Maximum Power Dissipation in Class B Stage Calculator

✖Supply Voltage is also defined defined as the bias voltage applied to the op amp for Q2(transistor 2) pin. It is also defined as as voltage at collector.ⓘ Supply Voltage [V_cc]			+10% -10%
✖Load Resistance is defined as the cumulative resistance of a circuit as seen by the voltage, current or power source driving that circuit.ⓘ Load Resistance [R_L]			+10% -10%

✖Maximum Power Dissipation is defined as the highest calculated power dissipation value of an amplifier.ⓘ Maximum Power Dissipation in Class B Stage [P_Dmax]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Output Stages and Power Amplifiers Formulas PDF PDF Image

Maximum Power Dissipation in Class B Stage Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Power Dissipation = (2*Supply Voltage^2)/(pi^2*Load Resistance)
P_Dmax = (2*V_cc^2)/(pi^2*R_L)
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Maximum Power Dissipation - (Measured in Watt) - Maximum Power Dissipation is defined as the highest calculated power dissipation value of an amplifier.
Supply Voltage - (Measured in Volt) - Supply Voltage is also defined defined as the bias voltage applied to the op amp for Q2(transistor 2) pin. It is also defined as as voltage at collector.
Load Resistance - (Measured in Ohm) - Load Resistance is defined as the cumulative resistance of a circuit as seen by the voltage, current or power source driving that circuit.

STEP 1: Convert Input(s) to Base Unit

Supply Voltage: 7.52 Volt --> 7.52 Volt No Conversion Required
Load Resistance: 2.5 Kilohm --> 2500 Ohm (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_Dmax = (2*V_cc^2)/(pi^2*R_L) --> (2*7.52^2)/(pi^2*2500)

Evaluating ... ...

P_Dmax = 0.00458380277075813

STEP 3: Convert Result to Output's Unit

0.00458380277075813 Watt -->4.58380277075813 Milliwatt (Check conversion here)

FINAL ANSWER

4.58380277075813 ≈ 4.583803 Milliwatt <-- Maximum Power Dissipation

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Amplifiers » Output Stages and Power Amplifiers » Class B Output Stage » Maximum Power Dissipation in Class B Stage

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Class B Output Stage Calculators

Load Resistance of Class B Stage

LaTeX Go Load Resistance of Class B = (2*Peak Amplitude Voltage*Supply Voltage)/(pi*Supply Power)

Efficiency of Class B Output Stage

LaTeX Go Efficiency of Class B = pi/4*(Peak Amplitude Voltage/Supply Voltage)

Maximum Average Power from Class B Output Stage

LaTeX Go Maximum Power in Class B = 1/2*(Supply Voltage^2/Load Resistance)

Efficiency of Class A

LaTeX Go Efficiency of Class A = 1/2*(Output Voltage/Drain Voltage)

Maximum Power Dissipation in Class B Stage Formula

LaTeX Go

Maximum Power Dissipation = (2*Supply Voltage^2)/(pi^2*Load Resistance)
P_Dmax = (2*V_cc^2)/(pi^2*R_L)

What are the applications of Maximum Power Dissipation in Class B Stage ?

Applications of maximum power dissipation in Class B stage include Overcurrent protection,Thermal management,Reliability and Compliance.

How to Calculate Maximum Power Dissipation in Class B Stage?

Maximum Power Dissipation in Class B Stage calculator uses Maximum Power Dissipation = (2*Supply Voltage^2)/(pi^2*Load Resistance) to calculate the Maximum Power Dissipation, The maximum power dissipation in class B stage formula refers to the maximum amount of power that a device can dissipate without causing damage or failure. Maximum Power Dissipation is denoted by P_Dmax symbol.

How to calculate Maximum Power Dissipation in Class B Stage using this online calculator? To use this online calculator for Maximum Power Dissipation in Class B Stage, enter Supply Voltage (V_cc) & Load Resistance (R_L) and hit the calculate button. Here is how the Maximum Power Dissipation in Class B Stage calculation can be explained with given input values -> 4559.453 = (2*7.52^2)/(pi^2*2500).

FAQ

What is Maximum Power Dissipation in Class B Stage?

The maximum power dissipation in class B stage formula refers to the maximum amount of power that a device can dissipate without causing damage or failure and is represented as P_Dmax = (2*V_cc^2)/(pi^2*R_L) or Maximum Power Dissipation = (2*Supply Voltage^2)/(pi^2*Load Resistance). Supply Voltage is also defined defined as the bias voltage applied to the op amp for Q2(transistor 2) pin. It is also defined as as voltage at collector & Load Resistance is defined as the cumulative resistance of a circuit as seen by the voltage, current or power source driving that circuit.

How to calculate Maximum Power Dissipation in Class B Stage?

The maximum power dissipation in class B stage formula refers to the maximum amount of power that a device can dissipate without causing damage or failure is calculated using Maximum Power Dissipation = (2*Supply Voltage^2)/(pi^2*Load Resistance). To calculate Maximum Power Dissipation in Class B Stage, you need Supply Voltage (V_cc) & Load Resistance (R_L). With our tool, you need to enter the respective value for Supply Voltage & Load Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search