Membrane Thickness Based on Solution Diffusion Model Solution

STEP 0: Pre-Calculation Summary
Formula Used
Membrane Layer Thickness = (Partial Molar Volume*Membrane Water Diffusivity*Membrane Water Concentration*(Membrane Pressure Drop-Osmotic Pressure))/(Mass Water Flux*[R]*Temperature)
lm = (Vl*Dw*Cw*(ΔPatm-Δπ))/(Jwm*[R]*T)
This formula uses 1 Constants, 8 Variables
Constants Used
[R] - Universal gas constant Value Taken As 8.31446261815324
Variables Used
Membrane Layer Thickness - (Measured in Meter) - Membrane Layer Thickness is the distance between the two outer surfaces of a membrane. It is typically measured in nanometers (nm), which are billionths of a meter.
Partial Molar Volume - (Measured in Cubic Meter per Mole) - The partial molar volume of a substance in a mixture is the change in volume of the mixture per mole of that substance added, at constant temperature and pressure.
Membrane Water Diffusivity - (Measured in Square Meter per Second) - Membrane water diffusivity is the rate at which water molecules diffuse across a membrane. It is typically measured in square meters per second (m^2/s).
Membrane Water Concentration - (Measured in Kilogram per Cubic Meter) - Membrane water concentration (MWC) is the concentration of water in a membrane. It is typically measured in moles per cubic meter (kg/m^3).
Membrane Pressure Drop - (Measured in Pascal) - Membrane pressure drop is the difference in pressure between the inlet and outlet of a membrane system, housing (pressure vessel), or element.
Osmotic Pressure - (Measured in Pascal) - Osmotic pressure is the minimum pressure that must be applied to a solution to prevent the inward flow of its pure solvent across a semipermeable membrane.
Mass Water Flux - (Measured in Kilogram per Second per Square Meter) - Mass Water flux is defined as the rate of movement of water across a surface or through a medium.
Temperature - (Measured in Kelvin) - Temperature is a physical quantity that expresses quantitatively the attribute of hotness or coldness.
STEP 1: Convert Input(s) to Base Unit
Partial Molar Volume: 0.018 Cubic Meter per Kilomole --> 1.8E-05 Cubic Meter per Mole (Check conversion ​here)
Membrane Water Diffusivity: 1.762E-10 Square Meter per Second --> 1.762E-10 Square Meter per Second No Conversion Required
Membrane Water Concentration: 156 Kilogram per Cubic Meter --> 156 Kilogram per Cubic Meter No Conversion Required
Membrane Pressure Drop: 81.32 Atmosphere Technical --> 7974767.78 Pascal (Check conversion ​here)
Osmotic Pressure: 39.5 Atmosphere Technical --> 3873626.75 Pascal (Check conversion ​here)
Mass Water Flux: 6.3E-05 Kilogram per Second per Square Meter --> 6.3E-05 Kilogram per Second per Square Meter No Conversion Required
Temperature: 298 Kelvin --> 298 Kelvin No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
lm = (Vl*Dw*Cw*(ΔPatm-Δπ))/(Jwm*[R]*T) --> (1.8E-05*1.762E-10*156*(7974767.78-3873626.75))/(6.3E-05*[R]*298)
Evaluating ... ...
lm = 1.29992026139213E-05
STEP 3: Convert Result to Output's Unit
1.29992026139213E-05 Meter --> No Conversion Required
FINAL ANSWER
1.29992026139213E-05 1.3E-5 Meter <-- Membrane Layer Thickness
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Harsh Kadam
Shri Guru Gobind Singhji Institute of Engineering and Technology (SGGS), Nanded
Harsh Kadam has created this Calculator and 50+ more calculators!
Verifier Image
Verified by Vaibhav Mishra
DJ Sanghvi College of Engineering (DJSCE), Mumbai
Vaibhav Mishra has verified this Calculator and 200+ more calculators!

