New Total Depth of Reservoir Calculator

✖Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).ⓘ Difference in the Elevation (FRL and Original bed) [H]			+10% -10%
✖Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.ⓘ Height above Bed [h_o]			+10% -10%

✖New Total Depth of Reservoir is the depth where water is collected and kept in quantity for use.ⓘ New Total Depth of Reservoir [D]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Prediction of Sediment Distribution Formulas PDF PDF Image

New Total Depth of Reservoir Solution

STEP 0: Pre-Calculation Summary

Formula Used

New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed
D = H-h_o
This formula uses 3 Variables

Variables Used

New Total Depth of Reservoir - (Measured in Meter) - New Total Depth of Reservoir is the depth where water is collected and kept in quantity for use.
Difference in the Elevation (FRL and Original bed) - (Measured in Meter) - Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).
Height above Bed - (Measured in Meter) - Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.

STEP 1: Convert Input(s) to Base Unit

Difference in the Elevation (FRL and Original bed): 11 Meter --> 11 Meter No Conversion Required
Height above Bed: 2 Meter --> 2 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D = H-h_o --> 11-2

Evaluating ... ...

D = 9

STEP 3: Convert Result to Output's Unit

9 Meter --> No Conversion Required

FINAL ANSWER

9 Meter <-- New Total Depth of Reservoir

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Erosion and Reservoir Sedimentation » Prediction of Sediment Distribution » Empirical Area Reduction Method » New Total Depth of Reservoir

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Empirical Area Reduction Method Calculators

Relative Area for Different Type Classification of Reservoir

LaTeX Go Dimensionless Relative Area = Coefficient c*(Relative Depth^Coefficient m1)*(1-Relative Depth)^Coefficient n1

New Total Depth of Reservoir

LaTeX Go New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed

Difference in Elevations of Full Reservoir Level and Original Bed of Reservoir

LaTeX Go Difference in the Elevation (FRL and Original bed) = Height above Bed/Relative Depth

Relative Depth at New Zero Elevation

LaTeX Go Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed)

New Total Depth of Reservoir Formula

LaTeX Go

New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed
D = H-h_o

What is a Reservoir?

A Reservoir is an artificial lake where water is stored. Most reservoirs are formed by constructing dams across rivers. A reservoir can also be formed from a natural lake whose outlet has been dammed to control the water level. The dam controls the amount of water that flows out of the reservoir.

How to Calculate New Total Depth of Reservoir?

New Total Depth of Reservoir calculator uses New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed to calculate the New Total Depth of Reservoir, The New Total Depth of Reservoir formula is defined as the depth of the reservoir under study after the formation of new datum, courtesy of sediment fills in the reservoir. New Total Depth of Reservoir is denoted by D symbol.

How to calculate New Total Depth of Reservoir using this online calculator? To use this online calculator for New Total Depth of Reservoir, enter Difference in the Elevation (FRL and Original bed) (H) & Height above Bed (h_o) and hit the calculate button. Here is how the New Total Depth of Reservoir calculation can be explained with given input values -> 9 = 11-2.

FAQ

What is New Total Depth of Reservoir?

The New Total Depth of Reservoir formula is defined as the depth of the reservoir under study after the formation of new datum, courtesy of sediment fills in the reservoir and is represented as D = H-h_o or New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed. Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL) & Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.

How to calculate New Total Depth of Reservoir?

The New Total Depth of Reservoir formula is defined as the depth of the reservoir under study after the formation of new datum, courtesy of sediment fills in the reservoir is calculated using New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed. To calculate New Total Depth of Reservoir, you need Difference in the Elevation (FRL and Original bed) (H) & Height above Bed (h_o). With our tool, you need to enter the respective value for Difference in the Elevation (FRL and Original bed) & Height above Bed and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search