Net Resisting Force Offered by Cylinder Head Studs Calculator

✖Number of Studs in Cylinder Head is the total number of studs used in an assembly of cylinder with cylinder head.ⓘ Number of Studs in Cylinder Head [z]			+10% -10%
✖Core Diameter of Cylinder Head Stud is the smallest diameter of the thread of an engine cylinder head stud.ⓘ Core Diameter of Cylinder Head Stud [d_c]			+10% -10%
✖Tensile Stress in Cylinder Head Studs is stress that is developed in a stud due to service loads.ⓘ Tensile Stress in Cylinder Head Studs [σ_ts]			+10% -10%

✖Resisting Force by Cylinder Head Studs is the force that is resisted by the studs of a cylinder head to avoid its deformation.ⓘ Net Resisting Force Offered by Cylinder Head Studs [P_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download IC Engine Formula PDF PDF Image

Net Resisting Force Offered by Cylinder Head Studs Solution

STEP 0: Pre-Calculation Summary

Formula Used

Resisting Force by Cylinder Head Studs = (Number of Studs in Cylinder Head*pi*Core Diameter of Cylinder Head Stud^2)/4*Tensile Stress in Cylinder Head Studs
P_s = (z*pi*d_c^2)/4*σ_ts
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Resisting Force by Cylinder Head Studs - (Measured in Newton) - Resisting Force by Cylinder Head Studs is the force that is resisted by the studs of a cylinder head to avoid its deformation.
Number of Studs in Cylinder Head - Number of Studs in Cylinder Head is the total number of studs used in an assembly of cylinder with cylinder head.
Core Diameter of Cylinder Head Stud - (Measured in Meter) - Core Diameter of Cylinder Head Stud is the smallest diameter of the thread of an engine cylinder head stud.
Tensile Stress in Cylinder Head Studs - (Measured in Pascal) - Tensile Stress in Cylinder Head Studs is stress that is developed in a stud due to service loads.

STEP 1: Convert Input(s) to Base Unit

Number of Studs in Cylinder Head: 6 --> No Conversion Required
Core Diameter of Cylinder Head Stud: 18.5 Millimeter --> 0.0185 Meter (Check conversion here)
Tensile Stress in Cylinder Head Studs: 37 Newton per Square Millimeter --> 37000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_s = (z*pi*d_c^2)/4*σ_ts --> (6*pi*0.0185^2)/4*37000000

Evaluating ... ...

P_s = 59674.1597558564

STEP 3: Convert Result to Output's Unit

59674.1597558564 Newton --> No Conversion Required

FINAL ANSWER

59674.1597558564 ≈ 59674.16 Newton <-- Resisting Force by Cylinder Head Studs

(Calculation completed in 00.007 seconds)

You are here -

Home » Physics » IC Engine » Design of IC Engine Components » Engine Cylinder » Mechanical » Cylinder Head and Stud » Net Resisting Force Offered by Cylinder Head Studs

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Cylinder Head and Stud Calculators

Net Resisting Force Offered by Cylinder Head Studs

LaTeX Go Resisting Force by Cylinder Head Studs = (Number of Studs in Cylinder Head*pi*Core Diameter of Cylinder Head Stud^2)/4*Tensile Stress in Cylinder Head Studs

Thickness of Cylinder Head

LaTeX Go Thickness of Cylinder Head = Inner Diameter of Engine Cylinder*sqrt(0.162*Maximum Gas Pressure Inside Cylinder/Circumferential Stress in Engine Wall)

Minimum Number of Studs for Cylinder Head

LaTeX Go Number of Studs in Cylinder Head = 10*Inner Diameter of Engine Cylinder+4

Maximum Number of Studs for Cylinder Head

LaTeX Go Number of Studs in Cylinder Head = 20*Inner Diameter of Engine Cylinder+4

Net Resisting Force Offered by Cylinder Head Studs Formula

LaTeX Go

Resisting Force by Cylinder Head Studs = (Number of Studs in Cylinder Head*pi*Core Diameter of Cylinder Head Stud^2)/4*Tensile Stress in Cylinder Head Studs
P_s = (z*pi*d_c^2)/4*σ_ts

Advantages of Studs

Studs provide the ability to obtain much more accurate torque values because the studs don't twist during tightening as do bolts. Because the studs remain stationary during nut tightening, the studs stretch in one axis alone, providing much more even and accurate clamping forces.

How to Calculate Net Resisting Force Offered by Cylinder Head Studs?

Net Resisting Force Offered by Cylinder Head Studs calculator uses Resisting Force by Cylinder Head Studs = (Number of Studs in Cylinder Head*pi*Core Diameter of Cylinder Head Stud^2)/4*Tensile Stress in Cylinder Head Studs to calculate the Resisting Force by Cylinder Head Studs, Net resisting force offered by cylinder head studs is the total resisting force developed inside the engine cylinder cover studs. Resisting Force by Cylinder Head Studs is denoted by P_s symbol.

How to calculate Net Resisting Force Offered by Cylinder Head Studs using this online calculator? To use this online calculator for Net Resisting Force Offered by Cylinder Head Studs, enter Number of Studs in Cylinder Head (z), Core Diameter of Cylinder Head Stud (d_c) & Tensile Stress in Cylinder Head Studs (σ_ts) and hit the calculate button. Here is how the Net Resisting Force Offered by Cylinder Head Studs calculation can be explained with given input values -> 59674.16 = (6*pi*0.0185^2)/4*37000000.

FAQ

What is Net Resisting Force Offered by Cylinder Head Studs?

Net resisting force offered by cylinder head studs is the total resisting force developed inside the engine cylinder cover studs and is represented as P_s = (z*pi*d_c^2)/4*σ_ts or Resisting Force by Cylinder Head Studs = (Number of Studs in Cylinder Head*pi*Core Diameter of Cylinder Head Stud^2)/4*Tensile Stress in Cylinder Head Studs. Number of Studs in Cylinder Head is the total number of studs used in an assembly of cylinder with cylinder head, Core Diameter of Cylinder Head Stud is the smallest diameter of the thread of an engine cylinder head stud & Tensile Stress in Cylinder Head Studs is stress that is developed in a stud due to service loads.

How to calculate Net Resisting Force Offered by Cylinder Head Studs?

Net resisting force offered by cylinder head studs is the total resisting force developed inside the engine cylinder cover studs is calculated using Resisting Force by Cylinder Head Studs = (Number of Studs in Cylinder Head*pi*Core Diameter of Cylinder Head Stud^2)/4*Tensile Stress in Cylinder Head Studs. To calculate Net Resisting Force Offered by Cylinder Head Studs, you need Number of Studs in Cylinder Head (z), Core Diameter of Cylinder Head Stud (d_c) & Tensile Stress in Cylinder Head Studs (σ_ts). With our tool, you need to enter the respective value for Number of Studs in Cylinder Head, Core Diameter of Cylinder Head Stud & Tensile Stress in Cylinder Head Studs and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search