Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut Calculator

✖Axial load on screw is the instantaneous load applied to the screw along its axis.ⓘ Axial load on screw [W_a]			+10% -10%
✖Transverse shear stress in nut is the resistance force developed per unit cross-sectional area by the nut to avoid transverse deformation.ⓘ Transverse shear stress in nut [t_n]			+10% -10%
✖Thread Thickness is defined as the thickness of a single thread.ⓘ Thread Thickness [t]			+10% -10%
✖A number of Engaged Threads of a screw/bolt are the count of threads of the screw/bolt that are currently in engagement with the nut.ⓘ Number of Engaged Threads [z]			+10% -10%

✖Nominal diameter of screw is defined as the diameter of the cylinder touching the external threads of the screw.ⓘ Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut [d]

⎘ Copy

👎

Formula

Reset

👍

Download Power Screws Formulas PDF PDF Image

Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut Solution

STEP 0: Pre-Calculation Summary

Formula Used

Nominal diameter of screw = Axial load on screw/(pi*Transverse shear stress in nut*Thread Thickness*Number of Engaged Threads)
d = W_a/(pi*t_n*t*z)
This formula uses 1 Constants, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Nominal diameter of screw - (Measured in Meter) - Nominal diameter of screw is defined as the diameter of the cylinder touching the external threads of the screw.
Axial load on screw - (Measured in Newton) - Axial load on screw is the instantaneous load applied to the screw along its axis.
Transverse shear stress in nut - (Measured in Pascal) - Transverse shear stress in nut is the resistance force developed per unit cross-sectional area by the nut to avoid transverse deformation.
Thread Thickness - (Measured in Meter) - Thread Thickness is defined as the thickness of a single thread.
Number of Engaged Threads - A number of Engaged Threads of a screw/bolt are the count of threads of the screw/bolt that are currently in engagement with the nut.

STEP 1: Convert Input(s) to Base Unit

Axial load on screw: 131000 Newton --> 131000 Newton No Conversion Required
Transverse shear stress in nut: 23.3 Newton per Square Millimeter --> 23300000 Pascal (Check conversion here)
Thread Thickness: 4 Millimeter --> 0.004 Meter (Check conversion here)
Number of Engaged Threads: 9 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d = W_a/(pi*t_n*t*z) --> 131000/(pi*23300000*0.004*9)

Evaluating ... ...

d = 0.0497122020625615

STEP 3: Convert Result to Output's Unit

0.0497122020625615 Meter -->49.7122020625615 Millimeter (Check conversion here)

FINAL ANSWER

49.7122020625615 ≈ 49.7122 Millimeter <-- Nominal diameter of screw

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Power Screws » Design of Screw and Nut » Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Design of Screw and Nut Calculators

Mean Diameter of Power Screw

Go Mean Diameter of Power Screw = Nominal diameter of screw-0.5*Pitch of power screw thread

Nominal Diameter of Power Screw

Go Nominal diameter of screw = Core diameter of screw+Pitch of power screw thread

Core Diameter of Power Screw

Go Core diameter of screw = Nominal diameter of screw-Pitch of power screw thread

Pitch of Power Screw

Go Pitch of power screw thread = Nominal diameter of screw-Core diameter of screw

Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut Formula

Nominal diameter of screw = Axial load on screw/(pi*Transverse shear stress in nut*Thread Thickness*Number of Engaged Threads)
d = W_a/(pi*t_n*t*z)

Transverse Shear Stress in Nut

In an engaged pair of Screw and Nut, under the action of the load W, the thread of the Nut experience Shear Stress due to bending and tend to shear off at the nominal diameter. This Shear Stress due to bending is referred to as Transverse Shear Stress.

How to Calculate Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut?

Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut calculator uses Nominal diameter of screw = Axial load on screw/(pi*Transverse shear stress in nut*Thread Thickness*Number of Engaged Threads) to calculate the Nominal diameter of screw, The Nominal Diameter of Screw given Transverse Shear Stress at root of Nut, is the Maximum Diameter of the Screw, engaged with a certain Nut that generates the given Transverse Shear Stress in the Nut. Nominal diameter of screw is denoted by d symbol.

How to calculate Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut using this online calculator? To use this online calculator for Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut, enter Axial load on screw (W_a), Transverse shear stress in nut (t_n), Thread Thickness (t) & Number of Engaged Threads (z) and hit the calculate button. Here is how the Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut calculation can be explained with given input values -> 49712.2 = 131000/(pi*23300000*0.004*9).

FAQ

What is Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut?

The Nominal Diameter of Screw given Transverse Shear Stress at root of Nut, is the Maximum Diameter of the Screw, engaged with a certain Nut that generates the given Transverse Shear Stress in the Nut and is represented as d = W_a/(pi*t_n*t*z) or Nominal diameter of screw = Axial load on screw/(pi*Transverse shear stress in nut*Thread Thickness*Number of Engaged Threads). Axial load on screw is the instantaneous load applied to the screw along its axis, Transverse shear stress in nut is the resistance force developed per unit cross-sectional area by the nut to avoid transverse deformation, Thread Thickness is defined as the thickness of a single thread & A number of Engaged Threads of a screw/bolt are the count of threads of the screw/bolt that are currently in engagement with the nut.

How to calculate Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut?

The Nominal Diameter of Screw given Transverse Shear Stress at root of Nut, is the Maximum Diameter of the Screw, engaged with a certain Nut that generates the given Transverse Shear Stress in the Nut is calculated using Nominal diameter of screw = Axial load on screw/(pi*Transverse shear stress in nut*Thread Thickness*Number of Engaged Threads). To calculate Nominal Diameter of Screw given Transverse Shear Stress at Root of Nut, you need Axial load on screw (W_a), Transverse shear stress in nut (t_n), Thread Thickness (t) & Number of Engaged Threads (z). With our tool, you need to enter the respective value for Axial load on screw, Transverse shear stress in nut, Thread Thickness & Number of Engaged Threads and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Nominal diameter of screw?

In this formula, Nominal diameter of screw uses Axial load on screw, Transverse shear stress in nut, Thread Thickness & Number of Engaged Threads. We can use 3 other way(s) to calculate the same, which is/are as follows -

Nominal diameter of screw = Core diameter of screw+Pitch of power screw thread
Nominal diameter of screw = Mean Diameter of Power Screw+(0.5*Pitch of power screw thread)
Nominal diameter of screw = sqrt((4*Axial load on screw/(Unit bearing pressure for nut*pi*Number of Engaged Threads))+(Core diameter of screw)^2)

Home

FREE PDFs

🔍 Search