Modulus of Elasticity in Leaf Spring given Deflection Calculator

✖Spring Load is the instantaneous load applied perpendicular to the specimen cross section.ⓘ Spring Load [W_load]			+10% -10%
✖Length in Spring is the measurement or extent of something from end to end.ⓘ Length in Spring [L]			+10% -10%
✖Deflection of Leaf Spring is how a spring responds when force is applied or released.ⓘ Deflection of Leaf Spring [δ_Leaf]			+10% -10%
✖Number of Plates is the count of plates in the leaf spring.ⓘ Number of Plates [n]			+10% -10%
✖Width of Cross Section is the geometric measurement or extent of the member from side to side.ⓘ Width of Cross Section [b]			+10% -10%
✖Thickness of Section is the dimension through an object, as opposed to length or width.ⓘ Thickness of Section [t]			+10% -10%

✖Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.ⓘ Modulus of Elasticity in Leaf Spring given Deflection [E]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Deflection in Spring Formulas PDF PDF Image

Modulus of Elasticity in Leaf Spring given Deflection Solution

STEP 0: Pre-Calculation Summary

Formula Used

Young's Modulus = (3*Spring Load*Length in Spring^3)/(8*Deflection of Leaf Spring*Number of Plates*Width of Cross Section*Thickness of Section^3)
E = (3*W_load*L^3)/(8*δ_Leaf*n*b*t^3)
This formula uses 7 Variables

Variables Used

Young's Modulus - (Measured in Megapascal) - Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.
Spring Load - (Measured in Newton) - Spring Load is the instantaneous load applied perpendicular to the specimen cross section.
Length in Spring - (Measured in Meter) - Length in Spring is the measurement or extent of something from end to end.
Deflection of Leaf Spring - (Measured in Meter) - Deflection of Leaf Spring is how a spring responds when force is applied or released.
Number of Plates - Number of Plates is the count of plates in the leaf spring.
Width of Cross Section - (Measured in Meter) - Width of Cross Section is the geometric measurement or extent of the member from side to side.
Thickness of Section - (Measured in Meter) - Thickness of Section is the dimension through an object, as opposed to length or width.

STEP 1: Convert Input(s) to Base Unit

Spring Load: 85 Newton --> 85 Newton No Conversion Required
Length in Spring: 4170 Millimeter --> 4.17 Meter (Check conversion here)
Deflection of Leaf Spring: 494 Millimeter --> 0.494 Meter (Check conversion here)
Number of Plates: 8 --> No Conversion Required
Width of Cross Section: 300 Millimeter --> 0.3 Meter (Check conversion here)
Thickness of Section: 460 Millimeter --> 0.46 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

E = (3*W_load*L^3)/(8*δ_Leaf*n*b*t^3) --> (3*85*4.17^3)/(8*0.494*8*0.3*0.46^3)

Evaluating ... ...

E = 20028.4191984019

STEP 3: Convert Result to Output's Unit

20028419198.4019 Pascal -->20028.4191984019 Megapascal (Check conversion here)

FINAL ANSWER

20028.4191984019 ≈ 20028.42 Megapascal <-- Young's Modulus

(Calculation completed in 00.010 seconds)

You are here -

Home » Engineering » Civil » Strength of Materials » Spring » Deflection in Spring » Spring of Square Section Wire » Leaf Springs » For Centrally Loaded Beam » Modulus of Elasticity in Leaf Spring given Deflection

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< For Centrally Loaded Beam Calculators

Modulus of Elasticity in Leaf Spring given Deflection

LaTeX Go Young's Modulus = (3*Spring Load*Length in Spring^3)/(8*Deflection of Leaf Spring*Number of Plates*Width of Cross Section*Thickness of Section^3)

Number of plates given Deflection in Leaf Spring

LaTeX Go Number of Plates = (3*Spring Load*Length in Spring^3)/(8*Deflection of Leaf Spring*Young's Modulus*Width of Cross Section*Thickness of Section^3)

