Mean Coil Diameter given Resultant Stress in Spring Calculator

✖Shear Stress in Spring is the force tending to cause deformation of spring by slippage along a plane or planes parallel to the imposed stress.ⓘ Shear Stress in Spring [𝜏]			+10% -10%
✖Diameter of Spring Wire is the diameter of the wire of which a spring is made.ⓘ Diameter of Spring Wire [d]			+10% -10%
✖Wahl Factor of Spring is simply a measure of the degree to which external stress is amplified at the curvature of the spring coil.ⓘ Wahl Factor of Spring [K]			+10% -10%
✖Axial Spring Force is the force acting at the ends of a spring trying to compress or expand it in axial direction.ⓘ Axial Spring Force [P]			+10% -10%

✖The Mean Coil Diameter of Spring is defined as the average of the inner and the outer diameters of a spring.ⓘ Mean Coil Diameter given Resultant Stress in Spring [D]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Automobile Elements Formula PDF PDF Image

Mean Coil Diameter given Resultant Stress in Spring Solution

STEP 0: Pre-Calculation Summary

Formula Used

Mean Coil Diameter of Spring = Shear Stress in Spring*(pi*Diameter of Spring Wire^3)/(Wahl Factor of Spring*8*Axial Spring Force)
D = 𝜏*(pi*d^3)/(K*8*P)
This formula uses 1 Constants, 5 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Mean Coil Diameter of Spring - (Measured in Meter) - The Mean Coil Diameter of Spring is defined as the average of the inner and the outer diameters of a spring.
Shear Stress in Spring - (Measured in Pascal) - Shear Stress in Spring is the force tending to cause deformation of spring by slippage along a plane or planes parallel to the imposed stress.
Diameter of Spring Wire - (Measured in Meter) - Diameter of Spring Wire is the diameter of the wire of which a spring is made.
Wahl Factor of Spring - Wahl Factor of Spring is simply a measure of the degree to which external stress is amplified at the curvature of the spring coil.
Axial Spring Force - (Measured in Newton) - Axial Spring Force is the force acting at the ends of a spring trying to compress or expand it in axial direction.

STEP 1: Convert Input(s) to Base Unit

Shear Stress in Spring: 230 Newton per Square Millimeter --> 230000000 Pascal (Check conversion here)
Diameter of Spring Wire: 4 Millimeter --> 0.004 Meter (Check conversion here)
Wahl Factor of Spring: 1.162 --> No Conversion Required
Axial Spring Force: 138.2 Newton --> 138.2 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D = 𝜏*(pi*d^3)/(K*8*P) --> 230000000*(pi*0.004^3)/(1.162*8*138.2)

Evaluating ... ...

D = 0.0359959404452951

STEP 3: Convert Result to Output's Unit

0.0359959404452951 Meter -->35.9959404452951 Millimeter (Check conversion here)

FINAL ANSWER

35.9959404452951 ≈ 35.99594 Millimeter <-- Mean Coil Diameter of Spring

(Calculation completed in 00.008 seconds)

You are here -

Home » Physics » Design of Automobile Elements » Design of Springs » Mechanical » Stress and Deflections in Springs » Mean Coil Diameter given Resultant Stress in Spring

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Stress and Deflections in Springs Calculators

Diameter of Spring Wire given Resultant Stress in Spring

LaTeX Go Diameter of Spring Wire = ((Wahl Factor of Spring*8*Axial Spring Force*Mean Coil Diameter of Spring)/(pi*Shear Stress in Spring))^(1/3)

Mean Coil Diameter given Resultant Stress in Spring

LaTeX Go Mean Coil Diameter of Spring = Shear Stress in Spring*(pi*Diameter of Spring Wire^3)/(Wahl Factor of Spring*8*Axial Spring Force)

Force acting on Spring given Resultant Stress

LaTeX Go Axial Spring Force = Shear Stress in Spring*(pi*Diameter of Spring Wire^3)/(Wahl Factor of Spring*8*Mean Coil Diameter of Spring)

Resultant Stress in Spring

LaTeX Go Shear Stress in Spring = Wahl Factor of Spring*(8*Axial Spring Force*Mean Coil Diameter of Spring)/(pi*Diameter of Spring Wire^3)

Mean Coil Diameter given Resultant Stress in Spring Formula

LaTeX Go

Mean Coil Diameter of Spring = Shear Stress in Spring*(pi*Diameter of Spring Wire^3)/(Wahl Factor of Spring*8*Axial Spring Force)
D = 𝜏*(pi*d^3)/(K*8*P)

Define Stress Factor of the Spring?

