LCM of two numbers

Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A Calculator

Physics Chemistry Engineering Financial More >>

↳

Mechanical Aerospace Basic Physics Others and Extra

⤿

Heat and Mass Transfer Automobile Design of Automobile Elements Design of Machine Elements More >>

⤿

Molar Diffusion Conduction Convection Convective Mass Transfer More >>

✖The Diffusion Coefficient (DAB) is the amount of a particular substance that diffuses across a unit area in 1 second under the influence of a gradient of one unit.ⓘ Diffusion Coefficient (DAB) [D]			+10% -10%
✖The Temperature of Gas is the measure of the hotness or coldness of a gas.ⓘ Temperature of Gas [T]			+10% -10%
✖The Film Thickness is the thickness between the wall or the phase boundary or the interface to the other end of the film.ⓘ Film Thickness [δ]			+10% -10%
✖The Partial Pressure of Component A in 1 is the variable which measures the partial pressure of component A in the mixture on the feed side of the diffusing component.ⓘ Partial Pressure of Component A in 1 [P_a1]			+10% -10%
✖The Partial Pressure of Component A in 2 is the variable which measures the partial pressure of component A in the mixture on the other side of the diffusing component.ⓘ Partial Pressure of Component A in 2 [P_a2]			+10% -10%

✖Molar Flux of Diffusing Component A is the amount of substance per unit area per unit time.ⓘ Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A [N_a]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Molar Diffusion Formulas PDF PDF Image

Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A Solution

STEP 0: Pre-Calculation Summary

Formula Used

Molar Flux of Diffusing Component A = (Diffusion Coefficient (DAB)/([R]*Temperature of Gas*Film Thickness))*(Partial Pressure of Component A in 1-Partial Pressure of Component A in 2)
N_a = (D/([R]*T*δ))*(P_a1-P_a2)
This formula uses 1 Constants, 6 Variables

Constants Used

[R] - Universal gas constant Value Taken As 8.31446261815324

Variables Used

Molar Flux of Diffusing Component A - (Measured in Mole per Second Square Meter) - Molar Flux of Diffusing Component A is the amount of substance per unit area per unit time.
Diffusion Coefficient (DAB) - (Measured in Square Meter Per Second) - The Diffusion Coefficient (DAB) is the amount of a particular substance that diffuses across a unit area in 1 second under the influence of a gradient of one unit.
Temperature of Gas - (Measured in Kelvin) - The Temperature of Gas is the measure of the hotness or coldness of a gas.
Film Thickness - (Measured in Meter) - The Film Thickness is the thickness between the wall or the phase boundary or the interface to the other end of the film.
Partial Pressure of Component A in 1 - (Measured in Pascal) - The Partial Pressure of Component A in 1 is the variable which measures the partial pressure of component A in the mixture on the feed side of the diffusing component.
Partial Pressure of Component A in 2 - (Measured in Pascal) - The Partial Pressure of Component A in 2 is the variable which measures the partial pressure of component A in the mixture on the other side of the diffusing component.

STEP 1: Convert Input(s) to Base Unit

Diffusion Coefficient (DAB): 0.007 Square Meter Per Second --> 0.007 Square Meter Per Second No Conversion Required
Temperature of Gas: 298 Kelvin --> 298 Kelvin No Conversion Required
Film Thickness: 0.005 Meter --> 0.005 Meter No Conversion Required
Partial Pressure of Component A in 1: 300000 Pascal --> 300000 Pascal No Conversion Required
Partial Pressure of Component A in 2: 11416 Pascal --> 11416 Pascal No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

N_a = (D/([R]*T*δ))*(P_a1-P_a2) --> (0.007/([R]*298*0.005))*(300000-11416)

Evaluating ... ...

N_a = 163.060900103054

STEP 3: Convert Result to Output's Unit

163.060900103054 Mole per Second Square Meter --> No Conversion Required

FINAL ANSWER

163.060900103054 ≈ 163.0609 Mole per Second Square Meter <-- Molar Flux of Diffusing Component A

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Heat and Mass Transfer » Mechanical » Molar Diffusion » Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A

Credits

Created by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has created this Calculator and 500+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Molar Diffusion Calculators

Molar Flux of Diffusing Component A through Non-Diffusing B based on Partial Pressure of A

LaTeX Go Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/([R]*Temperature of Gas*Film Thickness))*ln((Total Pressure of Gas-Partial Pressure of Component A in 2)/(Total Pressure of Gas-Partial Pressure of Component A in 1))

Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Mole Fraction of A

LaTeX Go Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/([R]*Temperature of Gas*Film Thickness))*(Mole Fraction of Component A in 1-Mole Fraction of Component A in 2)

Molar Flux of Diffusing Component A through Non-Diffusing B based on Mole Fractions of A

LaTeX Go Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/(Film Thickness))*ln((1-Mole Fraction of Component A in 2)/(1-Mole Fraction of Component A in 1))

Convective Mass Transfer Coefficient

LaTeX Go Convective Mass Transfer Coefficient = Mass Flux of Diffusion Component A/(Mass Concentration of Component A in Mixture 1-Mass Concentration of Component A in Mixture 2)

< Equimolar Counter Diffusion Calculators

Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Mole Fraction of A

Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A

LaTeX Go Molar Flux of Diffusing Component A = (Diffusion Coefficient (DAB)/([R]*Temperature of Gas*Film Thickness))*(Partial Pressure of Component A in 1-Partial Pressure of Component A in 2)

Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Concentration of A

LaTeX Go Molar Flux of Diffusing Component A = (Diffusion Coefficient (DAB)/(Film Thickness))*(Concentration of Component A in 1-Concentration of Component A in 2)