Membrane Characteristics Calculators

Membrane Pore Diameter
​ LaTeX ​ Go Pore Diameter = ((32*Liquid Viscosity*Flux through Membrane*Tortuosity*Membrane Thickness)/(Membrane Porosity*Applied Pressure Driving Force))^0.5
Membrane Thickness
​ LaTeX ​ Go Membrane Thickness = (Pore Diameter^2*Membrane Porosity*Applied Pressure Driving Force)/(32*Liquid Viscosity*Flux through Membrane*Tortuosity)
Membrane Porosity
​ LaTeX ​ Go Membrane Porosity = (32*Liquid Viscosity*Flux through Membrane*Tortuosity*Membrane Thickness)/(Pore Diameter^2*Applied Pressure Driving Force)
Pressure Driving Force in Membrane
​ LaTeX ​ Go Applied Pressure Driving Force = Membrane Flow Resistance of Unit Area*Liquid Viscosity*Flux through Membrane

Membrane Thickness Based on Solution Diffusion Model Formula

​LaTeX ​Go
Membrane Layer Thickness = (Partial Molar Volume*Membrane Water Diffusivity*Membrane Water Concentration*(Membrane Pressure Drop-Osmotic Pressure))/(Mass Water Flux*[R]*Temperature)
lm = (Vl*Dw*Cw*(ΔPatm-Δπ))/(Jwm*[R]*T)

By which factors is the Membrane thickness affected?

the membrane thickness can also be affected by the following:

The age of the organism: The membranes of older organisms are generally thicker than the membranes of younger organisms.
The presence of disease: Some diseases can cause the membranes to become thicker.
The use of certain medications: Some medications can also cause the membranes to become thicker.

How to Calculate Membrane Thickness Based on Solution Diffusion Model?

Membrane Thickness Based on Solution Diffusion Model calculator uses Membrane Layer Thickness = (Partial Molar Volume*Membrane Water Diffusivity*Membrane Water Concentration*(Membrane Pressure Drop-Osmotic Pressure))/(Mass Water Flux*[R]*Temperature) to calculate the Membrane Layer Thickness, Membrane thickness based on solution diffusion model is defined as the thickness of the membrane that is required to achieve a desired permeation rate and selectivity. Membrane Layer Thickness is denoted by lm symbol.

How to calculate Membrane Thickness Based on Solution Diffusion Model using this online calculator? To use this online calculator for Membrane Thickness Based on Solution Diffusion Model, enter Partial Molar Volume (Vl), Membrane Water Diffusivity (Dw), Membrane Water Concentration (Cw), Membrane Pressure Drop (ΔPatm), Osmotic Pressure (Δπ), Mass Water Flux (Jwm) & Temperature (T) and hit the calculate button. Here is how the Membrane Thickness Based on Solution Diffusion Model calculation can be explained with given input values -> 1.3E-5 = (1.8E-05*1.762E-10*156*(7974767.78-3873626.75))/(6.3E-05*[R]*298).

FAQ

What is Membrane Thickness Based on Solution Diffusion Model?
Membrane thickness based on solution diffusion model is defined as the thickness of the membrane that is required to achieve a desired permeation rate and selectivity and is represented as lm = (Vl*Dw*Cw*(ΔPatm-Δπ))/(Jwm*[R]*T) or Membrane Layer Thickness = (Partial Molar Volume*Membrane Water Diffusivity*Membrane Water Concentration*(Membrane Pressure Drop-Osmotic Pressure))/(Mass Water Flux*[R]*Temperature). The partial molar volume of a substance in a mixture is the change in volume of the mixture per mole of that substance added, at constant temperature and pressure, Membrane water diffusivity is the rate at which water molecules diffuse across a membrane. It is typically measured in square meters per second (m^2/s), Membrane water concentration (MWC) is the concentration of water in a membrane. It is typically measured in moles per cubic meter (kg/m^3), Membrane pressure drop is the difference in pressure between the inlet and outlet of a membrane system, housing (pressure vessel), or element, Osmotic pressure is the minimum pressure that must be applied to a solution to prevent the inward flow of its pure solvent across a semipermeable membrane, Mass Water flux is defined as the rate of movement of water across a surface or through a medium & Temperature is a physical quantity that expresses quantitatively the attribute of hotness or coldness.
How to calculate Membrane Thickness Based on Solution Diffusion Model?
Membrane thickness based on solution diffusion model is defined as the thickness of the membrane that is required to achieve a desired permeation rate and selectivity is calculated using Membrane Layer Thickness = (Partial Molar Volume*Membrane Water Diffusivity*Membrane Water Concentration*(Membrane Pressure Drop-Osmotic Pressure))/(Mass Water Flux*[R]*Temperature). To calculate Membrane Thickness Based on Solution Diffusion Model, you need Partial Molar Volume (Vl), Membrane Water Diffusivity (Dw), Membrane Water Concentration (Cw), Membrane Pressure Drop (ΔPatm), Osmotic Pressure (Δπ), Mass Water Flux (Jwm) & Temperature (T). With our tool, you need to enter the respective value for Partial Molar Volume, Membrane Water Diffusivity, Membrane Water Concentration, Membrane Pressure Drop, Osmotic Pressure, Mass Water Flux & Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!