Maximum Deflection for Columns with Initial Curvature Calculator

✖Crippling Load is the load over which a column prefers to deform laterally rather than compressing itself.ⓘ Crippling Load [P]			+10% -10%
✖Euler load is the compressive load at which a slender column will suddenly bend or buckle.ⓘ Euler Load [P_E]			+10% -10%
✖Maximum Initial Deflection is the degree to which a structural element is displaced under a load.ⓘ Maximum Initial Deflection [C]			+10% -10%

✖Deflection of Column is the displacement or bending of a column from its original, vertical position when subjected to an external load, particularly a compressive load.ⓘ Maximum Deflection for Columns with Initial Curvature [δ_c]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Maximum Deflection for Columns with Initial Curvature Solution

STEP 0: Pre-Calculation Summary

Formula Used

Deflection of Column = (1/(1-(Crippling Load/Euler Load)))*Maximum Initial Deflection
δ_c = (1/(1-(P/P_E)))*C
This formula uses 4 Variables

Variables Used

Deflection of Column - (Measured in Meter) - Deflection of Column is the displacement or bending of a column from its original, vertical position when subjected to an external load, particularly a compressive load.
Crippling Load - (Measured in Newton) - Crippling Load is the load over which a column prefers to deform laterally rather than compressing itself.
Euler Load - (Measured in Newton) - Euler load is the compressive load at which a slender column will suddenly bend or buckle.
Maximum Initial Deflection - (Measured in Meter) - Maximum Initial Deflection is the degree to which a structural element is displaced under a load.

STEP 1: Convert Input(s) to Base Unit

Crippling Load: 2571.429 Newton --> 2571.429 Newton No Conversion Required
Euler Load: 4000 Newton --> 4000 Newton No Conversion Required
Maximum Initial Deflection: 300 Millimeter --> 0.3 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

δ_c = (1/(1-(P/P_E)))*C --> (1/(1-(2571.429/4000)))*0.3

Evaluating ... ...

δ_c = 0.840000252000076

STEP 3: Convert Result to Output's Unit

0.840000252000076 Meter -->840.000252000076 Millimeter (Check conversion here)

FINAL ANSWER

840.000252000076 ≈ 840.0003 Millimeter <-- Deflection of Column

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Mechanical » Columns With Initial Curvature » Maximum Deflection for Columns with Initial Curvature

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Columns With Initial Curvature Calculators

Length of Column given Initial Deflection at Distance X from end A

LaTeX Go Length of Column = (pi*Distance of Deflection from end A)/(asin(Initial Deflection/Maximum Initial Deflection))

Value of Distance 'X' given Initial Deflection at Distance X from end A

LaTeX Go Distance of Deflection from end A = (asin(Initial Deflection/Maximum Initial Deflection))*Length of Column/pi

Modulus of Elasticity given Euler Load

LaTeX Go Modulus of Elasticity of Column = (Euler Load*(Length of Column^2))/(pi^2*Moment of Inertia)

Euler Load

LaTeX Go Euler Load = ((pi^2)*Modulus of Elasticity of Column*Moment of Inertia)/(Length of Column^2)

Maximum Deflection for Columns with Initial Curvature Formula

LaTeX Go

Deflection of Column = (1/(1-(Crippling Load/Euler Load)))*Maximum Initial Deflection
δ_c = (1/(1-(P/P_E)))*C

What is Maximum Deflection?

Maximum Deflection refers to the largest displacement or deformation experienced by a structural element (such as a beam or column) under an applied load. It occurs at the point along the length of the element where the bending or deformation is greatest.

How to Calculate Maximum Deflection for Columns with Initial Curvature?

Maximum Deflection for Columns with Initial Curvature calculator uses Deflection of Column = (1/(1-(Crippling Load/Euler Load)))*Maximum Initial Deflection to calculate the Deflection of Column, The Maximum Deflection for Columns with Initial Curvature formula is defined as a measure of the maximum displacement of a column from its original position due to an external load, considering the initial curvature of the column, which is essential in structural analysis and design. Deflection of Column is denoted by δ_c symbol.

How to calculate Maximum Deflection for Columns with Initial Curvature using this online calculator? To use this online calculator for Maximum Deflection for Columns with Initial Curvature, enter Crippling Load (P), Euler Load (P_E) & Maximum Initial Deflection (C) and hit the calculate button. Here is how the Maximum Deflection for Columns with Initial Curvature calculation can be explained with given input values -> 840000.3 = (1/(1-(2571.429/4000)))*0.3.

FAQ

What is Maximum Deflection for Columns with Initial Curvature?

The Maximum Deflection for Columns with Initial Curvature formula is defined as a measure of the maximum displacement of a column from its original position due to an external load, considering the initial curvature of the column, which is essential in structural analysis and design and is represented as δ_c = (1/(1-(P/P_E)))*C or Deflection of Column = (1/(1-(Crippling Load/Euler Load)))*Maximum Initial Deflection. Crippling Load is the load over which a column prefers to deform laterally rather than compressing itself, Euler load is the compressive load at which a slender column will suddenly bend or buckle & Maximum Initial Deflection is the degree to which a structural element is displaced under a load.

How to calculate Maximum Deflection for Columns with Initial Curvature?

The Maximum Deflection for Columns with Initial Curvature formula is defined as a measure of the maximum displacement of a column from its original position due to an external load, considering the initial curvature of the column, which is essential in structural analysis and design is calculated using Deflection of Column = (1/(1-(Crippling Load/Euler Load)))*Maximum Initial Deflection. To calculate Maximum Deflection for Columns with Initial Curvature, you need Crippling Load (P), Euler Load (P_E) & Maximum Initial Deflection (C). With our tool, you need to enter the respective value for Crippling Load, Euler Load & Maximum Initial Deflection and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Deflection of Column?

In this formula, Deflection of Column uses Crippling Load, Euler Load & Maximum Initial Deflection. We can use 1 other way(s) to calculate the same, which is/are as follows -

Deflection of Column = (1/(1-(Crippling Load/Euler Load)))*Maximum Initial Deflection*sin((pi*Distance of Deflection from end A)/Length of Column)

Home

FREE PDFs

🔍 Search