Minimum Safety Margin given Radius of Fillet Calculator

✖Radius of Fillet measured, a fillet is a rounding of an interior or exterior corner of a part design.ⓘ Radius of Fillet [r]			+10% -10%
✖Radius of Taxiway Centerline taken as guideline, Taxiway centerlines are marked to provide a visual identification of the designated taxiing path.ⓘ Radius of Taxiway Centerline [R]			+10% -10%
✖Deviation of Main Undercarriage observed. The undercarriage of an airplane is the part, including the wheels, which supports the airplane when it is on the ground and when it is landing or taking off.ⓘ Deviation of Main Undercarriage [γ]			+10% -10%
✖Track of Main Undercarriage considered. Undercarriage is a wheeled structure beneath an aircraft, typically retracted when not in use, which supports the aircraft on the ground.ⓘ Track of Main Undercarriage [T]			+10% -10%

✖Minimum Safety Margin, The margin of safety allows extra load range in the event the material is weaker than expected or an allowable load that may be higher than anticipated.ⓘ Minimum Safety Margin given Radius of Fillet [M]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Taxiway Design Formulas PDF PDF Image

Minimum Safety Margin given Radius of Fillet Solution

STEP 0: Pre-Calculation Summary

Formula Used

Minimum Safety Margin = -(Radius of Fillet-Radius of Taxiway Centerline+Deviation of Main Undercarriage+(Track of Main Undercarriage/2))
M = -(r-R+γ+(T/2))
This formula uses 5 Variables

Variables Used

Minimum Safety Margin - Minimum Safety Margin, The margin of safety allows extra load range in the event the material is weaker than expected or an allowable load that may be higher than anticipated.
Radius of Fillet - (Measured in Meter) - Radius of Fillet measured, a fillet is a rounding of an interior or exterior corner of a part design.
Radius of Taxiway Centerline - (Measured in Meter) - Radius of Taxiway Centerline taken as guideline, Taxiway centerlines are marked to provide a visual identification of the designated taxiing path.
Deviation of Main Undercarriage - Deviation of Main Undercarriage observed. The undercarriage of an airplane is the part, including the wheels, which supports the airplane when it is on the ground and when it is landing or taking off.
Track of Main Undercarriage - Track of Main Undercarriage considered. Undercarriage is a wheeled structure beneath an aircraft, typically retracted when not in use, which supports the aircraft on the ground.

STEP 1: Convert Input(s) to Base Unit

Radius of Fillet: 27.5 Meter --> 27.5 Meter No Conversion Required
Radius of Taxiway Centerline: 150 Meter --> 150 Meter No Conversion Required
Deviation of Main Undercarriage: 95 --> No Conversion Required
Track of Main Undercarriage: 7 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M = -(r-R+γ+(T/2)) --> -(27.5-150+95+(7/2))

Evaluating ... ...

M = 24

STEP 3: Convert Result to Output's Unit

24 --> No Conversion Required

FINAL ANSWER

24 <-- Minimum Safety Margin

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Transportation Engineering » Airport Planning and Design » Taxiway and Exit Taxiway Design » Taxiway Design » Design of Fillets » Minimum Safety Margin given Radius of Fillet

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Design of Fillets Calculators

Maximum value of Deviation of main Undercarriage given Radius of Fillet

LaTeX Go Deviation of Main Undercarriage = -(Radius of Fillet-Radius of Taxiway Centerline+Minimum Safety Margin+(Track of Main Undercarriage/2))

Minimum Safety Margin given Radius of Fillet

LaTeX Go Minimum Safety Margin = -(Radius of Fillet-Radius of Taxiway Centerline+Deviation of Main Undercarriage+(Track of Main Undercarriage/2))

Radius of Fillet

LaTeX Go Radius of Fillet = Radius of Taxiway Centerline-(Deviation of Main Undercarriage+Minimum Safety Margin+(Track of Main Undercarriage/2))

Radius of Taxiway Centerline given Radius of Fillet

LaTeX Go Radius of Taxiway Centerline = Radius of Fillet+(Deviation of Main Undercarriage+Minimum Safety Margin+Track of Main Undercarriage/2)

Minimum Safety Margin given Radius of Fillet Formula

LaTeX Go

Minimum Safety Margin = -(Radius of Fillet-Radius of Taxiway Centerline+Deviation of Main Undercarriage+(Track of Main Undercarriage/2))
M = -(r-R+γ+(T/2))

What is the function of Taxiway?