< Important Formulas in Diffusion Calculators

Diffusivity by Stefan Tube Method

LaTeX Go Diffusion Coefficient (DAB) = ([R]*Temperature of Gas*Log Mean Partial Pressure of B*Density of Liquid*(Height of Column 1^2-Height of Column 2^2))/(2*Total Pressure of Gas*Molecular Weight A*(Partial Pressure of Component A in 1-Partial Pressure of Component A in 2)*Diffusion Time)

Diffusivity by Twin Bulb Method

LaTeX Go Diffusion Coefficient (DAB) = ((Length of Tube/(Inner Cross Section Area*Diffusion Time))*(ln(Total Pressure of Gas/(Partial Pressure of Component A in 1-Partial Pressure of Component A in 2))))/((1/Volume of Gas 1)+(1/Volume of Gas 2))

Fuller-Schettler-Giddings for Binary Gas Phase Diffusivity

LaTeX Go Diffusion Coefficient (DAB) = ((1.0133*(10^(-7))*(Temperature of Gas^1.75))/(Total Pressure of Gas*(((Total Atomic Diffusion Volume A^(1/3))+(Total Atomic Diffusion Volume B^(1/3)))^2)))*(((1/Molecular Weight A)+(1/Molecular Weight B))^(1/2))

Chapman Enskog Equation for Gas Phase Diffusivity

LaTeX Go Diffusion Coefficient (DAB) = (1.858*(10^(-7))*(Temperature of Gas^(3/2))*(((1/Molecular Weight A)+(1/Molecular Weight B))^(1/2)))/(Total Pressure of Gas*Characteristic Length Parameter^2*Collision Integral)

Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A Formula

LaTeX Go

What is Molar diffusion?

Molecular diffusion, often simply called diffusion, is the thermal motion of all (liquid or gas) particles at temperatures above absolute zero. The rate of this movement is a function of temperature, viscosity of the fluid and the size (mass) of the particles. Diffusion explains the net flux of molecules from a region of higher concentration to one of lower concentration. Once the concentrations are equal the molecules continue to move, but since there is no concentration gradient the process of molecular diffusion has ceased and is instead governed by the process of self-diffusion, originating from the random motion of the molecules. The result of diffusion is a gradual mixing of material such that the distribution of molecules is uniform. Since the molecules are still in motion, but an equilibrium has been established, the end result of molecular diffusion is called a "dynamic equilibrium".

How to Calculate Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A?

Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A calculator uses Molar Flux of Diffusing Component A = (Diffusion Coefficient (DAB)/([R]*Temperature of Gas*Film Thickness))*(Partial Pressure of Component A in 1-Partial Pressure of Component A in 2) to calculate the Molar Flux of Diffusing Component A, The Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A is defined as the molar flux between gaseous components A and B when equimolar diffusion takes place between components A and B. Molar Flux of Diffusing Component A is denoted by N_a symbol.

How to calculate Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A using this online calculator? To use this online calculator for Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A, enter Diffusion Coefficient (DAB) (D), Temperature of Gas (T), Film Thickness (δ), Partial Pressure of Component A in 1 (P_a1) & Partial Pressure of Component A in 2 (P_a2) and hit the calculate button. Here is how the Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A calculation can be explained with given input values -> -6.433522 = (0.007/([R]*298*0.005))*(300000-11416).

FAQ

What is Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A?

The Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A is defined as the molar flux between gaseous components A and B when equimolar diffusion takes place between components A and B and is represented as N_a = (D/([R]*T*δ))*(P_a1-P_a2) or Molar Flux of Diffusing Component A = (Diffusion Coefficient (DAB)/([R]*Temperature of Gas*Film Thickness))*(Partial Pressure of Component A in 1-Partial Pressure of Component A in 2). The Diffusion Coefficient (DAB) is the amount of a particular substance that diffuses across a unit area in 1 second under the influence of a gradient of one unit, The Temperature of Gas is the measure of the hotness or coldness of a gas, The Film Thickness is the thickness between the wall or the phase boundary or the interface to the other end of the film, The Partial Pressure of Component A in 1 is the variable which measures the partial pressure of component A in the mixture on the feed side of the diffusing component & The Partial Pressure of Component A in 2 is the variable which measures the partial pressure of component A in the mixture on the other side of the diffusing component.

How to calculate Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A?

The Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A is defined as the molar flux between gaseous components A and B when equimolar diffusion takes place between components A and B is calculated using Molar Flux of Diffusing Component A = (Diffusion Coefficient (DAB)/([R]*Temperature of Gas*Film Thickness))*(Partial Pressure of Component A in 1-Partial Pressure of Component A in 2). To calculate Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A, you need Diffusion Coefficient (DAB) (D), Temperature of Gas (T), Film Thickness (δ), Partial Pressure of Component A in 1 (P_a1) & Partial Pressure of Component A in 2 (P_a2). With our tool, you need to enter the respective value for Diffusion Coefficient (DAB), Temperature of Gas, Film Thickness, Partial Pressure of Component A in 1 & Partial Pressure of Component A in 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Molar Flux of Diffusing Component A?

In this formula, Molar Flux of Diffusing Component A uses Diffusion Coefficient (DAB), Temperature of Gas, Film Thickness, Partial Pressure of Component A in 1 & Partial Pressure of Component A in 2. We can use 3 other way(s) to calculate the same, which is/are as follows -

Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/(Film Thickness))*ln((1-Mole Fraction of Component A in 2)/(1-Mole Fraction of Component A in 1))
Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/([R]*Temperature of Gas*Film Thickness))*ln((Total Pressure of Gas-Partial Pressure of Component A in 2)/(Total Pressure of Gas-Partial Pressure of Component A in 1))
Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/([R]*Temperature of Gas*Film Thickness))*(Mole Fraction of Component A in 1-Mole Fraction of Component A in 2)

Home

FREE PDFs

🔍 Search