Modulus of Subgrade Reaction for Plate Load Test Calculator

✖The Bearing Pressure is the vertical stress exerted by a load on the pavement surface, affecting the structural integrity and performance of pavement materials.ⓘ Bearing Pressure [P]

+10%

-10%

✖The Modulus of Subgrade Reaction is a measure of the ability of a subgrade to resist deformation under load, typically used in pavement design and construction.ⓘ Modulus of Subgrade Reaction for Plate Load Test [K_sr]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Pavement Materials Formulas PDF PDF Image

Modulus of Subgrade Reaction for Plate Load Test Solution

STEP 0: Pre-Calculation Summary

Formula Used

Modulus of Subgrade Reaction = Bearing Pressure/0.125
K_sr = P/0.125
This formula uses 2 Variables

Variables Used

Modulus of Subgrade Reaction - (Measured in Newton per Cubic Meter) - The Modulus of Subgrade Reaction is a measure of the ability of a subgrade to resist deformation under load, typically used in pavement design and construction.
Bearing Pressure - (Measured in Pascal) - The Bearing Pressure is the vertical stress exerted by a load on the pavement surface, affecting the structural integrity and performance of pavement materials.

STEP 1: Convert Input(s) to Base Unit

Bearing Pressure: 50 Newton per Square Meter --> 50 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K_sr = P/0.125 --> 50/0.125

Evaluating ... ...

K_sr = 400

STEP 3: Convert Result to Output's Unit

400 Newton per Cubic Meter --> No Conversion Required

FINAL ANSWER

400 Newton per Cubic Meter <-- Modulus of Subgrade Reaction

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Transportation System » Pavement Materials » Mechanical » Plate Load Test » Modulus of Subgrade Reaction for Plate Load Test

Credits

Created by Rahul

Dayanada Sagar college of Engineering (DSCE), banglore

Rahul has created this Calculator and 50+ more calculators!

Verified by Kartikay Pandit

National Institute Of Technology (NIT), Hamirpur

Kartikay Pandit has verified this Calculator and 400+ more calculators!

< Plate Load Test Calculators

Bearing Pressure given Modulus of Subgrade Reaction

LaTeX Go Bearing Pressure = Modulus of Subgrade Reaction*0.125

Modulus of Subgrade Reaction for Plate Load Test

LaTeX Go Modulus of Subgrade Reaction = Bearing Pressure/0.125

Modulus of Subgrade Reaction for Plate Load Test Formula

LaTeX Go

Modulus of Subgrade Reaction = Bearing Pressure/0.125
K_sr = P/0.125

Plate Bearing Test

The Plate Bearing Test is a geotechnical test used to assess the bearing capacity of the soil, specifically its ability to support an applied load without excessive settlement or deformation. It's a field test conducted on-site to evaluate the soil's strength and its suitability for construction and foundation design.

How to Calculate Modulus of Subgrade Reaction for Plate Load Test?

Modulus of Subgrade Reaction for Plate Load Test calculator uses Modulus of Subgrade Reaction = Bearing Pressure/0.125 to calculate the Modulus of Subgrade Reaction, Modulus of Subgrade Reaction for Plate Load Test formula is defined as a measure of the ability of the subgrade to resist deformation under a given load, providing a valuable insight into the soil's mechanical properties and its behavior under various loading conditions in pavement materials. Modulus of Subgrade Reaction is denoted by K_sr symbol.

How to calculate Modulus of Subgrade Reaction for Plate Load Test using this online calculator? To use this online calculator for Modulus of Subgrade Reaction for Plate Load Test, enter Bearing Pressure (P) and hit the calculate button. Here is how the Modulus of Subgrade Reaction for Plate Load Test calculation can be explained with given input values -> 4E-10 = 50000000/0.125.

FAQ

What is Modulus of Subgrade Reaction for Plate Load Test?

Modulus of Subgrade Reaction for Plate Load Test formula is defined as a measure of the ability of the subgrade to resist deformation under a given load, providing a valuable insight into the soil's mechanical properties and its behavior under various loading conditions in pavement materials and is represented as K_sr = P/0.125 or Modulus of Subgrade Reaction = Bearing Pressure/0.125. The Bearing Pressure is the vertical stress exerted by a load on the pavement surface, affecting the structural integrity and performance of pavement materials.

How to calculate Modulus of Subgrade Reaction for Plate Load Test?

Modulus of Subgrade Reaction for Plate Load Test formula is defined as a measure of the ability of the subgrade to resist deformation under a given load, providing a valuable insight into the soil's mechanical properties and its behavior under various loading conditions in pavement materials is calculated using Modulus of Subgrade Reaction = Bearing Pressure/0.125. To calculate Modulus of Subgrade Reaction for Plate Load Test, you need Bearing Pressure (P). With our tool, you need to enter the respective value for Bearing Pressure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search