Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam Calculator

✖The Moles of Steam if the amount of moles of steam required for Steam Distillation.ⓘ Moles of Steam [m_S]			+10% -10%
✖The Vaporizing Efficiency is the factor used to take into account the deviation for steam distillation not operating under equilibrium.ⓘ Vaporizing Efficiency [E]			+10% -10%
✖The Mole Fraction of Volatile Comp in Non-Volatiles mixture for Steam Distillation is the mole fraction of volatile component with an essentially non-volatile component.ⓘ Mole Fraction of Volatile Comp in Non-Volatiles [x_A]			+10% -10%
✖The Vapor Pressure of Volatile Component is the vapor pressure exerted by the Volatile component in a mixture with non-volatiles.ⓘ Vapor Pressure of Volatile Component [Pvapor_vc]			+10% -10%
✖The Total Pressure of System is the Total Pressure of the Steam Distillation System under Operation.ⓘ Total Pressure of System [P]			+10% -10%

✖The Moles of Volatile Component is the amount of moles of Volatile component in a mixture for Steam Distillation.ⓘ Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam [m_A]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Distillation Formula PDF PDF Image

Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam Solution

STEP 0: Pre-Calculation Summary

Formula Used

Moles of Volatile Component = Moles of Steam*((Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component)/(Total Pressure of System-Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component))
m_A = m_S*((E*x_A*Pvapor_vc)/(P-E*x_A*Pvapor_vc))
This formula uses 6 Variables

Variables Used

Moles of Volatile Component - (Measured in Mole) - The Moles of Volatile Component is the amount of moles of Volatile component in a mixture for Steam Distillation.
Moles of Steam - (Measured in Mole) - The Moles of Steam if the amount of moles of steam required for Steam Distillation.
Vaporizing Efficiency - The Vaporizing Efficiency is the factor used to take into account the deviation for steam distillation not operating under equilibrium.
Mole Fraction of Volatile Comp in Non-Volatiles - The Mole Fraction of Volatile Comp in Non-Volatiles mixture for Steam Distillation is the mole fraction of volatile component with an essentially non-volatile component.
Vapor Pressure of Volatile Component - (Measured in Pascal) - The Vapor Pressure of Volatile Component is the vapor pressure exerted by the Volatile component in a mixture with non-volatiles.
Total Pressure of System - (Measured in Pascal) - The Total Pressure of System is the Total Pressure of the Steam Distillation System under Operation.

STEP 1: Convert Input(s) to Base Unit

Moles of Steam: 4 Mole --> 4 Mole No Conversion Required
Vaporizing Efficiency: 0.75 --> No Conversion Required
Mole Fraction of Volatile Comp in Non-Volatiles: 0.8 --> No Conversion Required
Vapor Pressure of Volatile Component: 30000 Pascal --> 30000 Pascal No Conversion Required
Total Pressure of System: 100000 Pascal --> 100000 Pascal No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

m_A = m_S*((E*x_A*Pvapor_vc)/(P-E*x_A*Pvapor_vc)) --> 4*((0.75*0.8*30000)/(100000-0.75*0.8*30000))

Evaluating ... ...

m_A = 0.878048780487805

STEP 3: Convert Result to Output's Unit

0.878048780487805 Mole --> No Conversion Required

FINAL ANSWER

0.878048780487805 ≈ 0.878049 Mole <-- Moles of Volatile Component

(Calculation completed in 00.017 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mass Transfer Operations » Distillation » Steam Distillation » Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam

Credits

Created by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has created this Calculator and 300+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Steam Distillation Calculators

Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam

LaTeX Go Moles of Volatile Component = Moles of Steam*((Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component)/(Total Pressure of System-Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component))

Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam at Equilibrium

LaTeX Go Moles of Volatile Component = Moles of Steam*(Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component/(Total Pressure of System-Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component))

Moles of Volatile component Volatilized by Steam with Trace amounts of Non-Volatiles

LaTeX Go Moles of Volatile Component = Moles of Steam*((Vaporizing Efficiency*Vapor Pressure of Volatile Component)/(Total Pressure of System-(Vaporizing Efficiency*Vapor Pressure of Volatile Component)))

Moles of Volatile component Volatilized by Steam with Trace amounts of Non-Volatiles at Equilibrium

LaTeX Go Moles of Volatile Component = Moles of Steam*(Vapor Pressure of Volatile Component/(Total Pressure of System-Vapor Pressure of Volatile Component))

< Important Formulas in Distillation Mass Transfer Operation Calculators

Feed Q-Value in Distillation Column

LaTeX Go Q-value in Mass Transfer = Heat Required to Convert Feed to Saturated Vapor/Molal Latent Heat of Vaporization of Saturated Liq