Deflection in Leaf Spring given Load

LaTeX Go Deflection of Leaf Spring = (3*Spring Load*Length in Spring^3)/(8*Young's Modulus*Number of Plates*Width of Cross Section*Thickness of Section^3)

Load given Deflection in Leaf Spring

LaTeX Go Spring Load = (8*Deflection of Leaf Spring*Young's Modulus*Number of Plates*Width of Cross Section*Thickness of Section^3)/(3*Length in Spring^3)

Modulus of Elasticity in Leaf Spring given Deflection Formula

LaTeX Go

Young's Modulus = (3*Spring Load*Length in Spring^3)/(8*Deflection of Leaf Spring*Number of Plates*Width of Cross Section*Thickness of Section^3)
E = (3*W_load*L^3)/(8*δ_Leaf*n*b*t^3)

What is Leaf Spring?

A leaf spring takes the form of a slender arc-shaped length of spring steel of rectangular cross-section. In the most common configuration, the center of the arc provides location for the axle, while loops formed at either end provide for attaching to the vehicle chassis. For very heavy vehicles, a leaf spring can be made from several leaves stacked on top of each other in several layers, often with progressively shorter leaves.

How to Calculate Modulus of Elasticity in Leaf Spring given Deflection?

Modulus of Elasticity in Leaf Spring given Deflection calculator uses Young's Modulus = (3*Spring Load*Length in Spring^3)/(8*Deflection of Leaf Spring*Number of Plates*Width of Cross Section*Thickness of Section^3) to calculate the Young's Modulus, The Modulus of Elasticity in Leaf Spring given Deflection formula is defined as the measure of an object's or substance's resistance to being deformed elastically when stress is applied. Young's Modulus is denoted by E symbol.

How to calculate Modulus of Elasticity in Leaf Spring given Deflection using this online calculator? To use this online calculator for Modulus of Elasticity in Leaf Spring given Deflection, enter Spring Load (W_load), Length in Spring (L), Deflection of Leaf Spring (δ_Leaf), Number of Plates (n), Width of Cross Section (b) & Thickness of Section (t) and hit the calculate button. Here is how the Modulus of Elasticity in Leaf Spring given Deflection calculation can be explained with given input values -> 2.9E-6 = (3*85*4.17^3)/(8*0.494*8*0.3*0.46^3).

FAQ

What is Modulus of Elasticity in Leaf Spring given Deflection?

The Modulus of Elasticity in Leaf Spring given Deflection formula is defined as the measure of an object's or substance's resistance to being deformed elastically when stress is applied and is represented as E = (3*W_load*L^3)/(8*δ_Leaf*n*b*t^3) or Young's Modulus = (3*Spring Load*Length in Spring^3)/(8*Deflection of Leaf Spring*Number of Plates*Width of Cross Section*Thickness of Section^3). Spring Load is the instantaneous load applied perpendicular to the specimen cross section, Length in Spring is the measurement or extent of something from end to end, Deflection of Leaf Spring is how a spring responds when force is applied or released, Number of Plates is the count of plates in the leaf spring, Width of Cross Section is the geometric measurement or extent of the member from side to side & Thickness of Section is the dimension through an object, as opposed to length or width.

How to calculate Modulus of Elasticity in Leaf Spring given Deflection?

The Modulus of Elasticity in Leaf Spring given Deflection formula is defined as the measure of an object's or substance's resistance to being deformed elastically when stress is applied is calculated using Young's Modulus = (3*Spring Load*Length in Spring^3)/(8*Deflection of Leaf Spring*Number of Plates*Width of Cross Section*Thickness of Section^3). To calculate Modulus of Elasticity in Leaf Spring given Deflection, you need Spring Load (W_load), Length in Spring (L), Deflection of Leaf Spring (δ_Leaf), Number of Plates (n), Width of Cross Section (b) & Thickness of Section (t). With our tool, you need to enter the respective value for Spring Load, Length in Spring, Deflection of Leaf Spring, Number of Plates, Width of Cross Section & Thickness of Section and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search