Net Waste Activated Sludge Calculator

✖Observed Cell Yield refers to the observed mg of cells produced per mg organic matter removed.ⓘ Observed Cell Yield [Y_obs]			+10% -10%
✖Average Daily Influent Flow Rate is the total discharge that comes in the reactor.ⓘ Average Daily Influent Flow Rate [Q_a]			+10% -10%
✖Influent Substrate Concentration refers to the concentration of organic matter or nutrients in the raw wastewater entering a treatment plant.ⓘ Influent Substrate Concentration [S_o]			+10% -10%
✖Effluent Substrate Concentration refers to the concentration of organic matter or nutrients present in the treated wastewater (effluent) that is discharged from a wastewater treatment plant.ⓘ Effluent Substrate Concentration [S]			+10% -10%

✖Net Waste Activated Sludge is the amount of waste product that can be treated using the activated sludge process.ⓘ Net Waste Activated Sludge [P_x]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of a Complete Mix Activated Sludge Reactor Formula PDF PDF Image

Net Waste Activated Sludge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Net Waste Activated Sludge = Observed Cell Yield*Average Daily Influent Flow Rate*(Influent Substrate Concentration-Effluent Substrate Concentration)*8.34
P_x = Y_obs*Q_a*(S_o-S)*8.34
This formula uses 5 Variables

Variables Used

Net Waste Activated Sludge - (Measured in Kilogram per Second) - Net Waste Activated Sludge is the amount of waste product that can be treated using the activated sludge process.
Observed Cell Yield - Observed Cell Yield refers to the observed mg of cells produced per mg organic matter removed.
Average Daily Influent Flow Rate - (Measured in Cubic Meter per Second) - Average Daily Influent Flow Rate is the total discharge that comes in the reactor.
Influent Substrate Concentration - (Measured in Kilogram per Cubic Meter) - Influent Substrate Concentration refers to the concentration of organic matter or nutrients in the raw wastewater entering a treatment plant.
Effluent Substrate Concentration - (Measured in Kilogram per Cubic Meter) - Effluent Substrate Concentration refers to the concentration of organic matter or nutrients present in the treated wastewater (effluent) that is discharged from a wastewater treatment plant.

STEP 1: Convert Input(s) to Base Unit

Observed Cell Yield: 0.8 --> No Conversion Required
Average Daily Influent Flow Rate: 1.2 Cubic Meter per Day --> 1.38888888888889E-05 Cubic Meter per Second (Check conversion here)
Influent Substrate Concentration: 25 Milligram per Liter --> 0.025 Kilogram per Cubic Meter (Check conversion here)
Effluent Substrate Concentration: 15 Milligram per Liter --> 0.015 Kilogram per Cubic Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_x = Y_obs*Q_a*(S_o-S)*8.34 --> 0.8*1.38888888888889E-05*(0.025-0.015)*8.34

Evaluating ... ...

P_x = 9.26666666666668E-07

STEP 3: Convert Result to Output's Unit

9.26666666666668E-07 Kilogram per Second -->80064.0000000001 Milligram per Day (Check conversion here)

FINAL ANSWER

80064.0000000001 ≈ 80064 Milligram per Day <-- Net Waste Activated Sludge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of a Complete Mix Activated Sludge Reactor » Net Waste Activated Sludge » Net Waste Activated Sludge

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Net Waste Activated Sludge Calculators

Net Waste Activated Sludge given Theoretical Oxygen Requirement

LaTeX Go Net Waste Activated Sludge = ((Average Daily Influent Flow Rate*8.34*(Influent Substrate Concentration-Effluent Substrate Concentration))/(BOD Conversion Factor*1.42))-(Theoretical Oxygen Requirement/1.42)

Net Waste Activated Sludge

LaTeX Go Net Waste Activated Sludge = Observed Cell Yield*Average Daily Influent Flow Rate*(Influent Substrate Concentration-Effluent Substrate Concentration)*8.34

Net Waste Activated Sludge Formula

LaTeX Go

Net Waste Activated Sludge = Observed Cell Yield*Average Daily Influent Flow Rate*(Influent Substrate Concentration-Effluent Substrate Concentration)*8.34
P_x = Y_obs*Q_a*(S_o-S)*8.34

What is activated sludge?

Activated sludge is a mass of aerated precipitated sewage added to untreated sewage to bring about purification by hastening decomposition by microorganisms

How to Calculate Net Waste Activated Sludge?

Net Waste Activated Sludge calculator uses Net Waste Activated Sludge = Observed Cell Yield*Average Daily Influent Flow Rate*(Influent Substrate Concentration-Effluent Substrate Concentration)*8.34 to calculate the Net Waste Activated Sludge, The Net waste activated sludge is the concentrated waste product that can be treated using the activated sludge process. Net Waste Activated Sludge is denoted by P_x symbol.

How to calculate Net Waste Activated Sludge using this online calculator? To use this online calculator for Net Waste Activated Sludge, enter Observed Cell Yield (Y_obs), Average Daily Influent Flow Rate (Q_a), Influent Substrate Concentration (S_o) & Effluent Substrate Concentration (S) and hit the calculate button. Here is how the Net Waste Activated Sludge calculation can be explained with given input values -> 6.9E+15 = 0.8*1.38888888888889E-05*(0.025-0.015)*8.34.

FAQ

What is Net Waste Activated Sludge?

The Net waste activated sludge is the concentrated waste product that can be treated using the activated sludge process and is represented as P_x = Y_obs*Q_a*(S_o-S)*8.34 or Net Waste Activated Sludge = Observed Cell Yield*Average Daily Influent Flow Rate*(Influent Substrate Concentration-Effluent Substrate Concentration)*8.34. Observed Cell Yield refers to the observed mg of cells produced per mg organic matter removed, Average Daily Influent Flow Rate is the total discharge that comes in the reactor, Influent Substrate Concentration refers to the concentration of organic matter or nutrients in the raw wastewater entering a treatment plant & Effluent Substrate Concentration refers to the concentration of organic matter or nutrients present in the treated wastewater (effluent) that is discharged from a wastewater treatment plant.

How to calculate Net Waste Activated Sludge?

The Net waste activated sludge is the concentrated waste product that can be treated using the activated sludge process is calculated using Net Waste Activated Sludge = Observed Cell Yield*Average Daily Influent Flow Rate*(Influent Substrate Concentration-Effluent Substrate Concentration)*8.34. To calculate Net Waste Activated Sludge, you need Observed Cell Yield (Y_obs), Average Daily Influent Flow Rate (Q_a), Influent Substrate Concentration (S_o) & Effluent Substrate Concentration (S). With our tool, you need to enter the respective value for Observed Cell Yield, Average Daily Influent Flow Rate, Influent Substrate Concentration & Effluent Substrate Concentration and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Net Waste Activated Sludge?

In this formula, Net Waste Activated Sludge uses Observed Cell Yield, Average Daily Influent Flow Rate, Influent Substrate Concentration & Effluent Substrate Concentration. We can use 1 other way(s) to calculate the same, which is/are as follows -

Net Waste Activated Sludge = ((Average Daily Influent Flow Rate*8.34*(Influent Substrate Concentration-Effluent Substrate Concentration))/(BOD Conversion Factor*1.42))-(Theoretical Oxygen Requirement/1.42)

Home

FREE PDFs

🔍 Search