External Reflux Ratio

LaTeX Go External Reflux Ratio = External Reflux Flowrate to Distillation Column/Distillate Flowrate from Distillation Column

Internal Reflux Ratio

LaTeX Go Internal Reflux Ratio = Internal Reflux Flowrate to Distillation Column/Distillate Flowrate from Distillation Column

Boil-Up Ratio

LaTeX Go Boil-Up Ratio = Boil-Up Flowrate to the Distillation Column/Residue Flowrate from Distillation Column

Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam Formula

LaTeX Go

What is Steam Distillation?

Steam distillation is a separation process that consists of distilling water together with other volatile and non-volatile components. The steam from the boiling water carries the vapor of the volatiles to a condenser; both are cooled and return to the liquid or solid state, while the non-volatile residues remain behind in the boiling container. If, as is usually the case, the volatiles are not miscible with water, they will spontaneously form a distinct phase after condensation, allowing them to be separated by decantation or with a separatory funnel.

How to Calculate Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam?

Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam calculator uses Moles of Volatile Component = Moles of Steam*((Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component)/(Total Pressure of System-Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component)) to calculate the Moles of Volatile Component, The Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam formula is defined as the moles of volatile component vaporised in a mixture of Non-Volatiles by Steam Distillation process. Moles of Volatile Component is denoted by m_A symbol.

How to calculate Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam using this online calculator? To use this online calculator for Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam, enter Moles of Steam (m_S), Vaporizing Efficiency (E), Mole Fraction of Volatile Comp in Non-Volatiles (x_A), Vapor Pressure of Volatile Component (Pvapor_vc) & Total Pressure of System (P) and hit the calculate button. Here is how the Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam calculation can be explained with given input values -> 0.878049 = 4*((0.75*0.8*30000)/(100000-0.75*0.8*30000)).

FAQ

What is Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam?

The Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam formula is defined as the moles of volatile component vaporised in a mixture of Non-Volatiles by Steam Distillation process and is represented as m_A = m_S*((E*x_A*Pvapor_vc)/(P-E*x_A*Pvapor_vc)) or Moles of Volatile Component = Moles of Steam*((Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component)/(Total Pressure of System-Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component)). The Moles of Steam if the amount of moles of steam required for Steam Distillation, The Vaporizing Efficiency is the factor used to take into account the deviation for steam distillation not operating under equilibrium, The Mole Fraction of Volatile Comp in Non-Volatiles mixture for Steam Distillation is the mole fraction of volatile component with an essentially non-volatile component, The Vapor Pressure of Volatile Component is the vapor pressure exerted by the Volatile component in a mixture with non-volatiles & The Total Pressure of System is the Total Pressure of the Steam Distillation System under Operation.

How to calculate Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam?

The Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam formula is defined as the moles of volatile component vaporised in a mixture of Non-Volatiles by Steam Distillation process is calculated using Moles of Volatile Component = Moles of Steam*((Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component)/(Total Pressure of System-Vaporizing Efficiency*Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component)). To calculate Moles of Volatile component Volatilized from mixture of Non-Volatiles by Steam, you need Moles of Steam (m_S), Vaporizing Efficiency (E), Mole Fraction of Volatile Comp in Non-Volatiles (x_A), Vapor Pressure of Volatile Component (Pvapor_vc) & Total Pressure of System (P). With our tool, you need to enter the respective value for Moles of Steam, Vaporizing Efficiency, Mole Fraction of Volatile Comp in Non-Volatiles, Vapor Pressure of Volatile Component & Total Pressure of System and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Moles of Volatile Component?

In this formula, Moles of Volatile Component uses Moles of Steam, Vaporizing Efficiency, Mole Fraction of Volatile Comp in Non-Volatiles, Vapor Pressure of Volatile Component & Total Pressure of System. We can use 3 other way(s) to calculate the same, which is/are as follows -

Moles of Volatile Component = Moles of Steam*(Vapor Pressure of Volatile Component/(Total Pressure of System-Vapor Pressure of Volatile Component))
Moles of Volatile Component = Moles of Steam*((Vaporizing Efficiency*Vapor Pressure of Volatile Component)/(Total Pressure of System-(Vaporizing Efficiency*Vapor Pressure of Volatile Component)))
Moles of Volatile Component = Moles of Steam*(Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component/(Total Pressure of System-Mole Fraction of Volatile Comp in Non-Volatiles*Vapor Pressure of Volatile Component))

Home

FREE PDFs

🔍 Search