Nominal Tensile Stress in Flat Plate with Shoulder Fillet Calculator

✖Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate.ⓘ Load on Flat Plate [P]			+10% -10%
✖Smaller Width of Plate is the smaller width of a plate which has two different widths or cross-sections or side to side distance.ⓘ Smaller Width of Plate [d_o]			+10% -10%
✖Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.ⓘ Thickness of Plate [t]			+10% -10%

✖Nominal Stress is the value of the stress at the minimum cross-section.ⓘ Nominal Tensile Stress in Flat Plate with Shoulder Fillet [σ_o]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Nominal Tensile Stress in Flat Plate with Shoulder Fillet Solution

STEP 0: Pre-Calculation Summary

Formula Used

Nominal Stress = Load on Flat Plate/(Smaller Width of Plate*Thickness of Plate)
σ_o = P/(d_o*t)
This formula uses 4 Variables

Variables Used

Nominal Stress - (Measured in Pascal) - Nominal Stress is the value of the stress at the minimum cross-section.
Load on Flat Plate - (Measured in Newton) - Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate.
Smaller Width of Plate - (Measured in Meter) - Smaller Width of Plate is the smaller width of a plate which has two different widths or cross-sections or side to side distance.
Thickness of Plate - (Measured in Meter) - Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.

STEP 1: Convert Input(s) to Base Unit

Load on Flat Plate: 8750 Newton --> 8750 Newton No Conversion Required
Smaller Width of Plate: 35 Millimeter --> 0.035 Meter (Check conversion here)
Thickness of Plate: 10 Millimeter --> 0.01 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_o = P/(d_o*t) --> 8750/(0.035*0.01)

Evaluating ... ...

σ_o = 25000000

STEP 3: Convert Result to Output's Unit

25000000 Pascal -->25 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

25 Newton per Square Millimeter <-- Nominal Stress

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design against Fluctuating Load » Stress Concentration Factors in Design » Flat Plate against Fluctuating Loads » Nominal Tensile Stress in Flat Plate with Shoulder Fillet

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< Flat Plate against Fluctuating Loads Calculators

Nominal Tensile Stress in Flat Plate with Shoulder Fillet

LaTeX Go Nominal Stress = Load on Flat Plate/(Smaller Width of Plate*Thickness of Plate)

Theoretical Stress Concentration Factor

LaTeX Go Theoretical Stress Concentration Factor = Highest Value of Actual Stress near Discontinuity/Nominal Stress

Theoretical Stress Concentration Factor for Elliptical Crack

LaTeX Go Theoretical Stress Concentration Factor = 1+Major Axis of Elliptical Crack/Minor Axis of Elliptical Crack

Mean Stress for Fluctuating Load

LaTeX Go Mean Stress for Fluctuating Load = (Maximum Stress at Crack Tip+Minimum Stress at Crack Tip)/2

Nominal Tensile Stress in Flat Plate with Shoulder Fillet Formula

LaTeX Go

Nominal Stress = Load on Flat Plate/(Smaller Width of Plate*Thickness of Plate)
σ_o = P/(d_o*t)

What could be the factors for Variation in Properties of Materials?

In the design of machine components, it is assumed that the material is homogeneous throughout the component. In practice, there is variation in material properties from one end to another due to the following factors:
(a) Internal cracks and flaws like blowholes.
(b) Cavities in welds.
(c) Air holes in steel components.
(d) Nonmetallic or foreign inclusions.

How to Calculate Nominal Tensile Stress in Flat Plate with Shoulder Fillet?

Nominal Tensile Stress in Flat Plate with Shoulder Fillet calculator uses Nominal Stress = Load on Flat Plate/(Smaller Width of Plate*Thickness of Plate) to calculate the Nominal Stress, The Nominal Tensile Stress in Flat plate with Shoulder fillet is the tensile stress obtained by elementary equations for a minimum cross-section of a flat plate with a shoulder fillet. Nominal Stress is denoted by σ_o symbol.

How to calculate Nominal Tensile Stress in Flat Plate with Shoulder Fillet using this online calculator? To use this online calculator for Nominal Tensile Stress in Flat Plate with Shoulder Fillet, enter Load on Flat Plate (P), Smaller Width of Plate (d_o) & Thickness of Plate (t) and hit the calculate button. Here is how the Nominal Tensile Stress in Flat Plate with Shoulder Fillet calculation can be explained with given input values -> 2.5E-5 = 8750/(0.035*0.01).

FAQ

What is Nominal Tensile Stress in Flat Plate with Shoulder Fillet?

The Nominal Tensile Stress in Flat plate with Shoulder fillet is the tensile stress obtained by elementary equations for a minimum cross-section of a flat plate with a shoulder fillet and is represented as σ_o = P/(d_o*t) or Nominal Stress = Load on Flat Plate/(Smaller Width of Plate*Thickness of Plate). Load on Flat Plate is defined as the force exerted on the surface or body of a flat plate, Smaller Width of Plate is the smaller width of a plate which has two different widths or cross-sections or side to side distance & Thickness of Plate is the thickness or the minimum dimension of the plate or a metal sheet under consideration.

How to calculate Nominal Tensile Stress in Flat Plate with Shoulder Fillet?

The Nominal Tensile Stress in Flat plate with Shoulder fillet is the tensile stress obtained by elementary equations for a minimum cross-section of a flat plate with a shoulder fillet is calculated using Nominal Stress = Load on Flat Plate/(Smaller Width of Plate*Thickness of Plate). To calculate Nominal Tensile Stress in Flat Plate with Shoulder Fillet, you need Load on Flat Plate (P), Smaller Width of Plate (d_o) & Thickness of Plate (t). With our tool, you need to enter the respective value for Load on Flat Plate, Smaller Width of Plate & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search