Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Calculator

✖The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use.ⓘ Load on Weld [P]			+10% -10%
✖The Leg of Weld is the distance from the joint root to the toe of the weld.ⓘ Leg of Weld [h_l]			+10% -10%
✖The Length of Weld is the linear distance of the welding segment joined by the welded joint.ⓘ Length of Weld [L]			+10% -10%

✖Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.ⓘ Maximum Shear Stress-induced in Plane that is Inclined at Angle theta [𝜏_max]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transverse Fillet Weld Formulas PDF PDF Image

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld)
𝜏_max = 1.21*P/(h_l*L)
This formula uses 4 Variables

Variables Used

Maximum Shear Stress in Transverse Fillet Weld - (Measured in Pascal) - Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.
Load on Weld - (Measured in Newton) - The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use.
Leg of Weld - (Measured in Meter) - The Leg of Weld is the distance from the joint root to the toe of the weld.
Length of Weld - (Measured in Meter) - The Length of Weld is the linear distance of the welding segment joined by the welded joint.

STEP 1: Convert Input(s) to Base Unit

Load on Weld: 268.7 Kilonewton --> 268700 Newton (Check conversion here)
Leg of Weld: 21.2 Millimeter --> 0.0212 Meter (Check conversion here)
Length of Weld: 195 Millimeter --> 0.195 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

𝜏_max = 1.21*P/(h_l*L) --> 1.21*268700/(0.0212*0.195)

Evaluating ... ...

𝜏_max = 78647073.0527334

STEP 3: Convert Result to Output's Unit

78647073.0527334 Pascal -->78.6470730527334 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

78.6470730527334 ≈ 78.64707 Newton per Square Millimeter <-- Maximum Shear Stress in Transverse Fillet Weld

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Welded Joints » Mechanical » Transverse Fillet Weld » Maximum Shear Stress-induced in Plane that is Inclined at Angle theta

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Transverse Fillet Weld Calculators

Thickness of Plate given Tensile Stress in Transverse Fillet Weld

LaTeX Go Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld)

Tensile Stress in Transverse Fillet Weld

LaTeX Go Tensile Stress in Transverse Fillet Weld = Load on Transverse Fillet Weld/(0.707*Leg of Weld*Length of Weld)

Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

LaTeX Go Load on Transverse Fillet Weld = Tensile Stress in Transverse Fillet Weld*0.707*Leg of Weld*Length of Weld

Permissible Tensile Strength for Double Transverse Fillet Joint

LaTeX Go Tensile Stress in Transverse Fillet Weld = Load on Weld/(1.414*Length of Weld*Length of Weld)

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Formula

LaTeX Go

Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld)
𝜏_max = 1.21*P/(h_l*L)

Define Shear Stress?

Shear stress, the force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress. The resultant shear is of great importance in nature, being intimately related to the downslope movement of earth materials and to earthquakes.

How to Calculate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta calculator uses Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld) to calculate the Maximum Shear Stress in Transverse Fillet Weld, The Maximum Shear Stress-induced in Plane that is Inclined at Angle theta formula is defined as force tending to cause deformation of material by slippage along plane or planes parallel to imposed stress. Maximum Shear Stress in Transverse Fillet Weld is denoted by 𝜏_max symbol.

How to calculate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta using this online calculator? To use this online calculator for Maximum Shear Stress-induced in Plane that is Inclined at Angle theta, enter Load on Weld (P), Leg of Weld (h_l) & Length of Weld (L) and hit the calculate button. Here is how the Maximum Shear Stress-induced in Plane that is Inclined at Angle theta calculation can be explained with given input values -> 7.9E-5 = 1.21*268700/(0.0212*0.195).

FAQ

What is Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

The Maximum Shear Stress-induced in Plane that is Inclined at Angle theta formula is defined as force tending to cause deformation of material by slippage along plane or planes parallel to imposed stress and is represented as 𝜏_max = 1.21*P/(h_l*L) or Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld). The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use, The Leg of Weld is the distance from the joint root to the toe of the weld & The Length of Weld is the linear distance of the welding segment joined by the welded joint.

How to calculate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

The Maximum Shear Stress-induced in Plane that is Inclined at Angle theta formula is defined as force tending to cause deformation of material by slippage along plane or planes parallel to imposed stress is calculated using Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld). To calculate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta, you need Load on Weld (P), Leg of Weld (h_l) & Length of Weld (L). With our tool, you need to enter the respective value for Load on Weld, Leg of Weld & Length of Weld and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Maximum Shear Stress in Transverse Fillet Weld?

In this formula, Maximum Shear Stress in Transverse Fillet Weld uses Load on Weld, Leg of Weld & Length of Weld. We can use 1 other way(s) to calculate the same, which is/are as follows -

Maximum Shear Stress in Transverse Fillet Weld = Load per Unit Length in Transverse Fillet Weld/(0.8284*Leg of Weld)

Home

FREE PDFs

🔍 Search