Net Heat Supplied to achieve given Cooling Rates for Thin Plates Solution

STEP 0: Pre-Calculation Summary
Formula Used
Net Heat Supplied Per Unit Length = Thickness of Filler Metal/sqrt(Cooling Rate of Thin Plate/(2*pi*Thermal Conductivity*Density of Electrode*Specific Heat Capacity*((Temperature for Cooling Rate-Ambient Temperature)^3)))
Hnet = t/sqrt(Rc/(2*pi*k*ρ*Qc*((Tc-ta)^3)))
This formula uses 1 Constants, 1 Functions, 8 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Net Heat Supplied Per Unit Length - (Measured in Joule per Meter) - Net Heat Supplied Per Unit Length refers to the amount of heat energy transferred per unit length along a material or medium.
Thickness of Filler Metal - (Measured in Meter) - Thickness of Filler Metal refers to the distance between two opposite surfaces of a piece of metal where the filler metal is set.
Cooling Rate of Thin Plate - (Measured in Kelvin per Second) - Cooling Rate of Thin Plate is the rate of decrease of temperature of a particular material which has significantly less thickness.
Thermal Conductivity - (Measured in Watt per Meter per K) - Thermal Conductivity is the rate at which heat passes through a material, defined as heat flow per unit time per unit area with a temperature gradient of one degree per unit distance.
Density of Electrode - (Measured in Kilogram per Cubic Meter) - The Density of Electrode in welding refers to the mass per unit volume of the electrode material, it is the filling material of the weld.
Specific Heat Capacity - (Measured in Joule per Kilogram per K) - Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
Temperature for Cooling Rate - (Measured in Kelvin) - Temperature for Cooling Rate is the temperature at which the cooling rate is calculated.
Ambient Temperature - (Measured in Kelvin) - Ambient Temperature Ambient temperature refers to the air temperature of any object or environment where equipment is stored. In a more general sense, it is the temperature of the surrounding.
STEP 1: Convert Input(s) to Base Unit
Thickness of Filler Metal: 5 Millimeter --> 0.005 Meter (Check conversion ​here)
Cooling Rate of Thin Plate: 0.66 Celsius per Second --> 0.66 Kelvin per Second (Check conversion ​here)
Thermal Conductivity: 10.18 Watt per Meter per K --> 10.18 Watt per Meter per K No Conversion Required
Density of Electrode: 997 Kilogram per Cubic Meter --> 997 Kilogram per Cubic Meter No Conversion Required
Specific Heat Capacity: 4.184 Kilojoule per Kilogram per K --> 4184 Joule per Kilogram per K (Check conversion ​here)
Temperature for Cooling Rate: 500 Celsius --> 773.15 Kelvin (Check conversion ​here)
Ambient Temperature: 37 Celsius --> 310.15 Kelvin (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Hnet = t/sqrt(Rc/(2*pi*k*ρ*Qc*((Tc-ta)^3))) --> 0.005/sqrt(0.66/(2*pi*10.18*997*4184*((773.15-310.15)^3)))
Evaluating ... ...
Hnet = 1001559.52000553
STEP 3: Convert Result to Output's Unit
1001559.52000553 Joule per Meter -->1001.55952000553 Joule per Millimeter (Check conversion ​here)
FINAL ANSWER
1001.55952000553 1001.56 Joule per Millimeter <-- Net Heat Supplied Per Unit Length
(Calculation completed in 00.098 seconds)

Credits

Creator Image
Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verifier Image
Verified by Nishan Poojary
Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi
Nishan Poojary has verified this Calculator and 400+ more calculators!

Heat Flow in Welded Joints Calculators

Peak Temperature Reached at any Point in Material
​ LaTeX ​ Go Peak Temperature Reached at Some Distance = Ambient Temperature+(Net Heat Supplied Per Unit Length*(Melting Temperature of Base Metal-Ambient Temperature))/((Melting Temperature of Base Metal-Ambient Temperature)*sqrt(2*pi*e)*Density of Metal*Thickness of Filler Metal*Specific Heat Capacity*Distance from the Fusion Boundary+Net Heat Supplied Per Unit Length)
Position of Peak Temperature from Fusion Boundary
​ LaTeX ​ Go Distance from the Fusion Boundary = ((Melting Temperature of Base Metal-Temperature Reached at Some Distance)*Net Heat Supplied Per Unit Length)/((Temperature Reached at Some Distance-Ambient Temperature)*(Melting Temperature of Base Metal-Ambient Temperature)*sqrt(2*pi*e)*Density of Electrode*Specific Heat Capacity*Thickness of Filler Metal)
Net Heat Supplied to Weld Area to Raise it to given Temperature from Fusion Boundary
​ LaTeX ​ Go Net Heat Supplied Per Unit Length = ((Temperature Reached at Some Distance-Ambient Temperature)*(Melting Temperature of Base Metal-Ambient Temperature)*sqrt(2*pi*e)*Density of Electrode*Specific Heat Capacity*Thickness of Filler Metal*Distance from the Fusion Boundary)/(Melting Temperature of Base Metal-Temperature Reached at Some Distance)
Cooling Rate for Relatively Thick Plates
​ LaTeX ​ Go Cooling Rate of Thick Plate = (2*pi*Thermal Conductivity*((Temperature for Cooling Rate-Ambient Temperature)^2))/Net Heat Supplied Per Unit Length

Net Heat Supplied to achieve given Cooling Rates for Thin Plates Formula

​LaTeX ​Go
Net Heat Supplied Per Unit Length = Thickness of Filler Metal/sqrt(Cooling Rate of Thin Plate/(2*pi*Thermal Conductivity*Density of Electrode*Specific Heat Capacity*((Temperature for Cooling Rate-Ambient Temperature)^3)))
Hnet = t/sqrt(Rc/(2*pi*k*ρ*Qc*((Tc-ta)^3)))

How heat transfer takes place near heat affected zone ?

