Maximum Stress given Eccentric Load and Eccentricity Calculator

✖Eccentric Load on Column is the load that causes direct stress as well as bending stress.ⓘ Eccentric Load on Column [P]			+10% -10%
✖Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.ⓘ Eccentricity of Loading [e_load]			+10% -10%
✖Width of Column is describe that how wide the column is.ⓘ Width of Column [b]			+10% -10%
✖Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Column Cross Sectional Area [A_sectional]			+10% -10%

✖Maximum Stress on Column Section is the maximum stress that the column material withstands before fracture.ⓘ Maximum Stress given Eccentric Load and Eccentricity [σ_max]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Maximum Stress given Eccentric Load and Eccentricity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Stress on Column Section = (Eccentric Load on Column*(1+(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area)
σ_max = (P*(1+(6*e_load/b)))/(A_sectional)
This formula uses 5 Variables

Variables Used

Maximum Stress on Column Section - (Measured in Pascal) - Maximum Stress on Column Section is the maximum stress that the column material withstands before fracture.
Eccentric Load on Column - (Measured in Newton) - Eccentric Load on Column is the load that causes direct stress as well as bending stress.
Eccentricity of Loading - (Measured in Meter) - Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.
Width of Column - (Measured in Meter) - Width of Column is describe that how wide the column is.
Column Cross Sectional Area - (Measured in Square Meter) - Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

STEP 1: Convert Input(s) to Base Unit

Eccentric Load on Column: 7 Kilonewton --> 7000 Newton (Check conversion here)
Eccentricity of Loading: 25 Millimeter --> 0.025 Meter (Check conversion here)
Width of Column: 600 Millimeter --> 0.6 Meter (Check conversion here)
Column Cross Sectional Area: 1.4 Square Meter --> 1.4 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_max = (P*(1+(6*e_load/b)))/(A_sectional) --> (7000*(1+(6*0.025/0.6)))/(1.4)

Evaluating ... ...

σ_max = 6250

STEP 3: Convert Result to Output's Unit

6250 Pascal -->0.00625 Megapascal (Check conversion here)

FINAL ANSWER

0.00625 Megapascal <-- Maximum Stress on Column Section

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Direct And Bending Stress » Resultant Stress » Mechanical » Rectangular Section Is Subjected to Eccentric Load » Maximum Stress given Eccentric Load and Eccentricity

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Dipto Mandal

Indian Institute of Information Technology (IIIT), Guwahati

Dipto Mandal has verified this Calculator and 400+ more calculators!

< Rectangular Section Is Subjected to Eccentric Load Calculators

Minimum Stress using Eccentric Load and Eccentricity

LaTeX Go Minimum Stress Value = (Eccentric Load on Column*(1-(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area)

Eccentric Load using Minimum Stress

LaTeX Go Eccentric Load on Column = (Minimum Stress Value*Column Cross Sectional Area)/(1-(6*Eccentricity of Loading/Width of Column))

Eccentricity using Minimum Stress

LaTeX Go Eccentricity of Loading = (1-(Minimum Stress Value*Column Cross Sectional Area/Eccentric Load on Column))*(Width of Column/6)

Minimum Stress

LaTeX Go Minimum Stress Value = (Direct Stress-Bending Stress in Column)

Maximum Stress given Eccentric Load and Eccentricity Formula

LaTeX Go

Maximum Stress on Column Section = (Eccentric Load on Column*(1+(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area)
σ_max = (P*(1+(6*e_load/b)))/(A_sectional)

What type of Stress is Developed due to Bending?

In torsion of a circular shaft, the action was all shear; contiguous cross-sections sheared over one another in their rotation about the axis of the shaft. Here, the major stresses induced due to bending are normal stresses of tension and compression.

How to Calculate Maximum Stress given Eccentric Load and Eccentricity?

Maximum Stress given Eccentric Load and Eccentricity calculator uses Maximum Stress on Column Section = (Eccentric Load on Column*(1+(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area) to calculate the Maximum Stress on Column Section, The Maximum Stress given Eccentric Load and Eccentricity formula is defined as a measure of the maximum stress experienced by a material when subjected to an eccentric load, taking into account the load's eccentricity and the material's sectional area, providing a critical value for structural integrity assessment. Maximum Stress on Column Section is denoted by σ_max symbol.

How to calculate Maximum Stress given Eccentric Load and Eccentricity using this online calculator? To use this online calculator for Maximum Stress given Eccentric Load and Eccentricity, enter Eccentric Load on Column (P), Eccentricity of Loading (e_load), Width of Column (b) & Column Cross Sectional Area (A_sectional) and hit the calculate button. Here is how the Maximum Stress given Eccentric Load and Eccentricity calculation can be explained with given input values -> 6.3E-9 = (7000*(1+(6*0.025/0.6)))/(1.4).

FAQ

What is Maximum Stress given Eccentric Load and Eccentricity?

The Maximum Stress given Eccentric Load and Eccentricity formula is defined as a measure of the maximum stress experienced by a material when subjected to an eccentric load, taking into account the load's eccentricity and the material's sectional area, providing a critical value for structural integrity assessment and is represented as σ_max = (P*(1+(6*e_load/b)))/(A_sectional) or Maximum Stress on Column Section = (Eccentric Load on Column*(1+(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area). Eccentric Load on Column is the load that causes direct stress as well as bending stress, Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen, Width of Column is describe that how wide the column is & Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

How to calculate Maximum Stress given Eccentric Load and Eccentricity?

The Maximum Stress given Eccentric Load and Eccentricity formula is defined as a measure of the maximum stress experienced by a material when subjected to an eccentric load, taking into account the load's eccentricity and the material's sectional area, providing a critical value for structural integrity assessment is calculated using Maximum Stress on Column Section = (Eccentric Load on Column*(1+(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area). To calculate Maximum Stress given Eccentric Load and Eccentricity, you need Eccentric Load on Column (P), Eccentricity of Loading (e_load), Width of Column (b) & Column Cross Sectional Area (A_sectional). With our tool, you need to enter the respective value for Eccentric Load on Column, Eccentricity of Loading, Width of Column & Column Cross Sectional Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Maximum Stress on Column Section?

In this formula, Maximum Stress on Column Section uses Eccentric Load on Column, Eccentricity of Loading, Width of Column & Column Cross Sectional Area. We can use 2 other way(s) to calculate the same, which is/are as follows -

Maximum Stress on Column Section = (Direct Stress+Bending Stress in Column)
Maximum Stress on Column Section = (Eccentric Load on Column/Column Cross Sectional Area)+((Eccentric Load on Column*Eccentricity of Loading*Distance of Outer Fibre from Neutral Axis)/Moment of Inertia about y-y axis)

Home

FREE PDFs

🔍 Search