Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Eye of Knuckle Joint [b]			+10% -10%
✖Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Fork Eye of Knuckle Joint [a]			+10% -10%

✖Bending Moment in Knuckle Pin is the amount of bending moment acting onto the knuckle pin when the knuckle joint is subjected to axial loading.ⓘ Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork [M_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Eye Formulas PDF PDF Image

Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork Solution

STEP 0: Pre-Calculation Summary

Formula Used

Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3)
M_b = L/2*(b/4+a/3)
This formula uses 4 Variables

Variables Used

Bending Moment in Knuckle Pin - (Measured in Newton Meter) - Bending Moment in Knuckle Pin is the amount of bending moment acting onto the knuckle pin when the knuckle joint is subjected to axial loading.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 45000 Newton --> 45000 Newton No Conversion Required
Thickess of Eye of Knuckle Joint: 44.3 Millimeter --> 0.0443 Meter (Check conversion here)
Thickess of Fork Eye of Knuckle Joint: 26.6 Millimeter --> 0.0266 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

M_b = L/2*(b/4+a/3) --> 45000/2*(0.0443/4+0.0266/3)

Evaluating ... ...

M_b = 448.6875

STEP 3: Convert Result to Output's Unit

448.6875 Newton Meter -->448687.5 Newton Millimeter (Check conversion here)

FINAL ANSWER

448687.5 Newton Millimeter <-- Bending Moment in Knuckle Pin

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Eye » Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Eye Calculators

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

LaTeX Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

LaTeX Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

LaTeX Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork Formula

LaTeX Go

Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3)
M_b = L/2*(b/4+a/3)

Applications of knuckle joint

1. Tie rod joint of a roof truss.
2. Tension link in bridge structure.
3. Link of roller chain.
4. Tie rod joint of jib crane.
5. The knuckle joint is also used in tractor.

How to Calculate Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork?

Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork calculator uses Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3) to calculate the Bending Moment in Knuckle Pin, The Max Bending moment in Knuckle Pin given load, thickness of eye and fork is the maximum amount of bending moment acting onto the knuckle pin when the knuckle joint is subjected to axial loading. Bending Moment in Knuckle Pin is denoted by M_b symbol.

How to calculate Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork using this online calculator? To use this online calculator for Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork, enter Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Thickess of Fork Eye of Knuckle Joint (a) and hit the calculate button. Here is how the Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork calculation can be explained with given input values -> 5E+8 = 45000/2*(0.0443/4+0.0266/3).

FAQ

What is Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork?

The Max Bending moment in Knuckle Pin given load, thickness of eye and fork is the maximum amount of bending moment acting onto the knuckle pin when the knuckle joint is subjected to axial loading and is represented as M_b = L/2*(b/4+a/3) or Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius & Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.

How to calculate Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork?

The Max Bending moment in Knuckle Pin given load, thickness of eye and fork is the maximum amount of bending moment acting onto the knuckle pin when the knuckle joint is subjected to axial loading is calculated using Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3). To calculate Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork, you need Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b) & Thickess of Fork Eye of Knuckle Joint (a). With our tool, you need to enter the respective value for Load on Knuckle Joint, Thickess of Eye of Knuckle Joint & Thickess of Fork Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search