Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open) Calculator

✖Negative Sequence Current in TCO in open conductor fault is consists of balanced three-phase current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation.ⓘ Negative Sequence Current in TCO [I_2(tco)]			+10% -10%
✖Negative Sequence Impedance in TCO in open conductor fault is consists of balanced three-phase impedance phasors which are exactly at 120 degrees apart.ⓘ Negative Sequence Impedance in TCO [Z_2(tco)]			+10% -10%

✖Negative Sequence Voltage in TCO in open conductor fault is consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart.ⓘ Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open) [V_2(tco)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Open Conductor Fault Formulas PDF PDF Image

Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Negative Sequence Voltage in TCO = -(Negative Sequence Current in TCO*Negative Sequence Impedance in TCO)
V_2(tco) = -(I_2(tco)*Z_2(tco))
This formula uses 3 Variables

Variables Used

Negative Sequence Voltage in TCO - (Measured in Volt) - Negative Sequence Voltage in TCO in open conductor fault is consists of balanced three-phase voltage and current phasors which are exactly at 120 degrees apart.
Negative Sequence Current in TCO - (Measured in Ampere) - Negative Sequence Current in TCO in open conductor fault is consists of balanced three-phase current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation.
Negative Sequence Impedance in TCO - (Measured in Ohm) - Negative Sequence Impedance in TCO in open conductor fault is consists of balanced three-phase impedance phasors which are exactly at 120 degrees apart.

STEP 1: Convert Input(s) to Base Unit

Negative Sequence Current in TCO: 0.64 Ampere --> 0.64 Ampere No Conversion Required
Negative Sequence Impedance in TCO: 44.5 Ohm --> 44.5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_2(tco) = -(I_2(tco)*Z_2(tco)) --> -(0.64*44.5)

Evaluating ... ...

V_2(tco) = -28.48

STEP 3: Convert Result to Output's Unit

-28.48 Volt --> No Conversion Required

FINAL ANSWER

-28.48 Volt <-- Negative Sequence Voltage in TCO

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Fault » Open Conductor Fault » Two Conductor Open » Negative Sequence » Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Negative Sequence Calculators

Negative Sequence Voltage using A-Phase Current(Two Conductor Open)

LaTeX Go Negative Sequence Voltage in TCO = -A-Phase Current in TCO*((Positive Sequence Impedance in TCO*Negative Sequence Impedance in TCO)/(Zero Sequence Impedance in TCO+Positive Sequence Impedance in TCO+Negative Sequence Impedance in TCO))

Negative Sequence Current using A-Phase Current(Two Conductor Open)

LaTeX Go Negative Sequence Current in TCO = A-Phase Current in TCO*(Positive Sequence Impedance in TCO/(Zero Sequence Impedance in TCO+Positive Sequence Impedance in TCO+Negative Sequence Impedance in TCO))

Negative Sequence Potential Difference (Two Conductor Open)

LaTeX Go Negative Sequence Potential Difference in TCO = ((-1)*Positive Sequence Potential Difference in TCO-Zero Sequence Potential Difference in TCO)

Negative Sequence Current using Negative Sequence Voltage (Two Conductor Open)

LaTeX Go Negative Sequence Current in TCO = -Negative Sequence Voltage in TCO/Negative Sequence Impedance in TCO

Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open) Formula

LaTeX Go

Negative Sequence Voltage in TCO = -(Negative Sequence Current in TCO*Negative Sequence Impedance in TCO)
V_2(tco) = -(I_2(tco)*Z_2(tco))

What is positive sequence and negative sequence impedance?

Positive Sequence Impedance: The impedance offered by the network to the flow of positive sequence current is called the positive sequence impedance. Negative Sequence Impedance: The negative sequence impedance means the impedance offered by the network to the flows of negative sequence current.

How to Calculate Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open)?

Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open) calculator uses Negative Sequence Voltage in TCO = -(Negative Sequence Current in TCO*Negative Sequence Impedance in TCO) to calculate the Negative Sequence Voltage in TCO, The Negative Sequence Voltage using Negative Sequence Current (Two conductor open) formula is consists of balanced three-phase voltage and current phasors which are exactly at ₁₂₀ degrees apart rotating counterclockwise in ACB rotation. Negative Sequence Voltage in TCO is denoted by V_2(tco) symbol.

How to calculate Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open) using this online calculator? To use this online calculator for Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open), enter Negative Sequence Current in TCO (I_2(tco)) & Negative Sequence Impedance in TCO (Z_2(tco)) and hit the calculate button. Here is how the Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open) calculation can be explained with given input values -> -28.48 = -(0.64*44.5).

FAQ

What is Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open)?

The Negative Sequence Voltage using Negative Sequence Current (Two conductor open) formula is consists of balanced three-phase voltage and current phasors which are exactly at ₁₂₀ degrees apart rotating counterclockwise in ACB rotation and is represented as V_2(tco) = -(I_2(tco)*Z_2(tco)) or Negative Sequence Voltage in TCO = -(Negative Sequence Current in TCO*Negative Sequence Impedance in TCO). Negative Sequence Current in TCO in open conductor fault is consists of balanced three-phase current phasors which are exactly at 120 degrees apart rotating counterclockwise in ACB rotation & Negative Sequence Impedance in TCO in open conductor fault is consists of balanced three-phase impedance phasors which are exactly at 120 degrees apart.

How to calculate Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open)?

The Negative Sequence Voltage using Negative Sequence Current (Two conductor open) formula is consists of balanced three-phase voltage and current phasors which are exactly at ₁₂₀ degrees apart rotating counterclockwise in ACB rotation is calculated using Negative Sequence Voltage in TCO = -(Negative Sequence Current in TCO*Negative Sequence Impedance in TCO). To calculate Negative Sequence Voltage using Negative Sequence Current (Two Conductor Open), you need Negative Sequence Current in TCO (I_2(tco)) & Negative Sequence Impedance in TCO (Z_2(tco)). With our tool, you need to enter the respective value for Negative Sequence Current in TCO & Negative Sequence Impedance in TCO and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Negative Sequence Voltage in TCO?

In this formula, Negative Sequence Voltage in TCO uses Negative Sequence Current in TCO & Negative Sequence Impedance in TCO. We can use 1 other way(s) to calculate the same, which is/are as follows -

Negative Sequence Voltage in TCO = -A-Phase Current in TCO*((Positive Sequence Impedance in TCO*Negative Sequence Impedance in TCO)/(Zero Sequence Impedance in TCO+Positive Sequence Impedance in TCO+Negative Sequence Impedance in TCO))

Home

FREE PDFs

🔍 Search