The functions of the Taxiway are to: Provide for aircraft to travel to and from runways to other areas of the airport in an expeditious manner. The system of taxiway is a decisive influence on the capacity of the runway system, and thereby also the overall capacity of the aerodrome.

How to Calculate Minimum Safety Margin given Radius of Fillet?

Minimum Safety Margin given Radius of Fillet calculator uses Minimum Safety Margin = -(Radius of Fillet-Radius of Taxiway Centerline+Deviation of Main Undercarriage+(Track of Main Undercarriage/2)) to calculate the Minimum Safety Margin, Minimum Safety Margin given Radius of Fillet is defined as strength of material minus anticipated stress margin of error, margin of safety. Minimum Safety Margin is denoted by M symbol.

How to calculate Minimum Safety Margin given Radius of Fillet using this online calculator? To use this online calculator for Minimum Safety Margin given Radius of Fillet, enter Radius of Fillet (r), Radius of Taxiway Centerline (R), Deviation of Main Undercarriage (γ) & Track of Main Undercarriage (T) and hit the calculate button. Here is how the Minimum Safety Margin given Radius of Fillet calculation can be explained with given input values -> 24 = -(27.5-150+95+(7/2)).

FAQ

What is Minimum Safety Margin given Radius of Fillet?

Minimum Safety Margin given Radius of Fillet is defined as strength of material minus anticipated stress margin of error, margin of safety and is represented as M = -(r-R+γ+(T/2)) or Minimum Safety Margin = -(Radius of Fillet-Radius of Taxiway Centerline+Deviation of Main Undercarriage+(Track of Main Undercarriage/2)). Radius of Fillet measured, a fillet is a rounding of an interior or exterior corner of a part design, Radius of Taxiway Centerline taken as guideline, Taxiway centerlines are marked to provide a visual identification of the designated taxiing path, Deviation of Main Undercarriage observed. The undercarriage of an airplane is the part, including the wheels, which supports the airplane when it is on the ground and when it is landing or taking off & Track of Main Undercarriage considered. Undercarriage is a wheeled structure beneath an aircraft, typically retracted when not in use, which supports the aircraft on the ground.

How to calculate Minimum Safety Margin given Radius of Fillet?

Minimum Safety Margin given Radius of Fillet is defined as strength of material minus anticipated stress margin of error, margin of safety is calculated using Minimum Safety Margin = -(Radius of Fillet-Radius of Taxiway Centerline+Deviation of Main Undercarriage+(Track of Main Undercarriage/2)). To calculate Minimum Safety Margin given Radius of Fillet, you need Radius of Fillet (r), Radius of Taxiway Centerline (R), Deviation of Main Undercarriage (γ) & Track of Main Undercarriage (T). With our tool, you need to enter the respective value for Radius of Fillet, Radius of Taxiway Centerline, Deviation of Main Undercarriage & Track of Main Undercarriage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Minimum Safety Margin?

In this formula, Minimum Safety Margin uses Radius of Fillet, Radius of Taxiway Centerline, Deviation of Main Undercarriage & Track of Main Undercarriage. We can use 1 other way(s) to calculate the same, which is/are as follows -

Minimum Safety Margin = (Taxiway Width/2)-Maximum Deviation without Filleting-(Track of Main Undercarriage/2)

Home

FREE PDFs

🔍 Search