Minimum required Total Plate Thickness Calculator

✖Constant of Scaled Distance is a number that is used to multiply the dimensions of an object or physical quantity in order to convert it to different measurement scale.ⓘ Constant of Scaled Distance [β]			+10% -10%
✖Pressure Corroded Plate can cause the corrosive substances to penetrate the metal more deeply, leading to more extensive corrosion and potentially weakening the structural integrity of the plate.ⓘ Pressure Corroded Plate [p]			+10% -10%
✖Length Corroded Plate could be determined by the dimensions of the structure or system in which it will be used, the strength and support needed for the plate, and any other relevant factors.ⓘ Length Corroded Plate [l_{corroded plate}]			+10% -10%
✖Maximum Allowable Bending Stress is the maximum stress that a material can withstand while being bent without experiencing permanent deformation or failure.ⓘ Maximum Allowable Bending Stress [f_maximum]			+10% -10%

✖Thickness Corroded Plate which is the chemical reaction of a material with its environment that results in the deterioration or degradation of the material.ⓘ Minimum required Total Plate Thickness [t_{corroded plate}]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Process Equipment Design Formula PDF PDF Image

Minimum required Total Plate Thickness Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickness Corroded Plate = ((Constant of Scaled Distance*Pressure Corroded Plate*(Length Corroded Plate^2))/(Maximum Allowable Bending Stress))^0.5
t_{corroded plate} = ((β*p*(l_{corroded plate}^2))/(f_maximum))^0.5
This formula uses 5 Variables

Variables Used

Thickness Corroded Plate - (Measured in Meter) - Thickness Corroded Plate which is the chemical reaction of a material with its environment that results in the deterioration or degradation of the material.
Constant of Scaled Distance - Constant of Scaled Distance is a number that is used to multiply the dimensions of an object or physical quantity in order to convert it to different measurement scale.
Pressure Corroded Plate - (Measured in Pascal) - Pressure Corroded Plate can cause the corrosive substances to penetrate the metal more deeply, leading to more extensive corrosion and potentially weakening the structural integrity of the plate.
Length Corroded Plate - (Measured in Meter) - Length Corroded Plate could be determined by the dimensions of the structure or system in which it will be used, the strength and support needed for the plate, and any other relevant factors.
Maximum Allowable Bending Stress - (Measured in Pascal) - Maximum Allowable Bending Stress is the maximum stress that a material can withstand while being bent without experiencing permanent deformation or failure.

STEP 1: Convert Input(s) to Base Unit

Constant of Scaled Distance: 2 --> No Conversion Required
Pressure Corroded Plate: 0.02 Newton per Square Millimeter --> 20000 Pascal (Check conversion here)
Length Corroded Plate: 1009 Millimeter --> 1.009 Meter (Check conversion here)
Maximum Allowable Bending Stress: 137 Newton per Square Millimeter --> 137000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_{corroded plate} = ((β*p*(l_{corroded plate}^2))/(f_maximum))^0.5 --> ((2*20000*(1.009^2))/(137000000))^0.5

Evaluating ... ...

t_{corroded plate} = 0.0172409375327242

STEP 3: Convert Result to Output's Unit

0.0172409375327242 Meter -->17.2409375327242 Millimeter (Check conversion here)

FINAL ANSWER

17.2409375327242 ≈ 17.24094 Millimeter <-- Thickness Corroded Plate

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Storage Vessels » Design of Shell » Minimum required Total Plate Thickness

Credits

Created by Heet

Thadomal Shahani Engineering College (Tsec), Mumbai

Heet has created this Calculator and 200+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Design of Shell Calculators

Minimum Thickness of Shell at Bottom

LaTeX Go Minimum Thickness of Shell = ((Hydrostatic Pressure*Nominal Tank Diameter)/(2*Allowable Stress*Joint Efficiency for Shell))+Corrosion Allowance

Circumferential Length of Plate

LaTeX Go Circumferential Length of the Plate = (pi*Nominal Tank Diameter)-(Weld Allowance*Number of Plates)

Pressure at Bottom of Tank

LaTeX Go Hydrostatic Pressure = 10*Density of Liquid Stored*(Height of Tank-0.3)

Number of Layers

LaTeX Go Number of Layers = Height of Tank/Width of Plate

Minimum required Total Plate Thickness Formula

LaTeX Go

What is Design Thickness?

Design thickness is a term used in structural engineering to refer to the thickness of a structural element (such as a beam, column, or plate) that has been calculated or specified based on the design requirements of the structure. The design thickness is the thickness that has been calculated or specified based on the structural requirements of the beam and the strength and deformability of the soil or foundation on which the beam will be supported. The design thickness of a bottom plate is typically determined by a structural engineer or using structural engineering software, and is used to ensure that the bottom plate is able to safely carry the loads that will be applied to it during the life of the structure.

How to Calculate Minimum required Total Plate Thickness?

Minimum required Total Plate Thickness calculator uses Thickness Corroded Plate = ((Constant of Scaled Distance*Pressure Corroded Plate*(Length Corroded Plate^2))/(Maximum Allowable Bending Stress))^0.5 to calculate the Thickness Corroded Plate, Minimum required Total Plate Thickness for a structural component depends on a variety of factors, including the type of material used, the loading conditions, the design code being followed, and the required level of structural integrity. Thickness Corroded Plate is denoted by t_{corroded plate} symbol.

How to calculate Minimum required Total Plate Thickness using this online calculator? To use this online calculator for Minimum required Total Plate Thickness, enter Constant of Scaled Distance (β), Pressure Corroded Plate (p), Length Corroded Plate (l_{corroded plate}) & Maximum Allowable Bending Stress (f_maximum) and hit the calculate button. Here is how the Minimum required Total Plate Thickness calculation can be explained with given input values -> 17240.94 = ((2*20000*(1.009^2))/(137000000))^0.5.

FAQ

What is Minimum required Total Plate Thickness?

Minimum required Total Plate Thickness for a structural component depends on a variety of factors, including the type of material used, the loading conditions, the design code being followed, and the required level of structural integrity and is represented as t_{corroded plate} = ((β*p*(l_{corroded plate}^2))/(f_maximum))^0.5 or Thickness Corroded Plate = ((Constant of Scaled Distance*Pressure Corroded Plate*(Length Corroded Plate^2))/(Maximum Allowable Bending Stress))^0.5. Constant of Scaled Distance is a number that is used to multiply the dimensions of an object or physical quantity in order to convert it to different measurement scale, Pressure Corroded Plate can cause the corrosive substances to penetrate the metal more deeply, leading to more extensive corrosion and potentially weakening the structural integrity of the plate, Length Corroded Plate could be determined by the dimensions of the structure or system in which it will be used, the strength and support needed for the plate, and any other relevant factors & Maximum Allowable Bending Stress is the maximum stress that a material can withstand while being bent without experiencing permanent deformation or failure.

How to calculate Minimum required Total Plate Thickness?

Minimum required Total Plate Thickness for a structural component depends on a variety of factors, including the type of material used, the loading conditions, the design code being followed, and the required level of structural integrity is calculated using Thickness Corroded Plate = ((Constant of Scaled Distance*Pressure Corroded Plate*(Length Corroded Plate^2))/(Maximum Allowable Bending Stress))^0.5. To calculate Minimum required Total Plate Thickness, you need Constant of Scaled Distance (β), Pressure Corroded Plate (p), Length Corroded Plate (l_{corroded plate}) & Maximum Allowable Bending Stress (f_maximum). With our tool, you need to enter the respective value for Constant of Scaled Distance, Pressure Corroded Plate, Length Corroded Plate & Maximum Allowable Bending Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search