New Pressure after Shock Formation for Compression Wave Calculator

✖Density ahead of shock is the density of the fluid in the upstream direction of shock.ⓘ Density Ahead of Shock [ρ₁]			+10% -10%
✖The Specific heat ratio of a gas is the ratio of the specific heat of the gas at a constant pressure to its specific heat at a constant volume.ⓘ Specific Heat Ratio [γ]			+10% -10%
✖Normal velocity is the velocity normal to the shock formation.ⓘ Normal velocity [Vn]			+10% -10%
✖Old speed of sound is the speed of sound before the shock.ⓘ Old Speed of Sound [c_old]			+10% -10%
✖Time in seconds is what a clock reads, it is a scalar quantity.ⓘ Time in Seconds [t_sec]			+10% -10%

✖Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.ⓘ New Pressure after Shock Formation for Compression Wave [P]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Hypersonic Inviscid Flow Formula PDF PDF Image

New Pressure after Shock Formation for Compression Wave Solution

STEP 0: Pre-Calculation Summary

Formula Used

Pressure = Density Ahead of Shock*(1+((Specific Heat Ratio-1)/2)*(Normal velocity/Old Speed of Sound))^(2*Specific Heat Ratio/(Specific Heat Ratio-Time in Seconds))
P = ρ₁*(1+((γ-1)/2)*(Vn/c_old))^(2*γ/(γ-t_sec))
This formula uses 6 Variables

Variables Used

Pressure - (Measured in Pascal) - Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.
Density Ahead of Shock - (Measured in Kilogram per Cubic Meter) - Density ahead of shock is the density of the fluid in the upstream direction of shock.
Specific Heat Ratio - The Specific heat ratio of a gas is the ratio of the specific heat of the gas at a constant pressure to its specific heat at a constant volume.
Normal velocity - (Measured in Meter per Second) - Normal velocity is the velocity normal to the shock formation.
Old Speed of Sound - (Measured in Meter per Second) - Old speed of sound is the speed of sound before the shock.
Time in Seconds - (Measured in Second) - Time in seconds is what a clock reads, it is a scalar quantity.

STEP 1: Convert Input(s) to Base Unit

Density Ahead of Shock: 1.4 Kilogram per Cubic Meter --> 1.4 Kilogram per Cubic Meter No Conversion Required
Specific Heat Ratio: 1.6 --> No Conversion Required
Normal velocity: 1000 Meter per Second --> 1000 Meter per Second No Conversion Required
Old Speed of Sound: 342 Meter per Second --> 342 Meter per Second No Conversion Required
Time in Seconds: 38 Second --> 38 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P = ρ₁*(1+((γ-1)/2)*(Vn/c_old))^(2*γ/(γ-t_sec)) --> 1.4*(1+((1.6-1)/2)*(1000/342))^(2*1.6/(1.6-38))

Evaluating ... ...

P = 1.32459556094178

STEP 3: Convert Result to Output's Unit

1.32459556094178 Pascal --> No Conversion Required

FINAL ANSWER

1.32459556094178 ≈ 1.324596 Pascal <-- Pressure

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Hypersonic Flow » Hypersonic Inviscid Flow » Compression Waves » New Pressure after Shock Formation for Compression Wave

Credits

Created by Sanjay Krishna

Amrita School of Engineering (ASE), Vallikavu

Sanjay Krishna has created this Calculator and 300+ more calculators!

Verified by Sai Venkata Phanindra Chary Arendra

Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering and Technology (VNRVJIET), Hyderabad

Sai Venkata Phanindra Chary Arendra has verified this Calculator and 300+ more calculators!

