Membrane Water Diffusivity Based on Solution Diffusion Model Calculator

✖Mass Water flux is defined as the rate of movement of water across a surface or through a medium.ⓘ Mass Water Flux [J_wm]			+10% -10%
✖Temperature is a physical quantity that expresses quantitatively the attribute of hotness or coldness.ⓘ Temperature [T]			+10% -10%
✖Membrane Layer Thickness is the distance between the two outer surfaces of a membrane. It is typically measured in nanometers (nm), which are billionths of a meter.ⓘ Membrane Layer Thickness [l_m]			+10% -10%
✖Membrane water concentration (MWC) is the concentration of water in a membrane. It is typically measured in moles per cubic meter (kg/m^3).ⓘ Membrane Water Concentration [C_w]			+10% -10%
✖The partial molar volume of a substance in a mixture is the change in volume of the mixture per mole of that substance added, at constant temperature and pressure.ⓘ Partial Molar Volume [V_l]			+10% -10%
✖Membrane pressure drop is the difference in pressure between the inlet and outlet of a membrane system, housing (pressure vessel), or element.ⓘ Membrane Pressure Drop [ΔP_atm]			+10% -10%
✖Osmotic pressure is the minimum pressure that must be applied to a solution to prevent the inward flow of its pure solvent across a semipermeable membrane.ⓘ Osmotic Pressure [Δπ]			+10% -10%

✖Membrane water diffusivity is the rate at which water molecules diffuse across a membrane. It is typically measured in square meters per second (m^2/s).ⓘ Membrane Water Diffusivity Based on Solution Diffusion Model [D_w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Membrane Water Diffusivity Based on Solution Diffusion Model Solution

STEP 0: Pre-Calculation Summary

Formula Used

Membrane Water Diffusivity = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/((Membrane Water Concentration*Partial Molar Volume)*(Membrane Pressure Drop-Osmotic Pressure))
D_w = (J_wm*[R]*T*l_m)/((C_w*V_l)*(ΔP_atm-Δπ))
This formula uses 1 Constants, 8 Variables

Constants Used

[R] - Universal gas constant Value Taken As 8.31446261815324

Variables Used

Membrane Water Diffusivity - (Measured in Square Meter per Second) - Membrane water diffusivity is the rate at which water molecules diffuse across a membrane. It is typically measured in square meters per second (m^2/s).
Mass Water Flux - (Measured in Kilogram per Second per Square Meter) - Mass Water flux is defined as the rate of movement of water across a surface or through a medium.
Temperature - (Measured in Kelvin) - Temperature is a physical quantity that expresses quantitatively the attribute of hotness or coldness.
Membrane Layer Thickness - (Measured in Meter) - Membrane Layer Thickness is the distance between the two outer surfaces of a membrane. It is typically measured in nanometers (nm), which are billionths of a meter.
Membrane Water Concentration - (Measured in Kilogram per Cubic Meter) - Membrane water concentration (MWC) is the concentration of water in a membrane. It is typically measured in moles per cubic meter (kg/m^3).
Partial Molar Volume - (Measured in Cubic Meter per Mole) - The partial molar volume of a substance in a mixture is the change in volume of the mixture per mole of that substance added, at constant temperature and pressure.
Membrane Pressure Drop - (Measured in Pascal) - Membrane pressure drop is the difference in pressure between the inlet and outlet of a membrane system, housing (pressure vessel), or element.
Osmotic Pressure - (Measured in Pascal) - Osmotic pressure is the minimum pressure that must be applied to a solution to prevent the inward flow of its pure solvent across a semipermeable membrane.

STEP 1: Convert Input(s) to Base Unit

Mass Water Flux: 6.3E-05 Kilogram per Second per Square Meter --> 6.3E-05 Kilogram per Second per Square Meter No Conversion Required
Temperature: 298 Kelvin --> 298 Kelvin No Conversion Required
Membrane Layer Thickness: 1.3E-05 Meter --> 1.3E-05 Meter No Conversion Required
Membrane Water Concentration: 156 Kilogram per Cubic Meter --> 156 Kilogram per Cubic Meter No Conversion Required
Partial Molar Volume: 0.018 Cubic Meter per Kilomole --> 1.8E-05 Cubic Meter per Mole (Check conversion here)
Membrane Pressure Drop: 81.32 Atmosphere Technical --> 7974767.78 Pascal (Check conversion here)
Osmotic Pressure: 39.5 Atmosphere Technical --> 3873626.75 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_w = (J_wm*[R]*T*l_m)/((C_w*V_l)*(ΔP_atm-Δπ)) --> (6.3E-05*[R]*298*1.3E-05)/((156*1.8E-05)*(7974767.78-3873626.75))

Evaluating ... ...

