Measured Length given Correction to be Subtracted from Slope Distance Calculator

✖Correction to be Subtracted from Slope Distance is the adjustment made to the measured slope distance (the actual distance along the inclined plane) to obtain the horizontal distance.ⓘ Correction to be Subtracted from Slope Distance [C_h]			+10% -10%
✖Slope Angle is defined as the angle measured between a horizontal plane at a given point on the land surface.ⓘ Slope Angle [θ]			+10% -10%

✖Measured Length is the length measured from steel tape during observation.ⓘ Measured Length given Correction to be Subtracted from Slope Distance [s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Measurement of Distance with Tapes Formulas PDF PDF Image

Measured Length given Correction to be Subtracted from Slope Distance Solution

STEP 0: Pre-Calculation Summary

Formula Used

Measured Length = (Correction to be Subtracted from Slope Distance/(1-cos(Slope Angle)))
s = (C_h/(1-cos(θ)))
This formula uses 1 Functions, 3 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Measured Length - (Measured in Meter) - Measured Length is the length measured from steel tape during observation.
Correction to be Subtracted from Slope Distance - (Measured in Meter) - Correction to be Subtracted from Slope Distance is the adjustment made to the measured slope distance (the actual distance along the inclined plane) to obtain the horizontal distance.
Slope Angle - (Measured in Radian) - Slope Angle is defined as the angle measured between a horizontal plane at a given point on the land surface.

STEP 1: Convert Input(s) to Base Unit

Correction to be Subtracted from Slope Distance: 1.03 Meter --> 1.03 Meter No Conversion Required
Slope Angle: 25 Degree --> 0.4363323129985 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s = (C_h/(1-cos(θ))) --> (1.03/(1-cos(0.4363323129985)))

Evaluating ... ...

s = 10.9934429705838

STEP 3: Convert Result to Output's Unit

10.9934429705838 Meter --> No Conversion Required

FINAL ANSWER

10.9934429705838 ≈ 10.99344 Meter <-- Measured Length

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Surveying Formulas » Measurement of Distance with Tapes » Correction for Temperature and Measurements on Slope » Measured Length given Correction to be Subtracted from Slope Distance

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Correction for Temperature and Measurements on Slope Calculators

Measured Length given Temperature Correction

LaTeX Go Measured Length = (Length Correction due to Temperature/(0.0000065*(Final Temperature-Initial Temperature)))

Measured Length given Correction to be Subtracted from Slope Distance

LaTeX Go Measured Length = (Correction to be Subtracted from Slope Distance/(1-cos(Slope Angle)))

Correction to be Subtracted from Slope Distance

LaTeX Go Correction to be Subtracted from Slope Distance = (Measured Length*(1-cos(Slope Angle)))

Temperature Correction to Measured Length

LaTeX Go Length Correction due to Temperature = (0.000065*(Final Temperature-Initial Temperature))

Measured Length given Correction to be Subtracted from Slope Distance Formula

LaTeX Go

Measured Length = (Correction to be Subtracted from Slope Distance/(1-cos(Slope Angle)))
s = (C_h/(1-cos(θ)))

What is the Effect of Slope on Survey Measurements?

The effect of slope on survey measurements is that it can cause errors in distance and elevation measurements, especially if the slope is steep or uneven.

What is the Purpose of Correcting for Temperature in Survey Measurements?

The purpose of correcting for temperature in survey measurements is to compensate for the expansion or contraction of survey equipment due to temperature changes, which can affect the accuracy of measurements.

How to Calculate Measured Length given Correction to be Subtracted from Slope Distance?

Measured Length given Correction to be Subtracted from Slope Distance calculator uses Measured Length = (Correction to be Subtracted from Slope Distance/(1-cos(Slope Angle))) to calculate the Measured Length, The Measured Length given Correction to be Subtracted from Slope Distance formula is defined as true length which is free from error. Measured Length is denoted by s symbol.

How to calculate Measured Length given Correction to be Subtracted from Slope Distance using this online calculator? To use this online calculator for Measured Length given Correction to be Subtracted from Slope Distance, enter Correction to be Subtracted from Slope Distance (C_h) & Slope Angle (θ) and hit the calculate button. Here is how the Measured Length given Correction to be Subtracted from Slope Distance calculation can be explained with given input values -> 10.99344 = (1.03/(1-cos(0.4363323129985))).

FAQ

What is Measured Length given Correction to be Subtracted from Slope Distance?

The Measured Length given Correction to be Subtracted from Slope Distance formula is defined as true length which is free from error and is represented as s = (C_h/(1-cos(θ))) or Measured Length = (Correction to be Subtracted from Slope Distance/(1-cos(Slope Angle))). Correction to be Subtracted from Slope Distance is the adjustment made to the measured slope distance (the actual distance along the inclined plane) to obtain the horizontal distance & Slope Angle is defined as the angle measured between a horizontal plane at a given point on the land surface.

How to calculate Measured Length given Correction to be Subtracted from Slope Distance?

The Measured Length given Correction to be Subtracted from Slope Distance formula is defined as true length which is free from error is calculated using Measured Length = (Correction to be Subtracted from Slope Distance/(1-cos(Slope Angle))). To calculate Measured Length given Correction to be Subtracted from Slope Distance, you need Correction to be Subtracted from Slope Distance (C_h) & Slope Angle (θ). With our tool, you need to enter the respective value for Correction to be Subtracted from Slope Distance & Slope Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Measured Length?

In this formula, Measured Length uses Correction to be Subtracted from Slope Distance & Slope Angle. We can use 1 other way(s) to calculate the same, which is/are as follows -

Measured Length = (Length Correction due to Temperature/(0.0000065*(Final Temperature-Initial Temperature)))

Home

FREE PDFs

🔍 Search