< Compression Waves Calculators

Density before Shock Formation for Compression Wave

LaTeX Go Density Behind Shock = Stagnation pressure ahead of shock/(1+((Specific Heat Ratio-1)/2)*(Normal velocity/Old Speed of Sound))^(2*Specific Heat Ratio/(Specific Heat Ratio-Time in Seconds))

New Pressure after Shock Formation for Compression Wave

LaTeX Go Pressure = Density Ahead of Shock*(1+((Specific Heat Ratio-1)/2)*(Normal velocity/Old Speed of Sound))^(2*Specific Heat Ratio/(Specific Heat Ratio-Time in Seconds))

Temperature Ratio for Unsteady Compression Waves

LaTeX Go Temperature Ratio = (1+((Specific Heat Ratio-1)/2)*(Induced Mass Motion/Speed of Sound))^2

New Pressure after Shock Formation for Compression Wave Formula

LaTeX Go

What is specific heat ratio?

In thermal physics and thermodynamics, the heat capacity ratio, also known as the adiabatic index, the ratio of specific heats, or Laplace's coefficient, is the ratio of the heat capacity at constant pressure (CP) to heat capacity at constant volume (CV).

How to Calculate New Pressure after Shock Formation for Compression Wave?

New Pressure after Shock Formation for Compression Wave calculator uses Pressure = Density Ahead of Shock*(1+((Specific Heat Ratio-1)/2)*(Normal velocity/Old Speed of Sound))^(2*Specific Heat Ratio/(Specific Heat Ratio-Time in Seconds)) to calculate the Pressure, New Pressure after Shock Formation for Compression Wave formula is defined as a measure of the resulting pressure after a shock wave forms in a compressible flow, typically occurring in high-speed flight or explosions, where the pressure increase is dependent on the properties of the fluid and the shock wave. Pressure is denoted by P symbol.

How to calculate New Pressure after Shock Formation for Compression Wave using this online calculator? To use this online calculator for New Pressure after Shock Formation for Compression Wave, enter Density Ahead of Shock (ρ₁), Specific Heat Ratio (γ), Normal velocity (Vn), Old Speed of Sound (c_old) & Time in Seconds (t_sec) and hit the calculate button. Here is how the New Pressure after Shock Formation for Compression Wave calculation can be explained with given input values -> 1.324596 = 1.4*(1+((1.6-1)/2)*(1000/342))^(2*1.6/(1.6-38)).

FAQ

What is New Pressure after Shock Formation for Compression Wave?

New Pressure after Shock Formation for Compression Wave formula is defined as a measure of the resulting pressure after a shock wave forms in a compressible flow, typically occurring in high-speed flight or explosions, where the pressure increase is dependent on the properties of the fluid and the shock wave and is represented as P = ρ₁*(1+((γ-1)/2)*(Vn/c_old))^(2*γ/(γ-t_sec)) or Pressure = Density Ahead of Shock*(1+((Specific Heat Ratio-1)/2)*(Normal velocity/Old Speed of Sound))^(2*Specific Heat Ratio/(Specific Heat Ratio-Time in Seconds)). Density ahead of shock is the density of the fluid in the upstream direction of shock, The Specific heat ratio of a gas is the ratio of the specific heat of the gas at a constant pressure to its specific heat at a constant volume, Normal velocity is the velocity normal to the shock formation, Old speed of sound is the speed of sound before the shock & Time in seconds is what a clock reads, it is a scalar quantity.

How to calculate New Pressure after Shock Formation for Compression Wave?

New Pressure after Shock Formation for Compression Wave formula is defined as a measure of the resulting pressure after a shock wave forms in a compressible flow, typically occurring in high-speed flight or explosions, where the pressure increase is dependent on the properties of the fluid and the shock wave is calculated using Pressure = Density Ahead of Shock*(1+((Specific Heat Ratio-1)/2)*(Normal velocity/Old Speed of Sound))^(2*Specific Heat Ratio/(Specific Heat Ratio-Time in Seconds)). To calculate New Pressure after Shock Formation for Compression Wave, you need Density Ahead of Shock (ρ₁), Specific Heat Ratio (γ), Normal velocity (Vn), Old Speed of Sound (c_old) & Time in Seconds (t_sec). With our tool, you need to enter the respective value for Density Ahead of Shock, Specific Heat Ratio, Normal velocity, Old Speed of Sound & Time in Seconds and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search