seepage
N = (k*B*H_L*L)/Q
This formula uses 6 Variables

Variables Used

Equipotential Lines - Equipotential Lines is defined as the number of lines with same potential drop.
Coefficient of Permeability of Soil - (Measured in Meter per Second) - The Coefficient of Permeability of Soil describes how easily a liquid will move through the soil.
Number of Beds - The Number of Beds is defined as the number of beds between each of the same potential drops.
Loss of Head - (Measured in Meter) - The Loss of head due to sudden enlargement turbulent eddies are formed at the corner of the enlargement of the pipe section.
Length of Dam - (Measured in Meter) - Length of Dam is the measurement or extent of something from end to end.
Quantity of Seepage - (Measured in Cubic Meter per Second) - Quantity of Seepage is the movement of water in soils or the ground.

STEP 1: Convert Input(s) to Base Unit

Coefficient of Permeability of Soil: 10 Centimeter per Second --> 0.1 Meter per Second (Check conversion here)
Number of Beds: 2 --> No Conversion Required
Loss of Head: 6.6 Meter --> 6.6 Meter No Conversion Required
Length of Dam: 3 Meter --> 3 Meter No Conversion Required
Quantity of Seepage: 0.95 Cubic Meter per Second --> 0.95 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N = (k*B*H_L*L)/Q --> (0.1*2*6.6*3)/0.95

Evaluating ... ...

N = 4.16842105263158

STEP 3: Convert Result to Output's Unit

4.16842105263158 --> No Conversion Required

FINAL ANSWER

4.16842105263158 ≈ 4.168421 <-- Equipotential Lines

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Dams » Earth Dam and Gravity Dam » Earth dam » Quantity of seepage » Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Quantity of seepage Calculators

Head difference between Headwater and Tail Water given Quantity of Seepage in Length of Dam

LaTeX Go Loss of Head = (Quantity of Seepage*Equipotential Lines)/(Number of Beds*Coefficient of Permeability of Soil*Length of Dam)

Length of Dam to which Flow Net applies given Quantity of Seepage in Length of Dam

LaTeX Go Length of Dam = (Quantity of Seepage*Equipotential Lines)/(Number of Beds*Loss of Head*Coefficient of Permeability of Soil)

Quantity of Seepage in Length of Dam under Consideration

LaTeX Go Quantity of Seepage = (Coefficient of Permeability of Soil*Number of Beds*Loss of Head*Length of Dam)/Equipotential Lines

Seepage Discharge in Earth Dam

LaTeX Go Seepage Discharge = Coefficient of Permeability of Soil*Hydraulic Gradient to Head Loss*Cross-Sectional Area of Base*Time Taken to Travel

Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam Formula

LaTeX Go

Equipotential Lines = (Coefficient of Permeability of Soil*Number of Beds*Loss of Head*Length of Dam)/Quantity of Seepage
N = (k*B*H_L*L)/Q

What is Darcy Law?

Darcy's law is an equation that describes the flow of a fluid through a porous medium. The law was formulated by Henry Darcy based on results of experiments .

How to Calculate Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam?

Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam calculator uses Equipotential Lines = (Coefficient of Permeability of Soil*Number of Beds*Loss of Head*Length of Dam)/Quantity of Seepage to calculate the Equipotential Lines, Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam formula refers to the number of distinct levels of potential energy decrease that occur along the length of a dam when a certain quantity of seepage is present. It represents the divisions of potential energy loss along the seepage path within the dam. Equipotential Lines is denoted by N symbol.

How to calculate Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam using this online calculator? To use this online calculator for Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam, enter Coefficient of Permeability of Soil (k), Number of Beds (B), Loss of Head (H_L), Length of Dam (L) & Quantity of Seepage (Q) and hit the calculate button. Here is how the Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam calculation can be explained with given input values -> 4.168421 = (0.1*2*6.6*3)/0.95.

FAQ

What is Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam?

Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam formula refers to the number of distinct levels of potential energy decrease that occur along the length of a dam when a certain quantity of seepage is present. It represents the divisions of potential energy loss along the seepage path within the dam and is represented as N = (k*B*H_L*L)/Q or Equipotential Lines = (Coefficient of Permeability of Soil*Number of Beds*Loss of Head*Length of Dam)/Quantity of Seepage. The Coefficient of Permeability of Soil describes how easily a liquid will move through the soil, The Number of Beds is defined as the number of beds between each of the same potential drops, The Loss of head due to sudden enlargement turbulent eddies are formed at the corner of the enlargement of the pipe section, Length of Dam is the measurement or extent of something from end to end & Quantity of Seepage is the movement of water in soils or the ground.

How to calculate Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam?

Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam formula refers to the number of distinct levels of potential energy decrease that occur along the length of a dam when a certain quantity of seepage is present. It represents the divisions of potential energy loss along the seepage path within the dam is calculated using Equipotential Lines = (Coefficient of Permeability of Soil*Number of Beds*Loss of Head*Length of Dam)/Quantity of Seepage. To calculate Number of Equipotential Drops of Net given Quantity of Seepage in Length of Dam, you need Coefficient of Permeability of Soil (k), Number of Beds (B), Loss of Head (H_L), Length of Dam (L) & Quantity of Seepage (Q). With our tool, you need to enter the respective value for Coefficient of Permeability of Soil, Number of Beds, Loss of Head, Length of Dam & Quantity of Seepage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search