Membrane Pressure Drop Based On Solution Diffusion Model Solution

STEP 0: Pre-Calculation Summary
Formula Used
Membrane Pressure Drop = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/(Membrane Water Diffusivity*Membrane Water Concentration*Partial Molar Volume)+Osmotic Pressure
ΔPatm = (Jwm*[R]*T*lm)/(Dw*Cw*Vl)+Δπ
This formula uses 1 Constants, 8 Variables
Constants Used
[R] - Universal gas constant Value Taken As 8.31446261815324
Variables Used
Membrane Pressure Drop - (Measured in Pascal) - Membrane pressure drop is the difference in pressure between the inlet and outlet of a membrane system, housing (pressure vessel), or element.
Mass Water Flux - (Measured in Kilogram per Second per Square Meter) - Mass Water flux is defined as the rate of movement of water across a surface or through a medium.
Temperature - (Measured in Kelvin) - Temperature is a physical quantity that expresses quantitatively the attribute of hotness or coldness.
Membrane Layer Thickness - (Measured in Meter) - Membrane Layer Thickness is the distance between the two outer surfaces of a membrane. It is typically measured in nanometers (nm), which are billionths of a meter.
Membrane Water Diffusivity - (Measured in Square Meter per Second) - Membrane water diffusivity is the rate at which water molecules diffuse across a membrane. It is typically measured in square meters per second (m^2/s).
Membrane Water Concentration - (Measured in Kilogram per Cubic Meter) - Membrane water concentration (MWC) is the concentration of water in a membrane. It is typically measured in moles per cubic meter (kg/m^3).
Partial Molar Volume - (Measured in Cubic Meter per Mole) - The partial molar volume of a substance in a mixture is the change in volume of the mixture per mole of that substance added, at constant temperature and pressure.
Osmotic Pressure - (Measured in Pascal) - Osmotic pressure is the minimum pressure that must be applied to a solution to prevent the inward flow of its pure solvent across a semipermeable membrane.
STEP 1: Convert Input(s) to Base Unit
Mass Water Flux: 6.3E-05 Kilogram per Second per Square Meter --> 6.3E-05 Kilogram per Second per Square Meter No Conversion Required
Temperature: 298 Kelvin --> 298 Kelvin No Conversion Required
Membrane Layer Thickness: 1.3E-05 Meter --> 1.3E-05 Meter No Conversion Required
Membrane Water Diffusivity: 1.762E-10 Square Meter per Second --> 1.762E-10 Square Meter per Second No Conversion Required
Membrane Water Concentration: 156 Kilogram per Cubic Meter --> 156 Kilogram per Cubic Meter No Conversion Required
Partial Molar Volume: 0.018 Cubic Meter per Kilomole --> 1.8E-05 Cubic Meter per Mole (Check conversion ​here)
Osmotic Pressure: 39.5 Atmosphere Technical --> 3873626.75 Pascal (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ΔPatm = (Jwm*[R]*T*lm)/(Dw*Cw*Vl)+Δπ --> (6.3E-05*[R]*298*1.3E-05)/(1.762E-10*156*1.8E-05)+3873626.75
Evaluating ... ...
ΔPatm = 7975019.34872012
STEP 3: Convert Result to Output's Unit
7975019.34872012 Pascal -->81.3225652870259 Atmosphere Technical (Check conversion ​here)
FINAL ANSWER
81.3225652870259 81.32257 Atmosphere Technical <-- Membrane Pressure Drop
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Harsh Kadam
Shri Guru Gobind Singhji Institute of Engineering and Technology (SGGS), Nanded
Harsh Kadam has created this Calculator and 50+ more calculators!
Verifier Image
Verified by Vaibhav Mishra
DJ Sanghvi College of Engineering (DJSCE), Mumbai
Vaibhav Mishra has verified this Calculator and 200+ more calculators!

Membrane Characteristics Calculators

Membrane Pore Diameter
​ LaTeX ​ Go Pore Diameter = ((32*Liquid Viscosity*Flux through Membrane*Tortuosity*Membrane Thickness)/(Membrane Porosity*Applied Pressure Driving Force))^0.5
Membrane Thickness
​ LaTeX ​ Go Membrane Thickness = (Pore Diameter^2*Membrane Porosity*Applied Pressure Driving Force)/(32*Liquid Viscosity*Flux through Membrane*Tortuosity)
Membrane Porosity
​ LaTeX ​ Go Membrane Porosity = (32*Liquid Viscosity*Flux through Membrane*Tortuosity*Membrane Thickness)/(Pore Diameter^2*Applied Pressure Driving Force)
Pressure Driving Force in Membrane
​ LaTeX ​ Go Applied Pressure Driving Force = Membrane Flow Resistance of Unit Area*Liquid Viscosity*Flux through Membrane

Membrane Pressure Drop Based On Solution Diffusion Model Formula

​LaTeX ​Go
Membrane Pressure Drop = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/(Membrane Water Diffusivity*Membrane Water Concentration*Partial Molar Volume)+Osmotic Pressure
ΔPatm = (Jwm*[R]*T*lm)/(Dw*Cw*Vl)+Δπ

How the Membrane Pressure Drop Can Be Maintained?