D_w = 1.7621080831119E-10

STEP 3: Convert Result to Output's Unit

1.7621080831119E-10 Square Meter per Second --> No Conversion Required

FINAL ANSWER

1.7621080831119E-10 ≈ 1.8E-10 Square Meter per Second <-- Membrane Water Diffusivity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Fluid Dynamics » Properties of Fluids » Membrane Water Diffusivity Based on Solution Diffusion Model

Credits

Created by Harsh Kadam

Shri Guru Gobind Singhji Institute of Engineering and Technology (SGGS), Nanded

Harsh Kadam has created this Calculator and 50+ more calculators!

Verified by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has verified this Calculator and 200+ more calculators!

< Properties of Fluids Calculators

Specific Total Energy

LaTeX Go Specific Total Energy = Total Energy/Mass

Specific Volume of Fluid given Mass

LaTeX Go Specific Volume = Volume/Mass

Density of Fluid

LaTeX Go Density = Mass/Volume

Specific Volume given Density

LaTeX Go Specific Volume = 1/Density

Membrane Water Diffusivity Based on Solution Diffusion Model Formula

LaTeX Go

What is the Solution Diffusion Model?

The solution–diffusion model assumes that the pressure within a membrane is uniform and that the chemical potential gradient of a permeant across the membrane is represented only as a concentration gradient.
The pore-flow model assumes that the permeant. concentration within a membrane is uniform.

How to Calculate Membrane Water Diffusivity Based on Solution Diffusion Model?

Membrane Water Diffusivity Based on Solution Diffusion Model calculator uses Membrane Water Diffusivity = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/((Membrane Water Concentration*Partial Molar Volume)*(Membrane Pressure Drop-Osmotic Pressure)) to calculate the Membrane Water Diffusivity, Membrane water diffusivity based on solution diffusion model is the rate at which water molecules diffuse across a membrane driven by a concentration gradient. Membrane Water Diffusivity is denoted by D_w symbol.

How to calculate Membrane Water Diffusivity Based on Solution Diffusion Model using this online calculator? To use this online calculator for Membrane Water Diffusivity Based on Solution Diffusion Model, enter Mass Water Flux (J_wm), Temperature (T), Membrane Layer Thickness (l_m), Membrane Water Concentration (C_w), Partial Molar Volume (V_l), Membrane Pressure Drop (ΔP_atm) & Osmotic Pressure (Δπ) and hit the calculate button. Here is how the Membrane Water Diffusivity Based on Solution Diffusion Model calculation can be explained with given input values -> 1.8E-10 = (6.3E-05*[R]*298*1.3E-05)/((156*1.8E-05)*(7974767.78-3873626.75)).

FAQ

What is Membrane Water Diffusivity Based on Solution Diffusion Model?

Membrane water diffusivity based on solution diffusion model is the rate at which water molecules diffuse across a membrane driven by a concentration gradient and is represented as D_w = (J_wm*[R]*T*l_m)/((C_w*V_l)*(ΔP_atm-Δπ)) or Membrane Water Diffusivity = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/((Membrane Water Concentration*Partial Molar Volume)*(Membrane Pressure Drop-Osmotic Pressure)). Mass Water flux is defined as the rate of movement of water across a surface or through a medium, Temperature is a physical quantity that expresses quantitatively the attribute of hotness or coldness, Membrane Layer Thickness is the distance between the two outer surfaces of a membrane. It is typically measured in nanometers (nm), which are billionths of a meter, Membrane water concentration (MWC) is the concentration of water in a membrane. It is typically measured in moles per cubic meter (kg/m^3), The partial molar volume of a substance in a mixture is the change in volume of the mixture per mole of that substance added, at constant temperature and pressure, Membrane pressure drop is the difference in pressure between the inlet and outlet of a membrane system, housing (pressure vessel), or element & Osmotic pressure is the minimum pressure that must be applied to a solution to prevent the inward flow of its pure solvent across a semipermeable membrane.

How to calculate Membrane Water Diffusivity Based on Solution Diffusion Model?

Membrane water diffusivity based on solution diffusion model is the rate at which water molecules diffuse across a membrane driven by a concentration gradient is calculated using Membrane Water Diffusivity = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/((Membrane Water Concentration*Partial Molar Volume)*(Membrane Pressure Drop-Osmotic Pressure)). To calculate Membrane Water Diffusivity Based on Solution Diffusion Model, you need Mass Water Flux (J_wm), Temperature (T), Membrane Layer Thickness (l_m), Membrane Water Concentration (C_w), Partial Molar Volume (V_l), Membrane Pressure Drop (ΔP_atm) & Osmotic Pressure (Δπ). With our tool, you need to enter the respective value for Mass Water Flux, Temperature, Membrane Layer Thickness, Membrane Water Concentration, Partial Molar Volume, Membrane Pressure Drop & Osmotic Pressure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search