Maximum Discharge of Broad Crested Weir if Critical Depth is Constant Calculator

✖The Coefficient of Discharge is ratio of actual discharge to theoretical discharge.ⓘ Coefficient of Discharge [C_d]			+10% -10%
✖Length of Weir Crest is the measurement or extent of Weir Crest from end to end.ⓘ Length of Weir Crest [L_w]			+10% -10%
✖Total Head is the combination of weir crested and additional head.ⓘ Total Head [H]			+10% -10%

✖Max Discharge Over Broad Crested Weir is max discharge of the quantity of any fluid flow over unit time. The quantity may be either volume or mass.ⓘ Maximum Discharge of Broad Crested Weir if Critical Depth is Constant [Q_W(max)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Broad Crested Weir Formulas PDF PDF Image

Maximum Discharge of Broad Crested Weir if Critical Depth is Constant Solution

STEP 0: Pre-Calculation Summary

Formula Used

Max Discharge Over Broad Crested Weir = 1.70*Coefficient of Discharge*Length of Weir Crest*(Total Head)^(3/2)
Q_W(max) = 1.70*C_d*L_w*(H)^(3/2)
This formula uses 4 Variables

Variables Used

Max Discharge Over Broad Crested Weir - (Measured in Cubic Meter per Second) - Max Discharge Over Broad Crested Weir is max discharge of the quantity of any fluid flow over unit time. The quantity may be either volume or mass.
Coefficient of Discharge - The Coefficient of Discharge is ratio of actual discharge to theoretical discharge.
Length of Weir Crest - (Measured in Meter) - Length of Weir Crest is the measurement or extent of Weir Crest from end to end.
Total Head - (Measured in Meter) - Total Head is the combination of weir crested and additional head.

STEP 1: Convert Input(s) to Base Unit

Coefficient of Discharge: 0.66 --> No Conversion Required
Length of Weir Crest: 3 Meter --> 3 Meter No Conversion Required
Total Head: 5 Meter --> 5 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_W(max) = 1.70*C_d*L_w*(H)^(3/2) --> 1.70*0.66*3*(5)^(3/2)

Evaluating ... ...

Q_W(max) = 37.6330240613215

STEP 3: Convert Result to Output's Unit

37.6330240613215 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

37.6330240613215 ≈ 37.63302 Cubic Meter per Second <-- Max Discharge Over Broad Crested Weir

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow Over Notches and Weirs » Broad Crested Weir » Maximum Discharge of Broad Crested Weir if Critical Depth is Constant

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has verified this Calculator and 400+ more calculators!

< Broad Crested Weir Calculators

Discharge over Broad Crested Weir

LaTeX Go Discharge Over Broad Crested Weir = Length of Weir Crest*Critical Depth of Weir*sqrt((2*[g])*(Total Head-Critical Depth of Weir))

Velocity of Flow given Head

LaTeX Go Velocity of Fluid for Weir = sqrt((2*Acceleration due to Gravity)*(Total Head-Critical Depth of Weir))

Critical Depth due to Reduction in Area of Flow Section given Total Head

LaTeX Go Critical Depth of Weir = Total Head-(Velocity of Fluid for Weir^2/(2*Acceleration due to Gravity))

Total Head above Weir Crest

LaTeX Go Total Head = Critical Depth of Weir+(Velocity of Fluid for Weir^2/(2*Acceleration due to Gravity))

Maximum Discharge of Broad Crested Weir if Critical Depth is Constant Formula

LaTeX Go

Max Discharge Over Broad Crested Weir = 1.70*Coefficient of Discharge*Length of Weir Crest*(Total Head)^(3/2)
Q_W(max) = 1.70*C_d*L_w*(H)^(3/2)

What does Coefficient of Discharge mean?

Coefficient of discharge is stated as the ratio between the actual flow discharge and theoretical flow discharge.

What is a Broad Crested Weir?

Broad crested weirs are robust structures that are generally constructed from reinforced concrete and which usually span the full width of the channel. They are used to measure the discharge of rivers, and are much more suited for this purpose than the relatively flimsy sharp crested weirs. The broad crested weir is one which the water flow discharge in measured from large water bodies like big canals while the sharp crested weir will help in measuring the discharge of the water from the small rivers and canals and the weir is placed in the direction of the flow of water.

How to Calculate Maximum Discharge of Broad Crested Weir if Critical Depth is Constant?

Maximum Discharge of Broad Crested Weir if Critical Depth is Constant calculator uses Max Discharge Over Broad Crested Weir = 1.70*Coefficient of Discharge*Length of Weir Crest*(Total Head)^(3/2) to calculate the Max Discharge Over Broad Crested Weir, The Maximum Discharge of Broad Crested Weir if Critical Depth is Constant is defined as the water flowing over it reaches critical depth, which is the minimum water depth required for maximum flow rate. Max Discharge Over Broad Crested Weir is denoted by Q_W(max) symbol.

How to calculate Maximum Discharge of Broad Crested Weir if Critical Depth is Constant using this online calculator? To use this online calculator for Maximum Discharge of Broad Crested Weir if Critical Depth is Constant, enter Coefficient of Discharge (C_d), Length of Weir Crest (L_w) & Total Head (H) and hit the calculate button. Here is how the Maximum Discharge of Broad Crested Weir if Critical Depth is Constant calculation can be explained with given input values -> 37.63302 = 1.70*0.66*3*(5)^(3/2).

FAQ

What is Maximum Discharge of Broad Crested Weir if Critical Depth is Constant?

The Maximum Discharge of Broad Crested Weir if Critical Depth is Constant is defined as the water flowing over it reaches critical depth, which is the minimum water depth required for maximum flow rate and is represented as Q_W(max) = 1.70*C_d*L_w*(H)^(3/2) or Max Discharge Over Broad Crested Weir = 1.70*Coefficient of Discharge*Length of Weir Crest*(Total Head)^(3/2). The Coefficient of Discharge is ratio of actual discharge to theoretical discharge, Length of Weir Crest is the measurement or extent of Weir Crest from end to end & Total Head is the combination of weir crested and additional head.

How to calculate Maximum Discharge of Broad Crested Weir if Critical Depth is Constant?

The Maximum Discharge of Broad Crested Weir if Critical Depth is Constant is defined as the water flowing over it reaches critical depth, which is the minimum water depth required for maximum flow rate is calculated using Max Discharge Over Broad Crested Weir = 1.70*Coefficient of Discharge*Length of Weir Crest*(Total Head)^(3/2). To calculate Maximum Discharge of Broad Crested Weir if Critical Depth is Constant, you need Coefficient of Discharge (C_d), Length of Weir Crest (L_w) & Total Head (H). With our tool, you need to enter the respective value for Coefficient of Discharge, Length of Weir Crest & Total Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Max Discharge Over Broad Crested Weir?

In this formula, Max Discharge Over Broad Crested Weir uses Coefficient of Discharge, Length of Weir Crest & Total Head. We can use 1 other way(s) to calculate the same, which is/are as follows -

Max Discharge Over Broad Crested Weir = 1.70*Coefficient of Discharge*Length of Weir Crest*(Total Head)^(3/2)

Home

FREE PDFs

🔍 Search