Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) Calculator

✖Force Applied at the End of the Lever is the force exerted at the end of a lever, which is a rigid bar used to multiply force.ⓘ Force Applied at the End of the Lever [P]			+10% -10%
✖Distance b/w Fulcrum and End of Lever is known as the lever arm or moment arm. It determines the lever's mechanical advantage by influencing the force required to lift or move an object.ⓘ Distance b/w Fulcrum and End of Lever [l]			+10% -10%
✖Distance b/w Fulcrum and Axis of Wheel is the length of the line segment connecting the fulcrum and the axis of rotation of a wheel.ⓘ Distance b/w Fulcrum and Axis of Wheel [x]			+10% -10%
✖Coefficient of Friction for Brake is a dimensionless scalar value that characterizes the ratio of the frictional force to the normal force between two surfaces in contact.ⓘ Coefficient of Friction for Brake [μ_brake]			+10% -10%
✖Shift in Line of Action of Tangential Force is the change in direction of the line of action of a tangential force acting on an object.ⓘ Shift in Line of Action of Tangential Force [a_shift]			+10% -10%

✖Normal Force is the force exerted by a surface against an object that is in contact with it, usually perpendicular to the surface.ⓘ Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) [Fn]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Force Formulas PDF PDF Image

Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Normal Force = (Force Applied at the End of the Lever*Distance b/w Fulcrum and End of Lever)/(Distance b/w Fulcrum and Axis of Wheel-Coefficient of Friction for Brake*Shift in Line of Action of Tangential Force)
Fn = (P*l)/(x-μ_brake*a_shift)
This formula uses 6 Variables

Variables Used

Normal Force - (Measured in Newton) - Normal Force is the force exerted by a surface against an object that is in contact with it, usually perpendicular to the surface.
Force Applied at the End of the Lever - (Measured in Newton) - Force Applied at the End of the Lever is the force exerted at the end of a lever, which is a rigid bar used to multiply force.
Distance b/w Fulcrum and End of Lever - (Measured in Meter) - Distance b/w Fulcrum and End of Lever is known as the lever arm or moment arm. It determines the lever's mechanical advantage by influencing the force required to lift or move an object.
Distance b/w Fulcrum and Axis of Wheel - (Measured in Meter) - Distance b/w Fulcrum and Axis of Wheel is the length of the line segment connecting the fulcrum and the axis of rotation of a wheel.
Coefficient of Friction for Brake - Coefficient of Friction for Brake is a dimensionless scalar value that characterizes the ratio of the frictional force to the normal force between two surfaces in contact.
Shift in Line of Action of Tangential Force - (Measured in Meter) - Shift in Line of Action of Tangential Force is the change in direction of the line of action of a tangential force acting on an object.

STEP 1: Convert Input(s) to Base Unit

Force Applied at the End of the Lever: 32 Newton --> 32 Newton No Conversion Required
Distance b/w Fulcrum and End of Lever: 1.1 Meter --> 1.1 Meter No Conversion Required
Distance b/w Fulcrum and Axis of Wheel: 2 Meter --> 2 Meter No Conversion Required
Coefficient of Friction for Brake: 0.35 --> No Conversion Required
Shift in Line of Action of Tangential Force: 3.5 Meter --> 3.5 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Fn = (P*l)/(x-μ_brake*a_shift) --> (32*1.1)/(2-0.35*3.5)

Evaluating ... ...

Fn = 45.4193548387097

STEP 3: Convert Result to Output's Unit

45.4193548387097 Newton --> No Conversion Required

FINAL ANSWER

45.4193548387097 ≈ 45.41935 Newton <-- Normal Force

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Theory of Machine » Brakes and Dynamometers » Mechanical » Force » Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise)

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Force Calculators

Force on Lever of Simple Band Brake for Anticlockwise Rotation of Drum

LaTeX Go Force Applied at the End of the Lever = (Tension in the Slack Side of Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever

Force on Lever of Simple Band Brake for Clockwise Rotation of Drum

LaTeX Go Force Applied at the End of the Lever = (Tension in Tight Side of the Band*Perpendicular Distance from Fulcrum)/Distance b/w Fulcrum and End of Lever

Maximum Braking Force Acting at Front Wheels when Brakes are Applied to Front Wheels only

LaTeX Go Braking Force = Coefficient of Friction for Brake*Normal Reaction between Ground and Front Wheel

Braking Force on Drum for Simple Band Brake

LaTeX Go Braking Force = Tension in Tight Side of the Band-Tension in the Slack Side of Band

Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) Formula

LaTeX Go

What is Fulcrum?

