Minimum Frequency to Avoid Saturation Calculator

✖Peak Voltage is defined a the maximum amplitude achieved by the voltage wave.ⓘ Peak Voltage [V_m]			+10% -10%
✖Secondary turns of coil is number of turns of 2nd winding or number of turns of secondary winding of transformer.ⓘ Secondary Turns of Coil [N₂]			+10% -10%
✖The area of coil is the region bounded by the shape of an object. The space covered by the figure or any two-dimensional geometric shape, in a plane, is the area of the shape.ⓘ Area of Coil [A]			+10% -10%

✖Frequency is defined as the frequency which is needed to avoid the saturation.ⓘ Minimum Frequency to Avoid Saturation [f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Magnetic Circuit Formulas PDF PDF Image

Minimum Frequency to Avoid Saturation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Frequency = Peak Voltage/(2*pi*Secondary Turns of Coil*Area of Coil)
f = V_m/(2*pi*N₂*A)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Frequency - (Measured in Hertz) - Frequency is defined as the frequency which is needed to avoid the saturation.
Peak Voltage - (Measured in Volt) - Peak Voltage is defined a the maximum amplitude achieved by the voltage wave.
Secondary Turns of Coil - Secondary turns of coil is number of turns of 2nd winding or number of turns of secondary winding of transformer.
Area of Coil - (Measured in Square Meter) - The area of coil is the region bounded by the shape of an object. The space covered by the figure or any two-dimensional geometric shape, in a plane, is the area of the shape.

STEP 1: Convert Input(s) to Base Unit

Peak Voltage: 440 Volt --> 440 Volt No Conversion Required
Secondary Turns of Coil: 18 --> No Conversion Required
Area of Coil: 0.25 Square Meter --> 0.25 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f = V_m/(2*pi*N₂*A) --> 440/(2*pi*18*0.25)

Evaluating ... ...

f = 15.5618166578742

STEP 3: Convert Result to Output's Unit

15.5618166578742 Hertz --> No Conversion Required

FINAL ANSWER

15.5618166578742 ≈ 15.56182 Hertz <-- Frequency

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Electrical Circuit » Magnetic Circuit » Electrical Specifications » Minimum Frequency to Avoid Saturation

Credits

Created by Parminder Singh

Chandigarh University (CU), Punjab

Parminder Singh has created this Calculator and 100+ more calculators!

Verified by Aman Dhussawat

GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI

Aman Dhussawat has verified this Calculator and 100+ more calculators!

< Electrical Specifications Calculators

Forces on Current Carrying Wires

LaTeX Go Force = Magnetic Flux Density*Electric Current*Length of Conductor*sin(Angle between Vectors)

Forces on Charges Moving in Magnetic Fields

LaTeX Go Force = Electric Charge*Charge Velocity*Magnetic Flux Density*sin(Angle between Vectors)

Voltages Induced in Field Cutting Conductors

LaTeX Go Voltage = Magnetic Flux Density*Length of Conductor*Charge Velocity

Energy Stored in Magnetic Field

LaTeX Go Energy = Magnetic Flux Density/(Magnetic Permeability of a Medium^2)

Minimum Frequency to Avoid Saturation Formula

LaTeX Go

Frequency = Peak Voltage/(2*pi*Secondary Turns of Coil*Area of Coil)
f = V_m/(2*pi*N₂*A)

What is magnetic saturation?

Saturation is the state reached when an increase in applied external magnetic field H cannot increase the magnetization of the material further, so the total magnetic flux density B more or less levels off. Saturation is a characteristic of ferromagnetic and ferrimagnetic materials, such as iron, nickel, cobalt and their alloys. Different ferromagnetic materials have different saturation levels.

How to Calculate Minimum Frequency to Avoid Saturation?

Minimum Frequency to Avoid Saturation calculator uses Frequency = Peak Voltage/(2*pi*Secondary Turns of Coil*Area of Coil) to calculate the Frequency, The Minimum Frequency to avoid Saturation formula is defined as the least amount of frequency needs to avoid the saturation of magnetic field. Frequency is denoted by f symbol.

How to calculate Minimum Frequency to Avoid Saturation using this online calculator? To use this online calculator for Minimum Frequency to Avoid Saturation, enter Peak Voltage (V_m), Secondary Turns of Coil (N₂) & Area of Coil (A) and hit the calculate button. Here is how the Minimum Frequency to Avoid Saturation calculation can be explained with given input values -> 15.56182 = 440/(2*pi*18*0.25).

FAQ

What is Minimum Frequency to Avoid Saturation?

The Minimum Frequency to avoid Saturation formula is defined as the least amount of frequency needs to avoid the saturation of magnetic field and is represented as f = V_m/(2*pi*N₂*A) or Frequency = Peak Voltage/(2*pi*Secondary Turns of Coil*Area of Coil). Peak Voltage is defined a the maximum amplitude achieved by the voltage wave, Secondary turns of coil is number of turns of 2nd winding or number of turns of secondary winding of transformer & The area of coil is the region bounded by the shape of an object. The space covered by the figure or any two-dimensional geometric shape, in a plane, is the area of the shape.

How to calculate Minimum Frequency to Avoid Saturation?

The Minimum Frequency to avoid Saturation formula is defined as the least amount of frequency needs to avoid the saturation of magnetic field is calculated using Frequency = Peak Voltage/(2*pi*Secondary Turns of Coil*Area of Coil). To calculate Minimum Frequency to Avoid Saturation, you need Peak Voltage (V_m), Secondary Turns of Coil (N₂) & Area of Coil (A). With our tool, you need to enter the respective value for Peak Voltage, Secondary Turns of Coil & Area of Coil and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search