Maximum undeformed chip thickness given average volume of each chip Calculator

✖Average volume of each chip is defined as the overall average of the volume of each chip formed during the grinding.ⓘ Average Volume of Each Chip [V₀]			+10% -10%
✖Maximum width of chip is defined as the theoretical widest part a chip could have after being removed from the workpiece by a single abrasive grain on the grinding wheel.ⓘ Maximum Width of Chip [w_gcMax]			+10% -10%
✖Average Length of a Chip is the typical size (length) of the fragments created when a single abrasive grain on the grinding wheel fractures and removes material from the workpiece surface.ⓘ Average Length of a Chip [l_c]			+10% -10%

✖Maximum Undeformed Chip Thickness is the thickest layer of material a single abrasive grain on the grinding wheel aims to remove before it breaks the material and forms a chip.ⓘ Maximum undeformed chip thickness given average volume of each chip [t_gcMax]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Maximum undeformed chip thickness given average volume of each chip Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Undeformed Chip Thickness = 6*Average Volume of Each Chip/(Maximum Width of Chip*Average Length of a Chip)
t_gcMax = 6*V₀/(w_gcMax*l_c)
This formula uses 4 Variables

Variables Used

Maximum Undeformed Chip Thickness - (Measured in Meter) - Maximum Undeformed Chip Thickness is the thickest layer of material a single abrasive grain on the grinding wheel aims to remove before it breaks the material and forms a chip.
Average Volume of Each Chip - (Measured in Cubic Meter) - Average volume of each chip is defined as the overall average of the volume of each chip formed during the grinding.
Maximum Width of Chip - (Measured in Meter) - Maximum width of chip is defined as the theoretical widest part a chip could have after being removed from the workpiece by a single abrasive grain on the grinding wheel.
Average Length of a Chip - (Measured in Meter) - Average Length of a Chip is the typical size (length) of the fragments created when a single abrasive grain on the grinding wheel fractures and removes material from the workpiece surface.

STEP 1: Convert Input(s) to Base Unit

Average Volume of Each Chip: 151.2 Cubic Millimeter --> 1.512E-07 Cubic Meter (Check conversion here)
Maximum Width of Chip: 7.5 Millimeter --> 0.0075 Meter (Check conversion here)
Average Length of a Chip: 20.16 Millimeter --> 0.02016 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_gcMax = 6*V₀/(w_gcMax*l_c) --> 6*1.512E-07/(0.0075*0.02016)

Evaluating ... ...

t_gcMax = 0.006

STEP 3: Convert Result to Output's Unit

0.006 Meter -->6 Millimeter (Check conversion here)

FINAL ANSWER

6 Millimeter <-- Maximum Undeformed Chip Thickness

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Material Removed » Grinding Chip » Maximum undeformed chip thickness given average volume of each chip

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Grinding Chip Calculators

Angle made by length of chip given Infeed

LaTeX Go Angle Made by The Length of The Chip = acos(1-(2*Infeed Provided by Grinding Wheel)/Diameter of Grinding Wheel Tool)

Infeed for given Angle made by length of chip

LaTeX Go Infeed Provided by Grinding Wheel = (1-cos(Angle Made by The Length of The Chip))*Diameter of Grinding Wheel Tool/2

Angle made by length of chip

LaTeX Go Angle Made by The Length of The Chip = asin(2*Average Length of a Chip/Diameter of Grinding Wheel Tool)

Average length of chip

LaTeX Go Average Length of a Chip = Diameter of Grinding Wheel Tool*sin(Angle Made by The Length of The Chip)/2

Maximum undeformed chip thickness given average volume of each chip Formula

LaTeX Go

Maximum Undeformed Chip Thickness = 6*Average Volume of Each Chip/(Maximum Width of Chip*Average Length of a Chip)
t_gcMax = 6*V₀/(w_gcMax*l_c)

Why is the chip always thicker than the depth of cut?

During cutting, the cutting edge of the tool is positioned a certain distance below the original work surface. This corresponds to the thickness of the chip prior to chip formation. As the chip is formed along the shear plane, its thickness increases to t_c.

How to Calculate Maximum undeformed chip thickness given average volume of each chip?

Maximum undeformed chip thickness given average volume of each chip calculator uses Maximum Undeformed Chip Thickness = 6*Average Volume of Each Chip/(Maximum Width of Chip*Average Length of a Chip) to calculate the Maximum Undeformed Chip Thickness, Maximum undeformed chip thickness given average volume of each chip is the thickest layer of material a single abrasive grain on the grinding wheel aims to remove before it breaks the material and actually forms a chip, when overall average volume of each chip is known. By controlling the maximum undeformed chip thickness(MUCT), it is possible to achieve ductile-mode grinding, which results in improved surface integrity and reduced surface roughness. Maximum Undeformed Chip Thickness is denoted by t_gcMax symbol.

How to calculate Maximum undeformed chip thickness given average volume of each chip using this online calculator? To use this online calculator for Maximum undeformed chip thickness given average volume of each chip, enter Average Volume of Each Chip (V₀), Maximum Width of Chip (w_gcMax) & Average Length of a Chip (l_c) and hit the calculate button. Here is how the Maximum undeformed chip thickness given average volume of each chip calculation can be explained with given input values -> 357.1429 = 6*1.512E-07/(0.0075*0.02016).

FAQ

What is Maximum undeformed chip thickness given average volume of each chip?

Maximum undeformed chip thickness given average volume of each chip is the thickest layer of material a single abrasive grain on the grinding wheel aims to remove before it breaks the material and actually forms a chip, when overall average volume of each chip is known. By controlling the maximum undeformed chip thickness(MUCT), it is possible to achieve ductile-mode grinding, which results in improved surface integrity and reduced surface roughness and is represented as t_gcMax = 6*V₀/(w_gcMax*l_c) or Maximum Undeformed Chip Thickness = 6*Average Volume of Each Chip/(Maximum Width of Chip*Average Length of a Chip). Average volume of each chip is defined as the overall average of the volume of each chip formed during the grinding, Maximum width of chip is defined as the theoretical widest part a chip could have after being removed from the workpiece by a single abrasive grain on the grinding wheel & Average Length of a Chip is the typical size (length) of the fragments created when a single abrasive grain on the grinding wheel fractures and removes material from the workpiece surface.

How to calculate Maximum undeformed chip thickness given average volume of each chip?

Maximum undeformed chip thickness given average volume of each chip is the thickest layer of material a single abrasive grain on the grinding wheel aims to remove before it breaks the material and actually forms a chip, when overall average volume of each chip is known. By controlling the maximum undeformed chip thickness(MUCT), it is possible to achieve ductile-mode grinding, which results in improved surface integrity and reduced surface roughness is calculated using Maximum Undeformed Chip Thickness = 6*Average Volume of Each Chip/(Maximum Width of Chip*Average Length of a Chip). To calculate Maximum undeformed chip thickness given average volume of each chip, you need Average Volume of Each Chip (V₀), Maximum Width of Chip (w_gcMax) & Average Length of a Chip (l_c). With our tool, you need to enter the respective value for Average Volume of Each Chip, Maximum Width of Chip & Average Length of a Chip and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Maximum Undeformed Chip Thickness?

In this formula, Maximum Undeformed Chip Thickness uses Average Volume of Each Chip, Maximum Width of Chip & Average Length of a Chip. We can use 1 other way(s) to calculate the same, which is/are as follows -

Maximum Undeformed Chip Thickness = Maximum Width of Chip/Grain Aspect Ratio in Grinding

Home

FREE PDFs

🔍 Search