Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS) Calculator

✖Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end.ⓘ Power Transmitted [P]			+10% -10%
✖Current Overhead AC is defined as the current flowing through the overhead ac supply wire.ⓘ Current Overhead AC [I]			+10% -10%
✖Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.ⓘ Phase Difference [Φ]			+10% -10%

✖Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.ⓘ Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS) [V_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Voltage Overhead AC = Power Transmitted/(sqrt(2)*Current Overhead AC*cos(Phase Difference))
V_m = P/(sqrt(2)*I*cos(Φ))
This formula uses 2 Functions, 4 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Maximum Voltage Overhead AC - (Measured in Volt) - Maximum Voltage Overhead AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end.
Current Overhead AC - (Measured in Ampere) - Current Overhead AC is defined as the current flowing through the overhead ac supply wire.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.

STEP 1: Convert Input(s) to Base Unit

Power Transmitted: 890 Watt --> 890 Watt No Conversion Required
Current Overhead AC: 6.9 Ampere --> 6.9 Ampere No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_m = P/(sqrt(2)*I*cos(Φ)) --> 890/(sqrt(2)*6.9*cos(0.5235987755982))

Evaluating ... ...

V_m = 105.316225655895

STEP 3: Convert Result to Output's Unit

105.316225655895 Volt --> No Conversion Required

FINAL ANSWER

105.316225655895 ≈ 105.3162 Volt <-- Maximum Voltage Overhead AC

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Overhead AC Supply » 1 2 Wire Mid Point Earthed System » Current and Voltage » Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Current and Voltage Calculators

Maximum Voltage using Area of X-section(Single-Phase Two-Wire Mid-Point Earthed OS)

LaTeX Go Maximum Voltage Overhead AC = sqrt((Length of Overhead AC Wire*Resistivity*(Power Transmitted^2))/(Area of Overhead AC Wire*Line Losses*cos(Phase Difference)^2))

RMS Voltage using Area of X-Section(Single-Phase Two-Wire Mid-Point Earthed OS)

LaTeX Go Root Mean Square Voltage = sqrt(2*Length of Overhead AC Wire*Resistivity*Power Transmitted^2)/(Area of Overhead AC Wire*Line Losses*cos(Phase Difference)^2)

Load Current(Single-Phase Two-Wire Mid-Point Earthed)

LaTeX Go Current Overhead AC = Power Transmitted/(sqrt(2)*Maximum Voltage Overhead AC*cos(Phase Difference))

Maximum Voltage(Single-Phase Two-Wire Mid-Point Earthed)

LaTeX Go Maximum Voltage Overhead AC = (2)*Voltage Overhead AC

Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS) Formula

LaTeX Go

Maximum Voltage Overhead AC = Power Transmitted/(sqrt(2)*Current Overhead AC*cos(Phase Difference))
V_m = P/(sqrt(2)*I*cos(Φ))

What is the value of maximum voltage and volume of conductor material in this system?

The volume of conductor material required in this system is 1/2cos²θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is 2v_m so that r.m.s. value of voltage between them is √2v_m.

How to Calculate Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS)?

Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS) calculator uses Maximum Voltage Overhead AC = Power Transmitted/(sqrt(2)*Current Overhead AC*cos(Phase Difference)) to calculate the Maximum Voltage Overhead AC, Maximum Voltage using Load Current (single-Phase two-Wire Mid-Point OS) formula is defined as the highest voltage rating for electrical devices and equipment that can be used with the voltage definition. Maximum Voltage Overhead AC is denoted by V_m symbol.

How to calculate Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS) using this online calculator? To use this online calculator for Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS), enter Power Transmitted (P), Current Overhead AC (I) & Phase Difference (Φ) and hit the calculate button. Here is how the Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS) calculation can be explained with given input values -> 105.3162 = 890/(sqrt(2)*6.9*cos(0.5235987755982)).

FAQ

What is Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS)?

Maximum Voltage using Load Current (single-Phase two-Wire Mid-Point OS) formula is defined as the highest voltage rating for electrical devices and equipment that can be used with the voltage definition and is represented as V_m = P/(sqrt(2)*I*cos(Φ)) or Maximum Voltage Overhead AC = Power Transmitted/(sqrt(2)*Current Overhead AC*cos(Phase Difference)). Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end, Current Overhead AC is defined as the current flowing through the overhead ac supply wire & Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.

How to calculate Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS)?

Maximum Voltage using Load Current (single-Phase two-Wire Mid-Point OS) formula is defined as the highest voltage rating for electrical devices and equipment that can be used with the voltage definition is calculated using Maximum Voltage Overhead AC = Power Transmitted/(sqrt(2)*Current Overhead AC*cos(Phase Difference)). To calculate Maximum Voltage using Load Current (Single-Phase Two-Wire Mid-Point OS), you need Power Transmitted (P), Current Overhead AC (I) & Phase Difference (Φ). With our tool, you need to enter the respective value for Power Transmitted, Current Overhead AC & Phase Difference and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Maximum Voltage Overhead AC?

In this formula, Maximum Voltage Overhead AC uses Power Transmitted, Current Overhead AC & Phase Difference. We can use 3 other way(s) to calculate the same, which is/are as follows -

Maximum Voltage Overhead AC = (2)*Voltage Overhead AC
Maximum Voltage Overhead AC = sqrt((Length of Overhead AC Wire*Resistivity*(Power Transmitted^2))/(Area of Overhead AC Wire*Line Losses*cos(Phase Difference)^2))
Maximum Voltage Overhead AC = Power Transmitted*sqrt(Resistivity*Length of Overhead AC Wire/(Area of Overhead AC Wire*Line Losses))/cos(Phase Difference)

Home

FREE PDFs

🔍 Search