The Membrane Pressure Drop Can be Maintained by :
Use a membrane with a high porosity and low tortuosity.
Use a feed flow rate that is below the maximum allowable flow rate.
Maintain the operating temperature at a level that is optimal for the membrane material.
Clean the membrane regularly to remove fouling.

How to Calculate Membrane Pressure Drop Based On Solution Diffusion Model?

Membrane Pressure Drop Based On Solution Diffusion Model calculator uses Membrane Pressure Drop = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/(Membrane Water Diffusivity*Membrane Water Concentration*Partial Molar Volume)+Osmotic Pressure to calculate the Membrane Pressure Drop, Membrane Pressure Drop Based on Solution Diffusion model is defined as the difference in pressure between the two sides of a semi-permeable membrane due to the flow of fluid through the membrane. Membrane Pressure Drop is denoted by ΔPatm symbol.

How to calculate Membrane Pressure Drop Based On Solution Diffusion Model using this online calculator? To use this online calculator for Membrane Pressure Drop Based On Solution Diffusion Model, enter Mass Water Flux (Jwm), Temperature (T), Membrane Layer Thickness (lm), Membrane Water Diffusivity (Dw), Membrane Water Concentration (Cw), Partial Molar Volume (Vl) & Osmotic Pressure (Δπ) and hit the calculate button. Here is how the Membrane Pressure Drop Based On Solution Diffusion Model calculation can be explained with given input values -> 0.000829 = (6.3E-05*[R]*298*1.3E-05)/(1.762E-10*156*1.8E-05)+3873626.75.

FAQ

What is Membrane Pressure Drop Based On Solution Diffusion Model?
Membrane Pressure Drop Based on Solution Diffusion model is defined as the difference in pressure between the two sides of a semi-permeable membrane due to the flow of fluid through the membrane and is represented as ΔPatm = (Jwm*[R]*T*lm)/(Dw*Cw*Vl)+Δπ or Membrane Pressure Drop = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/(Membrane Water Diffusivity*Membrane Water Concentration*Partial Molar Volume)+Osmotic Pressure. Mass Water flux is defined as the rate of movement of water across a surface or through a medium, Temperature is a physical quantity that expresses quantitatively the attribute of hotness or coldness, Membrane Layer Thickness is the distance between the two outer surfaces of a membrane. It is typically measured in nanometers (nm), which are billionths of a meter, Membrane water diffusivity is the rate at which water molecules diffuse across a membrane. It is typically measured in square meters per second (m^2/s), Membrane water concentration (MWC) is the concentration of water in a membrane. It is typically measured in moles per cubic meter (kg/m^3), The partial molar volume of a substance in a mixture is the change in volume of the mixture per mole of that substance added, at constant temperature and pressure & Osmotic pressure is the minimum pressure that must be applied to a solution to prevent the inward flow of its pure solvent across a semipermeable membrane.
How to calculate Membrane Pressure Drop Based On Solution Diffusion Model?
Membrane Pressure Drop Based on Solution Diffusion model is defined as the difference in pressure between the two sides of a semi-permeable membrane due to the flow of fluid through the membrane is calculated using Membrane Pressure Drop = (Mass Water Flux*[R]*Temperature*Membrane Layer Thickness)/(Membrane Water Diffusivity*Membrane Water Concentration*Partial Molar Volume)+Osmotic Pressure. To calculate Membrane Pressure Drop Based On Solution Diffusion Model, you need Mass Water Flux (Jwm), Temperature (T), Membrane Layer Thickness (lm), Membrane Water Diffusivity (Dw), Membrane Water Concentration (Cw), Partial Molar Volume (Vl) & Osmotic Pressure (Δπ). With our tool, you need to enter the respective value for Mass Water Flux, Temperature, Membrane Layer Thickness, Membrane Water Diffusivity, Membrane Water Concentration, Partial Molar Volume & Osmotic Pressure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!