Number of abrasive particles impacting per unit time Solution

STEP 0: Pre-Calculation Summary
Formula Used
Abrasive Particles Number Impacting Per Unit Time = Metal Removal Rate/(Empirical Constant*Mean Diameter of Abrasive Particles^3*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4))
N = Zw/(A0*dmean^3*V^(3/2)*(ρ/(12*hb))^(3/4))
This formula uses 7 Variables
Variables Used
Abrasive Particles Number Impacting Per Unit Time - Abrasive Particles Number Impacting Per Unit Time is defined as the average number of particles impacting work surface to cut it during Abrasive Jet Machining.
Metal Removal Rate - (Measured in Cubic Meter per Second) - Metal Removal Rate(MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as using a lathe or milling machine.
Empirical Constant - The Empirical constant is a self determined constant whose value is accessible from table of such constants. This constant is used to calculate the intrinsic carrier concentration.
Mean Diameter of Abrasive Particles - (Measured in Meter) - Mean diameter of Abrasive Particles is the mean calculated from sampling method.
Velocity - (Measured in Meter per Second) - Velocity is a vector quantity (it has both magnitude and direction) and is the rate of change of the position of an object with respect to time.
Density - (Measured in Kilogram per Cubic Meter) - The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.
Brinell Hardness - (Measured in Pascal) - Brinell Hardness uses a hard, spherical indenter which is forced into the surface of the metal to be tested.
STEP 1: Convert Input(s) to Base Unit
Metal Removal Rate: 0.16 Cubic Meter per Second --> 0.16 Cubic Meter per Second No Conversion Required
Empirical Constant: 100 --> No Conversion Required
Mean Diameter of Abrasive Particles: 4 Millimeter --> 0.004 Meter (Check conversion ​here)
Velocity: 1420686.92120444 Meter per Second --> 1420686.92120444 Meter per Second No Conversion Required
Density: 997 Kilogram per Cubic Meter --> 997 Kilogram per Cubic Meter No Conversion Required
Brinell Hardness: 200 Kilogram-Force per Square Millimeter --> 1961329999.99986 Pascal (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
N = Zw/(A0*dmean^3*V^(3/2)*(ρ/(12*hb))^(3/4)) --> 0.16/(100*0.004^3*1420686.92120444^(3/2)*(997/(12*1961329999.99986))^(3/4))
Evaluating ... ...
N = 4.99999999999999
STEP 3: Convert Result to Output's Unit
4.99999999999999 --> No Conversion Required
FINAL ANSWER
4.99999999999999 5 <-- Abrasive Particles Number Impacting Per Unit Time
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verifier Image
Verified by Nishan Poojary
Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi
Nishan Poojary has verified this Calculator and 400+ more calculators!

Abrasive Jet Machining (AJM) Calculators

Mean diameter of abrasive particles
​ LaTeX ​ Go Mean Diameter of Abrasive Particles = (Metal Removal Rate/(Empirical Constant*Abrasive Particles Number Impacting Per Unit Time*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4)))^(1/3)
Number of abrasive particles impacting per unit time
​ LaTeX ​ Go Abrasive Particles Number Impacting Per Unit Time = Metal Removal Rate/(Empirical Constant*Mean Diameter of Abrasive Particles^3*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4))
Empirical constant for AJM
​ LaTeX ​ Go Empirical Constant = Metal Removal Rate/(Abrasive Particles Number Impacting Per Unit Time*Mean Diameter of Abrasive Particles^3*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4))
Material removal rate
​ LaTeX ​ Go Metal Removal Rate = Empirical Constant*Abrasive Particles Number Impacting Per Unit Time*Mean Diameter of Abrasive Particles^3*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4)

Number of abrasive particles impacting per unit time Formula

​LaTeX ​Go
Abrasive Particles Number Impacting Per Unit Time = Metal Removal Rate/(Empirical Constant*Mean Diameter of Abrasive Particles^3*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4))
N = Zw/(A0*dmean^3*V^(3/2)*(ρ/(12*hb))^(3/4))

What is Abrasive Jet Machining ?

Abrasive Jet Machining is a process that uses a very high speed (supersonic about 2.5 Mach number) water jet mixed with abrasives to cut any type of material without, in any way, affecting the work material or the environment.
The AJM machines aim a highly focused, supersonic stream of water at the material such that it can cut composites smoothly by eroding them without generating any heat. Thus the AJM process eliminates all the thermal and mechanical distortion caused by conventional cutting methods. Also the water jet nozzle can be directed at any angle to the material thereby allowing for angled cuts. For cutting soft materials such as textiles and food stuffs, pure water without any abrasives is used.

How to Calculate Number of abrasive particles impacting per unit time?

Number of abrasive particles impacting per unit time calculator uses Abrasive Particles Number Impacting Per Unit Time = Metal Removal Rate/(Empirical Constant*Mean Diameter of Abrasive Particles^3*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4)) to calculate the Abrasive Particles Number Impacting Per Unit Time, The Number of abrasive particles impacting per unit time represents the rate at which abrasive particles come into contact with the workpiece surface during abrasive machining processes like Abrasive Jet Machining (AJM) or grinding. Abrasive Particles Number Impacting Per Unit Time is denoted by N symbol.

How to calculate Number of abrasive particles impacting per unit time using this online calculator? To use this online calculator for Number of abrasive particles impacting per unit time, enter Metal Removal Rate (Zw), Empirical Constant (A0), Mean Diameter of Abrasive Particles (dmean), Velocity (V), Density (ρ) & Brinell Hardness (hb) and hit the calculate button. Here is how the Number of abrasive particles impacting per unit time calculation can be explained with given input values -> 5 = 0.16/(100*0.004^3*1420686.92120444^(3/2)*(997/(12*1961329999.99986))^(3/4)).

FAQ

What is Number of abrasive particles impacting per unit time?
The Number of abrasive particles impacting per unit time represents the rate at which abrasive particles come into contact with the workpiece surface during abrasive machining processes like Abrasive Jet Machining (AJM) or grinding and is represented as N = Zw/(A0*dmean^3*V^(3/2)*(ρ/(12*hb))^(3/4)) or Abrasive Particles Number Impacting Per Unit Time = Metal Removal Rate/(Empirical Constant*Mean Diameter of Abrasive Particles^3*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4)). Metal Removal Rate(MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as using a lathe or milling machine, The Empirical constant is a self determined constant whose value is accessible from table of such constants. This constant is used to calculate the intrinsic carrier concentration, Mean diameter of Abrasive Particles is the mean calculated from sampling method, Velocity is a vector quantity (it has both magnitude and direction) and is the rate of change of the position of an object with respect to time, The Density of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object & Brinell Hardness uses a hard, spherical indenter which is forced into the surface of the metal to be tested.
How to calculate Number of abrasive particles impacting per unit time?
The Number of abrasive particles impacting per unit time represents the rate at which abrasive particles come into contact with the workpiece surface during abrasive machining processes like Abrasive Jet Machining (AJM) or grinding is calculated using Abrasive Particles Number Impacting Per Unit Time = Metal Removal Rate/(Empirical Constant*Mean Diameter of Abrasive Particles^3*Velocity^(3/2)*(Density/(12*Brinell Hardness))^(3/4)). To calculate Number of abrasive particles impacting per unit time, you need Metal Removal Rate (Zw), Empirical Constant (A0), Mean Diameter of Abrasive Particles (dmean), Velocity (V), Density (ρ) & Brinell Hardness (hb). With our tool, you need to enter the respective value for Metal Removal Rate, Empirical Constant, Mean Diameter of Abrasive Particles, Velocity, Density & Brinell Hardness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!