Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress Calculator

✖Torque Transmitted by Pulley is the amount of torque transmitted by the pulley.ⓘ Torque Transmitted by Pulley [M_t]			+10% -10%
✖Number of Arms in Pulley is the total number of central arms of a pulley.ⓘ Number of Arms in Pulley [N]			+10% -10%
✖Bending stress in pulley's arm is the normal stress that is induced at a point in the arms of a pulley subjected to loads that cause it to bend.ⓘ Bending stress in pulley's arm [σ_b]			+10% -10%

✖Minor Axis of Pulley Arm is the length of the minor or the smallest axis of the elliptical cross-section of a pulley.ⓘ Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress [a]

⎘ Copy

👎

Formula

✖

Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress

Formula

a = {(16 \cdot \frac{M t}{π \cdot N \cdot σ b})}^{\frac{1}{3}}

Example

14.79278 mm = {(16 \cdot \frac{75000 N*mm}{π \cdot 4 \cdot 29.5 N/mm²})}^{\frac{1}{3}}

Calculator

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress Solution

STEP 0: Pre-Calculation Summary

Formula Used

Minor Axis of Pulley Arm = (16*Torque Transmitted by Pulley/(pi*Number of Arms in Pulley*Bending stress in pulley's arm))^(1/3)
a = (16*M_t/(pi*N*σ_b))^(1/3)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Minor Axis of Pulley Arm - (Measured in Meter) - Minor Axis of Pulley Arm is the length of the minor or the smallest axis of the elliptical cross-section of a pulley.
Torque Transmitted by Pulley - (Measured in Newton Meter) - Torque Transmitted by Pulley is the amount of torque transmitted by the pulley.
Number of Arms in Pulley - Number of Arms in Pulley is the total number of central arms of a pulley.
Bending stress in pulley's arm - (Measured in Pascal) - Bending stress in pulley's arm is the normal stress that is induced at a point in the arms of a pulley subjected to loads that cause it to bend.

STEP 1: Convert Input(s) to Base Unit

Torque Transmitted by Pulley: 75000 Newton Millimeter --> 75 Newton Meter (Check conversion here)
Number of Arms in Pulley: 4 --> No Conversion Required
Bending stress in pulley's arm: 29.5 Newton per Square Millimeter --> 29500000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

a = (16*M_t/(pi*N*σ_b))^(1/3) --> (16*75/(pi*4*29500000))^(1/3)

Evaluating ... ...

a = 0.014792779668352

STEP 3: Convert Result to Output's Unit

0.014792779668352 Meter -->14.792779668352 Millimeter (Check conversion here)

FINAL ANSWER

14.792779668352 ≈ 14.79278 Millimeter <-- Minor Axis of Pulley Arm

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Belt Drives » Arms of Cast Iron Pulley » Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Arms of Cast Iron Pulley Calculators

Tangential Force at End of Each Arm of Pulley given Torque Transmitted by Pulley

Go Tangential Force at End of Each Pulley Arm = Torque Transmitted by Pulley/(Radius of Rim of Pulley*(Number of Arms in Pulley/2))

Radius of Rim of Pulley given Torque Transmitted by Pulley

Go Radius of Rim of Pulley = Torque Transmitted by Pulley/(Tangential Force at End of Each Pulley Arm*(Number of Arms in Pulley/2))

Number of Arms of Pulley given Torque Transmitted by Pulley

Go Number of Arms in Pulley = 2*Torque Transmitted by Pulley/(Tangential Force at End of Each Pulley Arm*Radius of Rim of Pulley)

Torque Transmitted by Pulley

Go Torque Transmitted by Pulley = Tangential Force at End of Each Pulley Arm*Radius of Rim of Pulley*(Number of Arms in Pulley/2)

Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress Formula

Minor Axis of Pulley Arm = (16*Torque Transmitted by Pulley/(pi*Number of Arms in Pulley*Bending stress in pulley's arm))^(1/3)
a = (16*M_t/(pi*N*σ_b))^(1/3)

Define Bending Stress?

Bending stress is the normal stress that an object encounters when it is subjected to a large load at a particular point that causes the object to bend and become fatigued. Bending stress occurs when operating industrial equipment and in concrete and metallic structures when they are subjected to a tensile load.

How to Calculate Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress?

Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress calculator uses Minor Axis of Pulley Arm = (16*Torque Transmitted by Pulley/(pi*Number of Arms in Pulley*Bending stress in pulley's arm))^(1/3) to calculate the Minor Axis of Pulley Arm, Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress formula is defined as the shortest axis of the elliptical cross-section of the arms of the pulley which is perpendicular to major axis. Minor Axis of Pulley Arm is denoted by a symbol.

How to calculate Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress using this online calculator? To use this online calculator for Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress, enter Torque Transmitted by Pulley (M_t), Number of Arms in Pulley (N) & Bending stress in pulley's arm (σ_b) and hit the calculate button. Here is how the Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress calculation can be explained with given input values -> 14792.78 = (16*75/(pi*4*29500000))^(1/3).

FAQ

What is Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress?

Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress formula is defined as the shortest axis of the elliptical cross-section of the arms of the pulley which is perpendicular to major axis and is represented as a = (16*M_t/(pi*N*σ_b))^(1/3) or Minor Axis of Pulley Arm = (16*Torque Transmitted by Pulley/(pi*Number of Arms in Pulley*Bending stress in pulley's arm))^(1/3). Torque Transmitted by Pulley is the amount of torque transmitted by the pulley, Number of Arms in Pulley is the total number of central arms of a pulley & Bending stress in pulley's arm is the normal stress that is induced at a point in the arms of a pulley subjected to loads that cause it to bend.

How to calculate Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress?

Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress formula is defined as the shortest axis of the elliptical cross-section of the arms of the pulley which is perpendicular to major axis is calculated using Minor Axis of Pulley Arm = (16*Torque Transmitted by Pulley/(pi*Number of Arms in Pulley*Bending stress in pulley's arm))^(1/3). To calculate Minor Axis of Elliptical Cross-Section of Pulley's Arm given Torque and Bending Stress, you need Torque Transmitted by Pulley (M_t), Number of Arms in Pulley (N) & Bending stress in pulley's arm (σ_b). With our tool, you need to enter the respective value for Torque Transmitted by Pulley, Number of Arms in Pulley & Bending stress in pulley's arm and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Minor Axis of Pulley Arm?

In this formula, Minor Axis of Pulley Arm uses Torque Transmitted by Pulley, Number of Arms in Pulley & Bending stress in pulley's arm. We can use 3 other way(s) to calculate the same, which is/are as follows -

Minor Axis of Pulley Arm = 64*Area moment of inertia of arms/(pi*Major Axis of Pulley Arm^3)
Minor Axis of Pulley Arm = (8*Area moment of inertia of arms/pi)^(1/4)
Minor Axis of Pulley Arm = 1.72*((Bending moment in pulley's arm/(2*Bending stress in pulley's arm))^(1/3))

Home

FREE PDFs

🔍 Search