Modulating Signal Amplitude of FM Receiver Calculator

✖Phase Deviation is the peak difference between the instantaneous phase angle of the modulated wave and that of the unmodulated carrier wave.ⓘ Phase Deviation [ΔP]			+10% -10%
✖Proportionality Constant is a constant value that shows the relationship between two proportional quantities.ⓘ Proportionality Constant [K_p]			+10% -10%
✖Modulating Signal Frequency is the number of occurrences of a repeating event per unit of time.ⓘ Modulating Signal Frequency [F_m]			+10% -10%

✖Amplitude of Modulating Signal is the maximum displacement of the signal from its equilibrium or rest position, measured in units of the original signal amplitude.ⓘ Modulating Signal Amplitude of FM Receiver [A_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sideband and Frequency Modulation Formulas PDF PDF Image

Modulating Signal Amplitude of FM Receiver Solution

STEP 0: Pre-Calculation Summary

Formula Used

Amplitude of Modulating Signal = Phase Deviation/(Proportionality Constant*Modulating Signal Frequency)
A_m = ΔP/(K_p*F_m)
This formula uses 4 Variables

Variables Used

Amplitude of Modulating Signal - (Measured in Volt) - Amplitude of Modulating Signal is the maximum displacement of the signal from its equilibrium or rest position, measured in units of the original signal amplitude.
Phase Deviation - Phase Deviation is the peak difference between the instantaneous phase angle of the modulated wave and that of the unmodulated carrier wave.
Proportionality Constant - Proportionality Constant is a constant value that shows the relationship between two proportional quantities.
Modulating Signal Frequency - (Measured in Hertz) - Modulating Signal Frequency is the number of occurrences of a repeating event per unit of time.

STEP 1: Convert Input(s) to Base Unit

Phase Deviation: 912 --> No Conversion Required
Proportionality Constant: 3.3 --> No Conversion Required
Modulating Signal Frequency: 45.157 Hertz --> 45.157 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_m = ΔP/(K_p*F_m) --> 912/(3.3*45.157)

Evaluating ... ...

A_m = 6.12006192536343

STEP 3: Convert Result to Output's Unit

6.12006192536343 Volt --> No Conversion Required

FINAL ANSWER

6.12006192536343 ≈ 6.120062 Volt <-- Amplitude of Modulating Signal

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Analog Communications » Sideband and Frequency Modulation » Modulating Signal Amplitude of FM Receiver

Credits

Created by Suma Madhuri

VIT University (VIT), Chennai

Suma Madhuri has created this Calculator and 50+ more calculators!

Verified by Ritwik Tripathi

Vellore Institute of Technology (VIT Vellore), Vellore

Ritwik Tripathi has verified this Calculator and 100+ more calculators!

< Sideband and Frequency Modulation Calculators

Pre Detection Signal to Noise Ratio

LaTeX Go Pre Detection SNR of DSB-SC = (Amplitude of Carrier Signal DSB-SC^2*Total Power DSB-SC)/(2*Noise Density DSB-SC*Transmission Bandwidth DSBSC)

Transmitted Power of DSB-SC

LaTeX Go Transmitted Power of DSB-SC = Upper Sideband Power in DSB-SC+Lower Sideband Power DSB-SC

Bandwidth of VSB

LaTeX Go Bandwidth of VSB = Maximum Frequency DSB-SC+Vestige Frequency

Bandwidth in DSB-SC

LaTeX Go Bandwidth in DSB-SC = 2*Maximum Frequency DSB-SC

Modulating Signal Amplitude of FM Receiver Formula

LaTeX Go

Amplitude of Modulating Signal = Phase Deviation/(Proportionality Constant*Modulating Signal Frequency)
A_m = ΔP/(K_p*F_m)

What is the effect of the modulating signal amplitude on the FM Receiver?

The modulating signal amplitude has a significant impact on the performance of an FM receiver. It influences various aspects of the receiver's operation, including:

Frequency Deviation: The modulating signal amplitude directly determines the extent to which the carrier wave's frequency deviates from its center frequency. A higher amplitude results in a larger frequency deviation, while a lower amplitude leads to a smaller deviation.

Signal-to-Noise Ratio (SNR): The FM receiver's ability to distinguish between the desired signal and background noise is affected by the modulating signal amplitude. Higher amplitudes generally lead to a better SNR, making the audio clearer and less prone to interference.

How to Calculate Modulating Signal Amplitude of FM Receiver?

Modulating Signal Amplitude of FM Receiver calculator uses Amplitude of Modulating Signal = Phase Deviation/(Proportionality Constant*Modulating Signal Frequency) to calculate the Amplitude of Modulating Signal, The Modulating Signal Amplitude of FM Receiver is defined as the magnitude of the audio signal that is used to vary the frequency of the carrier wave. Amplitude of Modulating Signal is denoted by A_m symbol.

How to calculate Modulating Signal Amplitude of FM Receiver using this online calculator? To use this online calculator for Modulating Signal Amplitude of FM Receiver, enter Phase Deviation (ΔP), Proportionality Constant (K_p) & Modulating Signal Frequency (F_m) and hit the calculate button. Here is how the Modulating Signal Amplitude of FM Receiver calculation can be explained with given input values -> 6.121011 = 912/(3.3*45.157).

FAQ

What is Modulating Signal Amplitude of FM Receiver?

The Modulating Signal Amplitude of FM Receiver is defined as the magnitude of the audio signal that is used to vary the frequency of the carrier wave and is represented as A_m = ΔP/(K_p*F_m) or Amplitude of Modulating Signal = Phase Deviation/(Proportionality Constant*Modulating Signal Frequency). Phase Deviation is the peak difference between the instantaneous phase angle of the modulated wave and that of the unmodulated carrier wave, Proportionality Constant is a constant value that shows the relationship between two proportional quantities & Modulating Signal Frequency is the number of occurrences of a repeating event per unit of time.

How to calculate Modulating Signal Amplitude of FM Receiver?

The Modulating Signal Amplitude of FM Receiver is defined as the magnitude of the audio signal that is used to vary the frequency of the carrier wave is calculated using Amplitude of Modulating Signal = Phase Deviation/(Proportionality Constant*Modulating Signal Frequency). To calculate Modulating Signal Amplitude of FM Receiver, you need Phase Deviation (ΔP), Proportionality Constant (K_p) & Modulating Signal Frequency (F_m). With our tool, you need to enter the respective value for Phase Deviation, Proportionality Constant & Modulating Signal Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search