Moments given Intrados Stresses on Arch Dam Calculator

✖Intrados Stresses is defined as the stresses on the inner wall of the Arch Dam.ⓘ Intrados Stresses [S]			+10% -10%
✖Horizontal Thickness of an Arch, also known as the arch thickness or arch rise, refers to the distance between the intrados and the extrados along the horizontal axis.ⓘ Horizontal Thickness of an Arch [t]			+10% -10%
✖Thrust of Abutments refers to the horizontal force exerted by an arch, vault, or similar structure against its supporting abutments.ⓘ Thrust of Abutments [F]			+10% -10%

✖Moment acting on Arch Dam is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.ⓘ Moments given Intrados Stresses on Arch Dam [M_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Arch Dams Formulas PDF PDF Image

Moments given Intrados Stresses on Arch Dam Solution

STEP 0: Pre-Calculation Summary

Formula Used

Moment acting on Arch Dam = (Intrados Stresses*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch-Thrust of Abutments*Horizontal Thickness of an Arch)/6
M_t = (S*t*t-F*t)/6
This formula uses 4 Variables

Variables Used

Moment acting on Arch Dam - (Measured in Joule) - Moment acting on Arch Dam is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.
Intrados Stresses - (Measured in Pascal) - Intrados Stresses is defined as the stresses on the inner wall of the Arch Dam.
Horizontal Thickness of an Arch - (Measured in Meter) - Horizontal Thickness of an Arch, also known as the arch thickness or arch rise, refers to the distance between the intrados and the extrados along the horizontal axis.
Thrust of Abutments - (Measured in Newton) - Thrust of Abutments refers to the horizontal force exerted by an arch, vault, or similar structure against its supporting abutments.

STEP 1: Convert Input(s) to Base Unit

Intrados Stresses: 250 Newton per Square Meter --> 250 Pascal (Check conversion here)
Horizontal Thickness of an Arch: 1.2 Meter --> 1.2 Meter No Conversion Required
Thrust of Abutments: 63.55 Newton --> 63.55 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_t = (S*t*t-F*t)/6 --> (250*1.2*1.2-63.55*1.2)/6

Evaluating ... ...

M_t = 47.29

STEP 3: Convert Result to Output's Unit

47.29 Joule -->47.29 Newton Meter (Check conversion here)

FINAL ANSWER

47.29 Newton Meter <-- Moment acting on Arch Dam

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Dams » Arch Dams » Moments acting on Arch Dam » Moments given Intrados Stresses on Arch Dam

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Moments acting on Arch Dam Calculators

Moment at Abutments of Arch Dam

LaTeX Go Moment acting on Arch Dam = Radius to Center Line of Arch*((Normal Radial Pressure*Radius to Center Line of Arch)-Thrust of Abutments)*(sin(Angle between Crown and Abundant Radii)/(Angle between Crown and Abundant Radii)-cos(Angle between Crown and Abundant Radii))

Moment at Crown of Arch Dam

LaTeX Go Moment acting on Arch Dam = -Radius to Center Line of Arch*((Normal Radial Pressure*Radius to Center Line of Arch)-Thrust of Abutments)*(1-((sin(Angle between Crown and Abundant Radii))/Angle between Crown and Abundant Radii))

Moments given Intrados Stresses on Arch Dam

LaTeX Go Moment acting on Arch Dam = (Intrados Stresses*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch-Thrust of Abutments*Horizontal Thickness of an Arch)/6

Moments given Extrados Stresses on Arch Dam

LaTeX Go Moment acting on Arch Dam = Extrados Stress*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch+Thrust of Abutments*Horizontal Thickness of an Arch/6

Moments given Intrados Stresses on Arch Dam Formula

LaTeX Go

Moment acting on Arch Dam = (Intrados Stresses*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch-Thrust of Abutments*Horizontal Thickness of an Arch)/6
M_t = (S*t*t-F*t)/6

What is an Arch Dam ?

An arch dam is a concrete dam that is curved upstream in plan. The arch dam is designed so that the force of the water against it, known as hydrostatic pressure, presses against the arch, causing the arch to straighten slightly and strengthening the structure as it pushes into its foundation or abutments.

How to Calculate Moments given Intrados Stresses on Arch Dam?

Moments given Intrados Stresses on Arch Dam calculator uses Moment acting on Arch Dam = (Intrados Stresses*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch-Thrust of Abutments*Horizontal Thickness of an Arch)/6 to calculate the Moment acting on Arch Dam, Moments given Intrados Stresses on Arch Dam is defined as couple produced on inner wall of dam. Moment acting on Arch Dam is denoted by M_t symbol.

How to calculate Moments given Intrados Stresses on Arch Dam using this online calculator? To use this online calculator for Moments given Intrados Stresses on Arch Dam, enter Intrados Stresses (S), Horizontal Thickness of an Arch (t) & Thrust of Abutments (F) and hit the calculate button. Here is how the Moments given Intrados Stresses on Arch Dam calculation can be explained with given input values -> 47.29 = (250*1.2*1.2-63.55*1.2)/6.

FAQ

What is Moments given Intrados Stresses on Arch Dam?

Moments given Intrados Stresses on Arch Dam is defined as couple produced on inner wall of dam and is represented as M_t = (S*t*t-F*t)/6 or Moment acting on Arch Dam = (Intrados Stresses*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch-Thrust of Abutments*Horizontal Thickness of an Arch)/6. Intrados Stresses is defined as the stresses on the inner wall of the Arch Dam, Horizontal Thickness of an Arch, also known as the arch thickness or arch rise, refers to the distance between the intrados and the extrados along the horizontal axis & Thrust of Abutments refers to the horizontal force exerted by an arch, vault, or similar structure against its supporting abutments.

How to calculate Moments given Intrados Stresses on Arch Dam?

Moments given Intrados Stresses on Arch Dam is defined as couple produced on inner wall of dam is calculated using Moment acting on Arch Dam = (Intrados Stresses*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch-Thrust of Abutments*Horizontal Thickness of an Arch)/6. To calculate Moments given Intrados Stresses on Arch Dam, you need Intrados Stresses (S), Horizontal Thickness of an Arch (t) & Thrust of Abutments (F). With our tool, you need to enter the respective value for Intrados Stresses, Horizontal Thickness of an Arch & Thrust of Abutments and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Moment acting on Arch Dam?

In this formula, Moment acting on Arch Dam uses Intrados Stresses, Horizontal Thickness of an Arch & Thrust of Abutments. We can use 3 other way(s) to calculate the same, which is/are as follows -

Moment acting on Arch Dam = -Radius to Center Line of Arch*((Normal Radial Pressure*Radius to Center Line of Arch)-Thrust of Abutments)*(1-((sin(Angle between Crown and Abundant Radii))/Angle between Crown and Abundant Radii))
Moment acting on Arch Dam = Radius to Center Line of Arch*((Normal Radial Pressure*Radius to Center Line of Arch)-Thrust of Abutments)*(sin(Angle between Crown and Abundant Radii)/(Angle between Crown and Abundant Radii)-cos(Angle between Crown and Abundant Radii))
Moment acting on Arch Dam = Extrados Stress*Horizontal Thickness of an Arch*Horizontal Thickness of an Arch+Thrust of Abutments*Horizontal Thickness of an Arch/6

Home

FREE PDFs

🔍 Search