Net Ultimate Bearing Capacity given Depth and Width of Footing Solution

STEP 0: Pre-Calculation Summary
Formula Used
Net Ultimate Bearing Capacity = ((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing)*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight))
qnf = ((Cs*Nc)+((γ*D)*(Nq-1))+(0.5*γ*B*Nγ))
This formula uses 8 Variables
Variables Used
Net Ultimate Bearing Capacity - (Measured in Pascal) - Net Ultimate Bearing Capacity is the minimum net pressure intensity causing shear failure.
Cohesion of Soil - (Measured in Pascal) - Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Depth of Footing - (Measured in Meter) - Depth of Footing is the longer dimension of the footing.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
STEP 1: Convert Input(s) to Base Unit
Cohesion of Soil: 5 Kilopascal --> 5000 Pascal (Check conversion ​here)
Bearing Capacity Factor dependent on Cohesion: 9 --> No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion ​here)
Depth of Footing: 1.01 Meter --> 1.01 Meter No Conversion Required
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
qnf = ((Cs*Nc)+((γ*D)*(Nq-1))+(0.5*γ*B*Nγ)) --> ((5000*9)+((18000*1.01)*(2.01-1))+(0.5*18000*2*1.6))
Evaluating ... ...
qnf = 92161.8
STEP 3: Convert Result to Output's Unit
92161.8 Pascal -->92.1618 Kilonewton per Square Meter (Check conversion ​here)
FINAL ANSWER
92.1618 Kilonewton per Square Meter <-- Net Ultimate Bearing Capacity
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2100+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Terzaghi's Analysis in Water Table is Below the Base of Footing Calculators

Depth of Footing given Bearing Capacity Factor
​ LaTeX ​ Go Depth of Footing in Soil = (Ultimate Bearing Capacity in Soil-((Cohesion in Soil as Kilopascal*Bearing Capacity Factor dependent on Cohesion)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/(Unit Weight of Soil*Bearing Capacity Factor dependent on Surcharge)
Cohesion of Soil given Depth and Width of Footing
​ LaTeX ​ Go Cohesion in Soil as Kilopascal = (Ultimate Bearing Capacity in Soil-((Unit Weight of Soil*Depth of Footing in Soil*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)))/Bearing Capacity Factor dependent on Cohesion
Ultimate Bearing Capacity given Bearing Capacity Factor
​ LaTeX ​ Go Ultimate Bearing Capacity = (Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Unit Weight of Soil*Depth of Footing*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)
Unit Weight of Soil given Depth and Width of Footing
​ LaTeX ​ Go Unit Weight of Soil = (Ultimate Bearing Capacity-(Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion))/((Depth of Footing*Bearing Capacity Factor dependent on Surcharge)+(0.5*Width of Footing*Bearing Capacity Factor dependent on Unit Weight))

Net Ultimate Bearing Capacity given Depth and Width of Footing Formula

​LaTeX ​Go
Net Ultimate Bearing Capacity = ((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing)*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight))
qnf = ((Cs*Nc)+((γ*D)*(Nq-1))+(0.5*γ*B*Nγ))

What is Ultimate Bearing Capacity?

The ultimate bearing capacity of a foundation denotes the maximum load that foundation soils can withstand, and its reasonable determination is one of the pivotal parts in foundation designs. Numerous studies about the ultimate bearing capacity of strip foundations are focused on saturated soils.

How to Calculate Net Ultimate Bearing Capacity given Depth and Width of Footing?

Net Ultimate Bearing Capacity given Depth and Width of Footing calculator uses Net Ultimate Bearing Capacity = ((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing)*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)) to calculate the Net Ultimate Bearing Capacity, The Net Ultimate Bearing Capacity given Depth and Width of Footing is defined as maximum load a foundation can support without soil failure, determined by depth and width of footing. Net Ultimate Bearing Capacity is denoted by qnf symbol.

How to calculate Net Ultimate Bearing Capacity given Depth and Width of Footing using this online calculator? To use this online calculator for Net Ultimate Bearing Capacity given Depth and Width of Footing, enter Cohesion of Soil (Cs), Bearing Capacity Factor dependent on Cohesion (Nc), Unit Weight of Soil (γ), Depth of Footing (D), Bearing Capacity Factor dependent on Surcharge (Nq), Width of Footing (B) & Bearing Capacity Factor dependent on Unit Weight (Nγ) and hit the calculate button. Here is how the Net Ultimate Bearing Capacity given Depth and Width of Footing calculation can be explained with given input values -> 0.09198 = ((5000*9)+((18000*1.01)*(2.01-1))+(0.5*18000*2*1.6)).

FAQ

What is Net Ultimate Bearing Capacity given Depth and Width of Footing?
The Net Ultimate Bearing Capacity given Depth and Width of Footing is defined as maximum load a foundation can support without soil failure, determined by depth and width of footing and is represented as qnf = ((Cs*Nc)+((γ*D)*(Nq-1))+(0.5*γ*B*Nγ)) or Net Ultimate Bearing Capacity = ((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing)*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)). Cohesion of Soil is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil, Depth of Footing is the longer dimension of the footing, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge, Width of Footing is the shorter dimension of the footing & Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.
How to calculate Net Ultimate Bearing Capacity given Depth and Width of Footing?
The Net Ultimate Bearing Capacity given Depth and Width of Footing is defined as maximum load a foundation can support without soil failure, determined by depth and width of footing is calculated using Net Ultimate Bearing Capacity = ((Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+((Unit Weight of Soil*Depth of Footing)*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)). To calculate Net Ultimate Bearing Capacity given Depth and Width of Footing, you need Cohesion of Soil (Cs), Bearing Capacity Factor dependent on Cohesion (Nc), Unit Weight of Soil (γ), Depth of Footing (D), Bearing Capacity Factor dependent on Surcharge (Nq), Width of Footing (B) & Bearing Capacity Factor dependent on Unit Weight (Nγ). With our tool, you need to enter the respective value for Cohesion of Soil, Bearing Capacity Factor dependent on Cohesion, Unit Weight of Soil, Depth of Footing, Bearing Capacity Factor dependent on Surcharge, Width of Footing & Bearing Capacity Factor dependent on Unit Weight and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Net Ultimate Bearing Capacity?
In this formula, Net Ultimate Bearing Capacity uses Cohesion of Soil, Bearing Capacity Factor dependent on Cohesion, Unit Weight of Soil, Depth of Footing, Bearing Capacity Factor dependent on Surcharge, Width of Footing & Bearing Capacity Factor dependent on Unit Weight. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Net Ultimate Bearing Capacity = (Cohesion of Soil*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge in KiloPascal*(Bearing Capacity Factor dependent on Surcharge-1))+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!