A fulcrum is the fixed point around which a lever rotates or pivots. It acts as the support for the lever, allowing force applied at one point to lift or move an object at another point. The position of the fulcrum affects the leverage and efficiency of the movement.

How to Calculate Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise)?

Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) calculator uses Normal Force = (Force Applied at the End of the Lever*Distance b/w Fulcrum and End of Lever)/(Distance b/w Fulcrum and Axis of Wheel-Coefficient of Friction for Brake*Shift in Line of Action of Tangential Force) to calculate the Normal Force, Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) formula is defined as the force exerted by the shoe brake on the rotating wheel when the line of action of the tangential force passes above the fulcrum in a clockwise direction, which is essential in determining the braking efficiency and stability of the system. Normal Force is denoted by Fn symbol.

How to calculate Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) using this online calculator? To use this online calculator for Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise), enter Force Applied at the End of the Lever (P), Distance b/w Fulcrum and End of Lever (l), Distance b/w Fulcrum and Axis of Wheel (x), Coefficient of Friction for Brake (μ_brake) & Shift in Line of Action of Tangential Force (a_shift) and hit the calculate button. Here is how the Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) calculation can be explained with given input values -> 45.41935 = (32*1.1)/(2-0.35*3.5).

FAQ

What is Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise)?

Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) formula is defined as the force exerted by the shoe brake on the rotating wheel when the line of action of the tangential force passes above the fulcrum in a clockwise direction, which is essential in determining the braking efficiency and stability of the system and is represented as Fn = (P*l)/(x-μ_brake*a_shift) or Normal Force = (Force Applied at the End of the Lever*Distance b/w Fulcrum and End of Lever)/(Distance b/w Fulcrum and Axis of Wheel-Coefficient of Friction for Brake*Shift in Line of Action of Tangential Force). Force Applied at the End of the Lever is the force exerted at the end of a lever, which is a rigid bar used to multiply force, Distance b/w Fulcrum and End of Lever is known as the lever arm or moment arm. It determines the lever's mechanical advantage by influencing the force required to lift or move an object, Distance b/w Fulcrum and Axis of Wheel is the length of the line segment connecting the fulcrum and the axis of rotation of a wheel, Coefficient of Friction for Brake is a dimensionless scalar value that characterizes the ratio of the frictional force to the normal force between two surfaces in contact & Shift in Line of Action of Tangential Force is the change in direction of the line of action of a tangential force acting on an object.

How to calculate Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise)?

Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise) formula is defined as the force exerted by the shoe brake on the rotating wheel when the line of action of the tangential force passes above the fulcrum in a clockwise direction, which is essential in determining the braking efficiency and stability of the system is calculated using Normal Force = (Force Applied at the End of the Lever*Distance b/w Fulcrum and End of Lever)/(Distance b/w Fulcrum and Axis of Wheel-Coefficient of Friction for Brake*Shift in Line of Action of Tangential Force). To calculate Normal Force for Shoe Brake if Line of Action of Tangential Force Passes above Fulcrum (Clockwise), you need Force Applied at the End of the Lever (P), Distance b/w Fulcrum and End of Lever (l), Distance b/w Fulcrum and Axis of Wheel (x), Coefficient of Friction for Brake (μ_brake) & Shift in Line of Action of Tangential Force (a_shift). With our tool, you need to enter the respective value for Force Applied at the End of the Lever, Distance b/w Fulcrum and End of Lever, Distance b/w Fulcrum and Axis of Wheel, Coefficient of Friction for Brake & Shift in Line of Action of Tangential Force and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Normal Force?

In this formula, Normal Force uses Force Applied at the End of the Lever, Distance b/w Fulcrum and End of Lever, Distance b/w Fulcrum and Axis of Wheel, Coefficient of Friction for Brake & Shift in Line of Action of Tangential Force. We can use 3 other way(s) to calculate the same, which is/are as follows -

Normal Force = (Force Applied at the End of the Lever*Distance b/w Fulcrum and End of Lever)/(Distance b/w Fulcrum and Axis of Wheel-Coefficient of Friction for Brake*Shift in Line of Action of Tangential Force)
Normal Force = (Force Applied at the End of the Lever*Distance b/w Fulcrum and End of Lever)/(Distance b/w Fulcrum and Axis of Wheel+Coefficient of Friction for Brake*Shift in Line of Action of Tangential Force)
Normal Force = (Force Applied at the End of the Lever*Distance b/w Fulcrum and End of Lever)/(Distance b/w Fulcrum and Axis of Wheel+Coefficient of Friction for Brake*Shift in Line of Action of Tangential Force)

Home

FREE PDFs

🔍 Search