Modulus of Rupture of Rectangular Sample in Four-Point Bending Calculator

✖Load at Fracture Point is the force at the breaking limit of a material beyond which if further load is applied, it will rupture and break apart.ⓘ Load at Fracture Point [F_f]			+10% -10%
✖Length of Section is the the longer or longest dimension of the section.ⓘ Length of Section [L]			+10% -10%
✖Width of Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration.ⓘ Width of Section [B]			+10% -10%
✖Average Section Thickness is the average thickness of sections of casting through which metal flows.ⓘ Average Section Thickness [T]			+10% -10%

✖Modulus of Rupture of Concrete Fourpoint bending is a measure of the tensile strength of concrete beams or slabs.ⓘ Modulus of Rupture of Rectangular Sample in Four-Point Bending [f_4ptr]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mix Design, Modulus of Elasticity and Tensile Strength of Concrete Formulas PDF PDF Image

Modulus of Rupture of Rectangular Sample in Four-Point Bending Solution

STEP 0: Pre-Calculation Summary

Formula Used

Modulus of Rupture of Concrete Fourpoint bending = (Load at Fracture Point*Length of Section)/(Width of Section*(Average Section Thickness^2))
f_4ptr = (F_f*L)/(B*(T^2))
This formula uses 5 Variables

Variables Used

Modulus of Rupture of Concrete Fourpoint bending - (Measured in Pascal) - Modulus of Rupture of Concrete Fourpoint bending is a measure of the tensile strength of concrete beams or slabs.
Load at Fracture Point - (Measured in Newton) - Load at Fracture Point is the force at the breaking limit of a material beyond which if further load is applied, it will rupture and break apart.
Length of Section - (Measured in Meter) - Length of Section is the the longer or longest dimension of the section.
Width of Section - (Measured in Meter) - Width of Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration.
Average Section Thickness - (Measured in Meter) - Average Section Thickness is the average thickness of sections of casting through which metal flows.

STEP 1: Convert Input(s) to Base Unit

Load at Fracture Point: 80 Newton --> 80 Newton No Conversion Required
Length of Section: 180 Millimeter --> 0.18 Meter (Check conversion here)
Width of Section: 100 Millimeter --> 0.1 Meter (Check conversion here)
Average Section Thickness: 1.6 Millimeter --> 0.0016 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_4ptr = (F_f*L)/(B*(T^2)) --> (80*0.18)/(0.1*(0.0016^2))

Evaluating ... ...

f_4ptr = 56250000

STEP 3: Convert Result to Output's Unit

56250000 Pascal -->56.25 Megapascal (Check conversion here)

FINAL ANSWER

56.25 Megapascal <-- Modulus of Rupture of Concrete Fourpoint bending

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Concrete Formulas » Mix Design, Modulus of Elasticity and Tensile Strength of Concrete » Modulus of Rupture » Modulus of Rupture of Rectangular Sample in Four-Point Bending

Credits

Created by Swarnima Singh

NIT Jaipur (mnitj), jaipur

Swarnima Singh has created this Calculator and 10+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Modulus of Rupture Calculators

Modulus of Rupture of Rectangular Sample in Three-Point Bending

LaTeX Go Modulus of Rupture of Concrete Threepoint bending = (3*Load at Fracture Point*Length of Section)/(2*Width of Section*(Average Section Thickness^2))

Modulus of Rupture of Rectangular Sample in Four-Point Bending

LaTeX Go Modulus of Rupture of Concrete Fourpoint bending = (Load at Fracture Point*Length of Section)/(Width of Section*(Average Section Thickness^2))

Modulus of Rupture of Rectangular Sample in Four-Point Bending Formula

LaTeX Go

Modulus of Rupture of Concrete Fourpoint bending = (Load at Fracture Point*Length of Section)/(Width of Section*(Average Section Thickness^2))
f_4ptr = (F_f*L)/(B*(T^2))

What is Modulus of Rupture?

Modulus of rupture is a measure of the strength of any section like concrete, beams, or slabs before failure and its resistance to bending. Modulus of rupture is also known as flexural strength, bend strength, or fracture strength.

What is the significance of Modulus of Rupture?

Modulus of Rupture is defined as the final strength related to the failure of the beams by the flexibility equal to the moment of bending in the fracture divided by part of the beam section. The calculation from the Modulus of Rupture helps us to build structural elements such as beams, cantilevers, shafts, etc.

How to Calculate Modulus of Rupture of Rectangular Sample in Four-Point Bending?

Modulus of Rupture of Rectangular Sample in Four-Point Bending calculator uses Modulus of Rupture of Concrete Fourpoint bending = (Load at Fracture Point*Length of Section)/(Width of Section*(Average Section Thickness^2)) to calculate the Modulus of Rupture of Concrete Fourpoint bending, The Modulus of Rupture of Rectangular Sample in Four-Point Bending formula is defined as it can be used to calculate the tensile strength of concrete beams or slabs when the maximum load is applied over the centre one-fourth portion of the section. Modulus of Rupture of Concrete Fourpoint bending is denoted by f_4ptr symbol.

How to calculate Modulus of Rupture of Rectangular Sample in Four-Point Bending using this online calculator? To use this online calculator for Modulus of Rupture of Rectangular Sample in Four-Point Bending, enter Load at Fracture Point (F_f), Length of Section (L), Width of Section (B) & Average Section Thickness (T) and hit the calculate button. Here is how the Modulus of Rupture of Rectangular Sample in Four-Point Bending calculation can be explained with given input values -> 5.6E-5 = (80*0.18)/(0.1*(0.0016^2)).

FAQ

What is Modulus of Rupture of Rectangular Sample in Four-Point Bending?

The Modulus of Rupture of Rectangular Sample in Four-Point Bending formula is defined as it can be used to calculate the tensile strength of concrete beams or slabs when the maximum load is applied over the centre one-fourth portion of the section and is represented as f_4ptr = (F_f*L)/(B*(T^2)) or Modulus of Rupture of Concrete Fourpoint bending = (Load at Fracture Point*Length of Section)/(Width of Section*(Average Section Thickness^2)). Load at Fracture Point is the force at the breaking limit of a material beyond which if further load is applied, it will rupture and break apart, Length of Section is the the longer or longest dimension of the section, Width of Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration & Average Section Thickness is the average thickness of sections of casting through which metal flows.

How to calculate Modulus of Rupture of Rectangular Sample in Four-Point Bending?

The Modulus of Rupture of Rectangular Sample in Four-Point Bending formula is defined as it can be used to calculate the tensile strength of concrete beams or slabs when the maximum load is applied over the centre one-fourth portion of the section is calculated using Modulus of Rupture of Concrete Fourpoint bending = (Load at Fracture Point*Length of Section)/(Width of Section*(Average Section Thickness^2)). To calculate Modulus of Rupture of Rectangular Sample in Four-Point Bending, you need Load at Fracture Point (F_f), Length of Section (L), Width of Section (B) & Average Section Thickness (T). With our tool, you need to enter the respective value for Load at Fracture Point, Length of Section, Width of Section & Average Section Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search