Heat transfer in a welded joint is a complex phenomenon involving three dimensional movement of a heat source. Heat from the weld zone is transferred more to the other parts of the base metal by means of conduction. Similarly heat is also lost to surroundings by convection from the surface, with radiation component being relatively small except near the weld pool. Thus the analytical treatment of the weld zone is extremely difficult.

How to Calculate Net Heat Supplied to achieve given Cooling Rates for Thin Plates?

Net Heat Supplied to achieve given Cooling Rates for Thin Plates calculator uses Net Heat Supplied Per Unit Length = Thickness of Filler Metal/sqrt(Cooling Rate of Thin Plate/(2*pi*Thermal Conductivity*Density of Electrode*Specific Heat Capacity*((Temperature for Cooling Rate-Ambient Temperature)^3))) to calculate the Net Heat Supplied Per Unit Length, The Net Heat Supplied to achieve given Cooling Rates for Thin Plates formula is defined as the energy that will result in given cooling of metal weld. Net Heat Supplied Per Unit Length is denoted by Hnet symbol.

How to calculate Net Heat Supplied to achieve given Cooling Rates for Thin Plates using this online calculator? To use this online calculator for Net Heat Supplied to achieve given Cooling Rates for Thin Plates, enter Thickness of Filler Metal (t), Cooling Rate of Thin Plate (Rc), Thermal Conductivity (k), Density of Electrode (ρ), Specific Heat Capacity (Qc), Temperature for Cooling Rate (Tc) & Ambient Temperature (ta) and hit the calculate button. Here is how the Net Heat Supplied to achieve given Cooling Rates for Thin Plates calculation can be explained with given input values -> 1.00156 = 0.005/sqrt(0.66/(2*pi*10.18*997*4184*((773.15-310.15)^3))).

FAQ

What is Net Heat Supplied to achieve given Cooling Rates for Thin Plates?
The Net Heat Supplied to achieve given Cooling Rates for Thin Plates formula is defined as the energy that will result in given cooling of metal weld and is represented as Hnet = t/sqrt(Rc/(2*pi*k*ρ*Qc*((Tc-ta)^3))) or Net Heat Supplied Per Unit Length = Thickness of Filler Metal/sqrt(Cooling Rate of Thin Plate/(2*pi*Thermal Conductivity*Density of Electrode*Specific Heat Capacity*((Temperature for Cooling Rate-Ambient Temperature)^3))). Thickness of Filler Metal refers to the distance between two opposite surfaces of a piece of metal where the filler metal is set, Cooling Rate of Thin Plate is the rate of decrease of temperature of a particular material which has significantly less thickness, Thermal Conductivity is the rate at which heat passes through a material, defined as heat flow per unit time per unit area with a temperature gradient of one degree per unit distance, The Density of Electrode in welding refers to the mass per unit volume of the electrode material, it is the filling material of the weld, Specific Heat Capacity is the heat required to raise the temperature of the unit mass of a given substance by a given amount, Temperature for Cooling Rate is the temperature at which the cooling rate is calculated & Ambient Temperature Ambient temperature refers to the air temperature of any object or environment where equipment is stored. In a more general sense, it is the temperature of the surrounding.
How to calculate Net Heat Supplied to achieve given Cooling Rates for Thin Plates?
The Net Heat Supplied to achieve given Cooling Rates for Thin Plates formula is defined as the energy that will result in given cooling of metal weld is calculated using Net Heat Supplied Per Unit Length = Thickness of Filler Metal/sqrt(Cooling Rate of Thin Plate/(2*pi*Thermal Conductivity*Density of Electrode*Specific Heat Capacity*((Temperature for Cooling Rate-Ambient Temperature)^3))). To calculate Net Heat Supplied to achieve given Cooling Rates for Thin Plates, you need Thickness of Filler Metal (t), Cooling Rate of Thin Plate (Rc), Thermal Conductivity (k), Density of Electrode (ρ), Specific Heat Capacity (Qc), Temperature for Cooling Rate (Tc) & Ambient Temperature (ta). With our tool, you need to enter the respective value for Thickness of Filler Metal, Cooling Rate of Thin Plate, Thermal Conductivity, Density of Electrode, Specific Heat Capacity, Temperature for Cooling Rate & Ambient Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Net Heat Supplied Per Unit Length?
In this formula, Net Heat Supplied Per Unit Length uses Thickness of Filler Metal, Cooling Rate of Thin Plate, Thermal Conductivity, Density of Electrode, Specific Heat Capacity, Temperature for Cooling Rate & Ambient Temperature. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Net Heat Supplied Per Unit Length = ((Temperature Reached at Some Distance-Ambient Temperature)*(Melting Temperature of Base Metal-Ambient Temperature)*sqrt(2*pi*e)*Density of Electrode*Specific Heat Capacity*Thickness of Filler Metal*Distance from the Fusion Boundary)/(Melting Temperature of Base Metal-Temperature Reached at Some Distance)
  • Net Heat Supplied Per Unit Length = (2*pi*Thermal Conductivity*((Temperature for Cooling Rate-Ambient Temperature)^2))/Cooling Rate of Thick Plate
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!