Maximum Chip Thickness obtained in Slab Milling using Depth of Cut Solution

STEP 0: Pre-Calculation Summary
Formula Used
Max Chip Thickness in Slab Milling = 2*Feed Speed in Milling*sqrt(Depth of Cut in Milling/Diameter of a Cutting Tool)/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling)
Cmax = 2*Vfm*sqrt(dcut/Dcut)/(Nt*vrot)
This formula uses 1 Functions, 6 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Max Chip Thickness in Slab Milling - (Measured in Meter) - Max Chip Thickness in Slab Milling is defined as the maximum thickness of the scraped chip from a slab in sliding milling produced during machining.
Feed Speed in Milling - (Measured in Meter per Second) - Feed Speed in Milling is the feed given against a workpiece per unit time.
Depth of Cut in Milling - (Measured in Meter) - Depth of Cut in Milling is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.
Diameter of a Cutting Tool - (Measured in Meter) - Diameter of a Cutting Tool in Milling is the outer diameter of the cutting part of the tool.
Number of Teeth on Cutting Tool - Number of Teeth on Cutting Tool, as the name says is the number of teeth on a Cutting Tool that actually participates in Machining.
Rotational Frequency in Milling - (Measured in Hertz) - Rotational Frequency in Milling is defined as the number of rotations per unit time or reciprocal of the time period of one complete rotation.
STEP 1: Convert Input(s) to Base Unit
Feed Speed in Milling: 0.89 Millimeter per Second --> 0.00089 Meter per Second (Check conversion ​here)
Depth of Cut in Milling: 4.75 Millimeter --> 0.00475 Meter (Check conversion ​here)
Diameter of a Cutting Tool: 54.67 Millimeter --> 0.05467 Meter (Check conversion ​here)
Number of Teeth on Cutting Tool: 16 --> No Conversion Required
Rotational Frequency in Milling: 11 Hertz --> 11 Hertz No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Cmax = 2*Vfm*sqrt(dcut/Dcut)/(Nt*vrot) --> 2*0.00089*sqrt(0.00475/0.05467)/(16*11)
Evaluating ... ...
Cmax = 2.98112098968452E-06
STEP 3: Convert Result to Output's Unit
2.98112098968452E-06 Meter -->0.00298112098968452 Millimeter (Check conversion ​here)
FINAL ANSWER
0.00298112098968452 0.002981 Millimeter <-- Max Chip Thickness in Slab Milling
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Kumar Siddhant
Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur
Kumar Siddhant has created this Calculator and 400+ more calculators!
Verifier Image
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

Slab and Slide Milling Calculators

Maximum Chip Thickness obtained in Slab Milling using Tool Engagement Angle
​ LaTeX ​ Go Max Chip Thickness in Slab Milling = Feed Speed in Milling*sin(Tool Engagement Angle in Milling)/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling)
Tool Engagement Angle in Slab Milling using Depth of Cut
​ LaTeX ​ Go Tool Engagement Angle in Milling = acos(1-(2*Depth of Cut in Milling/Diameter of a Cutting Tool))
Feed Speed of Workpiece in Slab Milling
​ LaTeX ​ Go Feed Speed in Milling = Feed Rate in Milling*Reciprocating Strokes Frequency
Feed in Slab Milling given Feed Speed
​ LaTeX ​ Go Feed Rate in Milling = Feed Speed in Milling/Reciprocating Strokes Frequency

Maximum Chip Thickness obtained in Slab Milling using Depth of Cut Formula

​LaTeX ​Go
Max Chip Thickness in Slab Milling = 2*Feed Speed in Milling*sqrt(Depth of Cut in Milling/Diameter of a Cutting Tool)/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling)
Cmax = 2*Vfm*sqrt(dcut/Dcut)/(Nt*vrot)

Thickness of Chip generated during Milling

The thickness of the chips on milling operation changes continuously and they have a complex shape that depends on many different factors. The Chip that is generated when the tool first contacts the surface is thin and then it grows to achieve the largest thickness at the end of the cutting.

How to Calculate Maximum Chip Thickness obtained in Slab Milling using Depth of Cut?

Maximum Chip Thickness obtained in Slab Milling using Depth of Cut calculator uses Max Chip Thickness in Slab Milling = 2*Feed Speed in Milling*sqrt(Depth of Cut in Milling/Diameter of a Cutting Tool)/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling) to calculate the Max Chip Thickness in Slab Milling, Maximum Chip Thickness obtained in Slab Milling using Depth of Cut is a method to determine the maximum thickness of scraped Chip generated when worked under a given Depth of Cut. Max Chip Thickness in Slab Milling is denoted by Cmax symbol.

How to calculate Maximum Chip Thickness obtained in Slab Milling using Depth of Cut using this online calculator? To use this online calculator for Maximum Chip Thickness obtained in Slab Milling using Depth of Cut, enter Feed Speed in Milling (Vfm), Depth of Cut in Milling (dcut), Diameter of a Cutting Tool (Dcut), Number of Teeth on Cutting Tool (Nt) & Rotational Frequency in Milling (vrot) and hit the calculate button. Here is how the Maximum Chip Thickness obtained in Slab Milling using Depth of Cut calculation can be explained with given input values -> 2.813642 = 2*0.00089*sqrt(0.00475/0.05467)/(16*11).

FAQ

What is Maximum Chip Thickness obtained in Slab Milling using Depth of Cut?
Maximum Chip Thickness obtained in Slab Milling using Depth of Cut is a method to determine the maximum thickness of scraped Chip generated when worked under a given Depth of Cut and is represented as Cmax = 2*Vfm*sqrt(dcut/Dcut)/(Nt*vrot) or Max Chip Thickness in Slab Milling = 2*Feed Speed in Milling*sqrt(Depth of Cut in Milling/Diameter of a Cutting Tool)/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling). Feed Speed in Milling is the feed given against a workpiece per unit time, Depth of Cut in Milling is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction, Diameter of a Cutting Tool in Milling is the outer diameter of the cutting part of the tool, Number of Teeth on Cutting Tool, as the name says is the number of teeth on a Cutting Tool that actually participates in Machining & Rotational Frequency in Milling is defined as the number of rotations per unit time or reciprocal of the time period of one complete rotation.
How to calculate Maximum Chip Thickness obtained in Slab Milling using Depth of Cut?
Maximum Chip Thickness obtained in Slab Milling using Depth of Cut is a method to determine the maximum thickness of scraped Chip generated when worked under a given Depth of Cut is calculated using Max Chip Thickness in Slab Milling = 2*Feed Speed in Milling*sqrt(Depth of Cut in Milling/Diameter of a Cutting Tool)/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling). To calculate Maximum Chip Thickness obtained in Slab Milling using Depth of Cut, you need Feed Speed in Milling (Vfm), Depth of Cut in Milling (dcut), Diameter of a Cutting Tool (Dcut), Number of Teeth on Cutting Tool (Nt) & Rotational Frequency in Milling (vrot). With our tool, you need to enter the respective value for Feed Speed in Milling, Depth of Cut in Milling, Diameter of a Cutting Tool, Number of Teeth on Cutting Tool & Rotational Frequency in Milling and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Max Chip Thickness in Slab Milling?
In this formula, Max Chip Thickness in Slab Milling uses Feed Speed in Milling, Depth of Cut in Milling, Diameter of a Cutting Tool, Number of Teeth on Cutting Tool & Rotational Frequency in Milling. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Max Chip Thickness in Slab Milling = Feed Speed in Milling*sin(Tool Engagement Angle in Milling)/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!