The stiffness is defined as the load per unit deflection. In order to take into account the effect of direct shear and change in coil curvature a stress factor is defined, which is known as Wahl's factor.

How to Calculate Mean Coil Diameter given Resultant Stress in Spring?

Mean Coil Diameter given Resultant Stress in Spring calculator uses Mean Coil Diameter of Spring = Shear Stress in Spring*(pi*Diameter of Spring Wire^3)/(Wahl Factor of Spring*8*Axial Spring Force) to calculate the Mean Coil Diameter of Spring, Mean Coil Diameter given Resultant Stress in Spring formula is defined as a measure of the diameter of a coil spring under stress, providing a critical parameter in spring design and engineering applications where stress and deflections are crucial. Mean Coil Diameter of Spring is denoted by D symbol.

How to calculate Mean Coil Diameter given Resultant Stress in Spring using this online calculator? To use this online calculator for Mean Coil Diameter given Resultant Stress in Spring, enter Shear Stress in Spring (𝜏), Diameter of Spring Wire (d), Wahl Factor of Spring (K) & Axial Spring Force (P) and hit the calculate button. Here is how the Mean Coil Diameter given Resultant Stress in Spring calculation can be explained with given input values -> 35995.94 = 230000000*(pi*0.004^3)/(1.162*8*138.2).

FAQ

What is Mean Coil Diameter given Resultant Stress in Spring?

Mean Coil Diameter given Resultant Stress in Spring formula is defined as a measure of the diameter of a coil spring under stress, providing a critical parameter in spring design and engineering applications where stress and deflections are crucial and is represented as D = 𝜏*(pi*d^3)/(K*8*P) or Mean Coil Diameter of Spring = Shear Stress in Spring*(pi*Diameter of Spring Wire^3)/(Wahl Factor of Spring*8*Axial Spring Force). Shear Stress in Spring is the force tending to cause deformation of spring by slippage along a plane or planes parallel to the imposed stress, Diameter of Spring Wire is the diameter of the wire of which a spring is made, Wahl Factor of Spring is simply a measure of the degree to which external stress is amplified at the curvature of the spring coil & Axial Spring Force is the force acting at the ends of a spring trying to compress or expand it in axial direction.

How to calculate Mean Coil Diameter given Resultant Stress in Spring?

Mean Coil Diameter given Resultant Stress in Spring formula is defined as a measure of the diameter of a coil spring under stress, providing a critical parameter in spring design and engineering applications where stress and deflections are crucial is calculated using Mean Coil Diameter of Spring = Shear Stress in Spring*(pi*Diameter of Spring Wire^3)/(Wahl Factor of Spring*8*Axial Spring Force). To calculate Mean Coil Diameter given Resultant Stress in Spring, you need Shear Stress in Spring (𝜏), Diameter of Spring Wire (d), Wahl Factor of Spring (K) & Axial Spring Force (P). With our tool, you need to enter the respective value for Shear Stress in Spring, Diameter of Spring Wire, Wahl Factor of Spring & Axial Spring Force and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Mean Coil Diameter of Spring?

In this formula, Mean Coil Diameter of Spring uses Shear Stress in Spring, Diameter of Spring Wire, Wahl Factor of Spring & Axial Spring Force. We can use 3 other way(s) to calculate the same, which is/are as follows -

Mean Coil Diameter of Spring = 0.5*Diameter of Spring Wire/(Shear Stress Correction Factor of Spring-1)
Mean Coil Diameter of Spring = (Deflection of Spring*Modulus of Rigidity of Spring Wire*Diameter of Spring Wire^4/(8*Axial Spring Force*Active Coils in Spring))^(1/3)
Mean Coil Diameter of Spring = (Modulus of Rigidity of Spring Wire*Diameter of Spring Wire^4/(8*Stiffness of Spring*Active Coils in Spring))^(1/3)

Home

FREE PDFs

🔍 Search