Maximum Chopping Frequency in Load Commutated Chopper Calculator

✖Chopper On Time refers to the time period for which chopper was in ON state.ⓘ Chopper On Time [T_on]

+10%

-10%

✖Maximum Frequency of sound in a given medium depends on the properties of that medium.ⓘ Maximum Chopping Frequency in Load Commutated Chopper [f_max]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Choppers Formulas PDF PDF Image

Maximum Chopping Frequency in Load Commutated Chopper Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Frequency = 1/Chopper On Time
f_max = 1/T_on
This formula uses 2 Variables

Variables Used

Maximum Frequency - (Measured in Hertz) - Maximum Frequency of sound in a given medium depends on the properties of that medium.
Chopper On Time - (Measured in Second) - Chopper On Time refers to the time period for which chopper was in ON state.

STEP 1: Convert Input(s) to Base Unit

Chopper On Time: 0.45 Second --> 0.45 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_max = 1/T_on --> 1/0.45

Evaluating ... ...

f_max = 2.22222222222222

STEP 3: Convert Result to Output's Unit

2.22222222222222 Hertz --> No Conversion Required

FINAL ANSWER

2.22222222222222 ≈ 2.222222 Hertz <-- Maximum Frequency

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power Electronics » Choppers » Commutated Chopper » Maximum Chopping Frequency in Load Commutated Chopper

Credits

Created by Pratik Kumar Singh

Vellore Institute of Technology (VIT), Vellore

Pratik Kumar Singh has created this Calculator and 10+ more calculators!

Verified by Aman Dhussawat

GURU TEGH BAHADUR INSTITUTE OF TECHNOLOGY (GTBIT), NEW DELHI

Aman Dhussawat has verified this Calculator and 100+ more calculators!

< Commutated Chopper Calculators

Average Value of Output Voltage using Chopping Period

LaTeX Go Average Output Voltage = Input Voltage*(Chopper On Time-Circuit Turn Off Time)/Chopping Period

Peak Diode Current of Voltage Commutated Chopper

LaTeX Go Peak Diode Current = Source Voltage*sqrt(Capacitance/Inductance)

Total Commutation Interval in Load Commutated Chopper

LaTeX Go Total Commutation Interval = (2*Capacitance*Source Voltage)/Output Current

Circuit Turn Off Time for Main SCR in Chopper

LaTeX Go Circuit Turn Off Time = 1/Resonant Frequency*(pi-2*Commutation Angle)

Maximum Chopping Frequency in Load Commutated Chopper Formula

LaTeX Go

Maximum Frequency = 1/Chopper On Time
f_max = 1/T_on

What is Maximum Chopping Frequency and why is it important in signal processing?

Maximum Chopping Frequency, also known as the nyquist frequency, is the highest rate at which a continuous signal can be accurately sampled or divided into discrete data points in signal processing. It is crucial because it determines the minimum sampling rate required to faithfully represent an analog signal in digital form, preventing aliasing and ensuring signal integrity. Sampling below this frequency can lead to distortion and loss of information, affecting the accuracy and fidelity of digital signal processing applications such as audio recording, image processing, and data acquisition systems. Properly understanding and adhering to the maximum chopping frequency is fundamental to reliable signal conversion and analysis.

How to Calculate Maximum Chopping Frequency in Load Commutated Chopper?

Maximum Chopping Frequency in Load Commutated Chopper calculator uses Maximum Frequency = 1/Chopper On Time to calculate the Maximum Frequency, The Maximum Chopping Frequency in Load Commutated Chopper refers to the highest rate at which a signal or waveform can be divided into discrete segments or pulses within a given time frame, often measured in hertz (Hz). It represents the limit of how frequently a continuous signal can be sampled or divided. Maximum Frequency is denoted by f_max symbol.

How to calculate Maximum Chopping Frequency in Load Commutated Chopper using this online calculator? To use this online calculator for Maximum Chopping Frequency in Load Commutated Chopper, enter Chopper On Time (T_on) and hit the calculate button. Here is how the Maximum Chopping Frequency in Load Commutated Chopper calculation can be explained with given input values -> 2.222222 = 1/0.45.

FAQ

What is Maximum Chopping Frequency in Load Commutated Chopper?

The Maximum Chopping Frequency in Load Commutated Chopper refers to the highest rate at which a signal or waveform can be divided into discrete segments or pulses within a given time frame, often measured in hertz (Hz). It represents the limit of how frequently a continuous signal can be sampled or divided and is represented as f_max = 1/T_on or Maximum Frequency = 1/Chopper On Time. Chopper On Time refers to the time period for which chopper was in ON state.

How to calculate Maximum Chopping Frequency in Load Commutated Chopper?

The Maximum Chopping Frequency in Load Commutated Chopper refers to the highest rate at which a signal or waveform can be divided into discrete segments or pulses within a given time frame, often measured in hertz (Hz). It represents the limit of how frequently a continuous signal can be sampled or divided is calculated using Maximum Frequency = 1/Chopper On Time. To calculate Maximum Chopping Frequency in Load Commutated Chopper, you need Chopper On Time (T_on). With our tool, you need to enter the respective value for Chopper On Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search