Mesh Number Calculator

✖Aperture Size is the minimum clear space between the edge of opening in a screen.ⓘ Aperture Size [w]			+10% -10%
✖Diameter Of Wire is a straight line passing from side to side through the center of the wire we are interested in.ⓘ Diameter Of Wire [d]			+10% -10%

✖Mesh Number is the number of open slots per linear inch.ⓘ Mesh Number [m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Operations Formula PDF PDF Image

Mesh Number Solution

STEP 0: Pre-Calculation Summary

Formula Used

Mesh Number = 1/(Aperture Size+Diameter Of Wire)
m = 1/(w+d)
This formula uses 3 Variables

Variables Used

Mesh Number - (Measured in 1 per Meter) - Mesh Number is the number of open slots per linear inch.
Aperture Size - (Measured in Meter) - Aperture Size is the minimum clear space between the edge of opening in a screen.
Diameter Of Wire - (Measured in Meter) - Diameter Of Wire is a straight line passing from side to side through the center of the wire we are interested in.

STEP 1: Convert Input(s) to Base Unit

Aperture Size: 5 Centimeter --> 0.05 Meter (Check conversion here)
Diameter Of Wire: 3 Centimeter --> 0.03 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

m = 1/(w+d) --> 1/(0.05+0.03)

Evaluating ... ...

m = 12.5

STEP 3: Convert Result to Output's Unit

12.5 1 per Meter -->0.125 1 per Centimeter (Check conversion here)

FINAL ANSWER

0.125 1 per Centimeter <-- Mesh Number

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mechanical Operations » Mechanical Separation » Mesh Number

Credits

Created by Qazi Muneeb

NIT Srinagar (NIT SRI), Srinagar, Kashmir

Qazi Muneeb has created this Calculator and 25+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Mechanical Separation Calculators

Mass Flow Rate of over flow

LaTeX Go Mass Flow Rate of Overflow = Mass Flow Rate of Feed*((Mass Fraction of Material A in Feed-Mass Fraction of Material A in Underflow)/(Mass Fraction of Material A in Overflow-Mass Fraction of Material A in Underflow))

Mass Flow Rate of Feed

LaTeX Go Mass Flow Rate of Feed = Mass Flow Rate of Underflow+Mass Flow Rate of Overflow

Aperture Size

LaTeX Go Aperture Size = (1/Mesh Number)-Diameter Of Wire

Mesh Number

LaTeX Go Mesh Number = 1/(Aperture Size+Diameter Of Wire)

Mesh Number Formula

LaTeX Go

Mesh Number = 1/(Aperture Size+Diameter Of Wire)
m = 1/(w+d)

What are Grizzly screens?

Grizzly screens use a series of cascading grizzly bars or “fingers” to turn over material (for more efficient screening) and separate the material by size into course “overs” that feed across the screen and fines, or “through's”, that fall between the fingers.

How to Calculate Mesh Number?

Mesh Number calculator uses Mesh Number = 1/(Aperture Size+Diameter Of Wire) to calculate the Mesh Number, Mesh Number is the number of open slots per linear inch eg - 30 mesh screen means 1 inch consists of 30 openings . Mesh Number is denoted by m symbol.

How to calculate Mesh Number using this online calculator? To use this online calculator for Mesh Number, enter Aperture Size (w) & Diameter Of Wire (d) and hit the calculate button. Here is how the Mesh Number calculation can be explained with given input values -> 0.00125 = 1/(0.05+0.03).

FAQ

What is Mesh Number?

Mesh Number is the number of open slots per linear inch eg - 30 mesh screen means 1 inch consists of 30 openings and is represented as m = 1/(w+d) or Mesh Number = 1/(Aperture Size+Diameter Of Wire). Aperture Size is the minimum clear space between the edge of opening in a screen & Diameter Of Wire is a straight line passing from side to side through the center of the wire we are interested in.

How to calculate Mesh Number?

Mesh Number is the number of open slots per linear inch eg - 30 mesh screen means 1 inch consists of 30 openings is calculated using Mesh Number = 1/(Aperture Size+Diameter Of Wire). To calculate Mesh Number, you need Aperture Size (w) & Diameter Of Wire (d). With our tool, you need to enter the respective value for Aperture Size & Diameter Of Wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search