Maximum Allowable Mass Velocity using Bubble Cap Trays Calculator

✖Entrainment Factor refers to the ratio of entrained liquid to the vapor flow in a distillation column, particularly in the vapor-liquid disengagement area, such as a distillation tray.ⓘ Entrainment Factor [C]			+10% -10%
✖Vapor Density in Distillation is defined as the ratio of mass to the volume of vapor at particular temperature in a distillation Column.ⓘ Vapor Density in Distillation [ρ_V]			+10% -10%
✖Liquid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies.ⓘ Liquid Density [ρ_L]			+10% -10%

✖Maximum Allowable Mass Velocity is a measure of the mass of fluid passing through a unit cross-sectional area per unit time.ⓘ Maximum Allowable Mass Velocity using Bubble Cap Trays [W_max]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Process Equipment Design Formula PDF PDF Image

Maximum Allowable Mass Velocity using Bubble Cap Trays Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Allowable Mass Velocity = Entrainment Factor*(Vapor Density in Distillation*(Liquid Density-Vapor Density in Distillation)^(1/2))
W_max = C*(ρ_V*(ρ_L-ρ_V)^(1/2))
This formula uses 4 Variables

Variables Used

Maximum Allowable Mass Velocity - (Measured in Kilogram per Second per Square Meter) - Maximum Allowable Mass Velocity is a measure of the mass of fluid passing through a unit cross-sectional area per unit time.
Entrainment Factor - Entrainment Factor refers to the ratio of entrained liquid to the vapor flow in a distillation column, particularly in the vapor-liquid disengagement area, such as a distillation tray.
Vapor Density in Distillation - (Measured in Kilogram per Cubic Meter) - Vapor Density in Distillation is defined as the ratio of mass to the volume of vapor at particular temperature in a distillation Column.
Liquid Density - (Measured in Kilogram per Cubic Meter) - Liquid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies.

STEP 1: Convert Input(s) to Base Unit

Entrainment Factor: 0.845 --> No Conversion Required
Vapor Density in Distillation: 1.71 Kilogram per Cubic Meter --> 1.71 Kilogram per Cubic Meter No Conversion Required
Liquid Density: 995 Kilogram per Cubic Meter --> 995 Kilogram per Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_max = C*(ρ_V*(ρ_L-ρ_V)^(1/2)) --> 0.845*(1.71*(995-1.71)^(1/2))

Evaluating ... ...

W_max = 45.5397718958739

STEP 3: Convert Result to Output's Unit

45.5397718958739 Kilogram per Second per Square Meter --> No Conversion Required

FINAL ANSWER

45.5397718958739 ≈ 45.53977 Kilogram per Second per Square Meter <-- Maximum Allowable Mass Velocity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Column Design » Distillation Tower Design » Maximum Allowable Mass Velocity using Bubble Cap Trays

Credits

Created by Rishi Vadodaria

Malviya National Institute Of Technology (MNIT JAIPUR ), JAIPUR

Rishi Vadodaria has created this Calculator and 200+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< Distillation Tower Design Calculators

Column Diameter given Maximum Vapor Rate and Maximum Vapor Velocity

LaTeX Go Column Diameter = sqrt((4*Vapor Mass Flowrate)/(pi*Vapor Density in Distillation*Maximum Allowable Vapor Velocity))

Column Diameter Based on Vapor Flowrate and Mass Velocity of Vapor

LaTeX Go Column Diameter = ((4*Vapor Mass Flowrate)/(pi*Maximum Allowable Mass Velocity))^(1/2)

Active Area given Gas Volumetric Flow and Flow Velocity

LaTeX Go Active Area = Volumetric Gas Flow/(Fractional Downcomer Area*Flooding Velocity)

Clearance Area under Downcomer given Weir Length and Apron Height

LaTeX Go Clearance Area Under Downcomer = Apron Height*Weir Length

Maximum Allowable Mass Velocity using Bubble Cap Trays Formula

LaTeX Go

Maximum Allowable Mass Velocity = Entrainment Factor*(Vapor Density in Distillation*(Liquid Density-Vapor Density in Distillation)^(1/2))
W_max = C*(ρ_V*(ρ_L-ρ_V)^(1/2))

What is the Significance of Mass Velocity in Distillation Columns?

Mass velocity in distillation columns is a critical parameter that plays a significant role in the design, operation, and performance of the column. Mass velocity is a measure of the mass flow rate of the vapor phase per unit cross-sectional area of the column. It is expressed in units such as kg/(m²·s) or lb/(ft²·s).
Mass velocity influences the distribution of vapor and liquid phases across the cross-section of the distillation column. It affects the uniformity of flow and, consequently, the efficiency of the separation process.

How to Calculate Maximum Allowable Mass Velocity using Bubble Cap Trays?

Maximum Allowable Mass Velocity using Bubble Cap Trays calculator uses Maximum Allowable Mass Velocity = Entrainment Factor*(Vapor Density in Distillation*(Liquid Density-Vapor Density in Distillation)^(1/2)) to calculate the Maximum Allowable Mass Velocity, The Maximum Allowable Mass Velocity Using Bubble Cap Trays formula is defined as the upper limit at which the fluid can flow through a given conduit without causing undesirable effects, such as excessive pressure drop, erosion, or other operational issues. Maximum Allowable Mass Velocity is denoted by W_max symbol.

How to calculate Maximum Allowable Mass Velocity using Bubble Cap Trays using this online calculator? To use this online calculator for Maximum Allowable Mass Velocity using Bubble Cap Trays, enter Entrainment Factor (C), Vapor Density in Distillation (ρ_V) & Liquid Density (ρ_L) and hit the calculate button. Here is how the Maximum Allowable Mass Velocity using Bubble Cap Trays calculation can be explained with given input values -> 45.53977 = 0.845*(1.71*(995-1.71)^(1/2)).

FAQ

What is Maximum Allowable Mass Velocity using Bubble Cap Trays?

The Maximum Allowable Mass Velocity Using Bubble Cap Trays formula is defined as the upper limit at which the fluid can flow through a given conduit without causing undesirable effects, such as excessive pressure drop, erosion, or other operational issues and is represented as W_max = C*(ρ_V*(ρ_L-ρ_V)^(1/2)) or Maximum Allowable Mass Velocity = Entrainment Factor*(Vapor Density in Distillation*(Liquid Density-Vapor Density in Distillation)^(1/2)). Entrainment Factor refers to the ratio of entrained liquid to the vapor flow in a distillation column, particularly in the vapor-liquid disengagement area, such as a distillation tray, Vapor Density in Distillation is defined as the ratio of mass to the volume of vapor at particular temperature in a distillation Column & Liquid Density is defined as the ratio of mass of given fluid with respect to the volume that it occupies.

How to calculate Maximum Allowable Mass Velocity using Bubble Cap Trays?

The Maximum Allowable Mass Velocity Using Bubble Cap Trays formula is defined as the upper limit at which the fluid can flow through a given conduit without causing undesirable effects, such as excessive pressure drop, erosion, or other operational issues is calculated using Maximum Allowable Mass Velocity = Entrainment Factor*(Vapor Density in Distillation*(Liquid Density-Vapor Density in Distillation)^(1/2)). To calculate Maximum Allowable Mass Velocity using Bubble Cap Trays, you need Entrainment Factor (C), Vapor Density in Distillation (ρ_V) & Liquid Density (ρ_L). With our tool, you need to enter the respective value for Entrainment Factor, Vapor Density in Distillation & Liquid Density and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search