Nominal Tensile Stress in Rectangular Plate with Transverse Hole Calculator

✖The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.ⓘ Load on Flat Plate [P]			+10% -10%
✖The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.ⓘ Width of Plate [w]			+10% -10%
✖The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.ⓘ Diameter of Transverse Hole in Plate [d_h]			+10% -10%
✖The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.ⓘ Thickness of Plate [t]			+10% -10%

✖The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.ⓘ Nominal Tensile Stress in Rectangular Plate with Transverse Hole [σ_o]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Stress Concentration Factors in Design Formulas PDF PDF Image

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Solution

STEP 0: Pre-Calculation Summary

Formula Used

Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)
σ_o = P/((w-d_h)*t)
This formula uses 5 Variables

Variables Used

Nominal Stress - (Measured in Pascal) - The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.
Load on Flat Plate - (Measured in Newton) - The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.
Width of Plate - (Measured in Meter) - The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.
Diameter of Transverse Hole in Plate - (Measured in Meter) - The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.
Thickness of Plate - (Measured in Meter) - The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.

STEP 1: Convert Input(s) to Base Unit

Load on Flat Plate: 8750 Newton --> 8750 Newton No Conversion Required
Width of Plate: 70 Millimeter --> 0.07 Meter (Check conversion here)
Diameter of Transverse Hole in Plate: 35.01 Millimeter --> 0.03501 Meter (Check conversion here)
Thickness of Plate: 10 Millimeter --> 0.01 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_o = P/((w-d_h)*t) --> 8750/((0.07-0.03501)*0.01)

Evaluating ... ...

σ_o = 25007144.8985424

STEP 3: Convert Result to Output's Unit

25007144.8985424 Pascal -->25.0071448985424 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

25.0071448985424 ≈ 25.00714 Newton per Square Millimeter <-- Nominal Stress

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design against Fluctuating Load » Stress Concentration Factors in Design » Rectangular Plate against Fluctuating Loads » Nominal Tensile Stress in Rectangular Plate with Transverse Hole

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Rectangular Plate against Fluctuating Loads Calculators

Nominal Tensile Stress in Rectangular Plate with Transverse Hole

LaTeX Go Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)

Width of Rectangular Plate with Transverse Hole given Nominal Stress

LaTeX Go Width of Plate = Load on Flat Plate/(Thickness of Plate*Nominal Stress)+Diameter of Transverse Hole in Plate

Load on Rectangular Plate with Transverse Hole given Nominal Stress

LaTeX Go Load on Flat Plate = Nominal Stress*(Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate

Highest Value of Actual Stress near Discontinuity

LaTeX Go Highest Value of Actual Stress near Discontinuity = Fatigue Stress Concentration Factor*Nominal Stress

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Formula

LaTeX Go

Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate)
σ_o = P/((w-d_h)*t)

What is stress concentration?

Stress concentration is defined as the localization of high stresses due to the irregularities present in the component and abrupt changes in the cross-section. In order to consider the effect of stress concentration and find out localized stresses, a factor called the stress concentration factor is used.

How to Calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

Nominal Tensile Stress in Rectangular Plate with Transverse Hole calculator uses Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate) to calculate the Nominal Stress, The Nominal Tensile Stress in Rectangular plate with Transverse hole is the tensile stress obtained by elementary equations for a minimum cross-section of a rectangular plate with a transverse hole. Nominal Stress is denoted by σ_o symbol.

How to calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole using this online calculator? To use this online calculator for Nominal Tensile Stress in Rectangular Plate with Transverse Hole, enter Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Thickness of Plate (t) and hit the calculate button. Here is how the Nominal Tensile Stress in Rectangular Plate with Transverse Hole calculation can be explained with given input values -> 2.5E-5 = 8750/((0.07-0.03501)*0.01).

FAQ

What is Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

The Nominal Tensile Stress in Rectangular plate with Transverse hole is the tensile stress obtained by elementary equations for a minimum cross-section of a rectangular plate with a transverse hole and is represented as σ_o = P/((w-d_h)*t) or Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate). The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions, The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications, The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity & The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.

How to calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

The Nominal Tensile Stress in Rectangular plate with Transverse hole is the tensile stress obtained by elementary equations for a minimum cross-section of a rectangular plate with a transverse hole is calculated using Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate). To calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole, you need Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Thickness of Plate (t). With our tool, you need to enter the respective value for Load on Flat Plate, Width of Plate, Diameter of Transverse Hole in Plate & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search