Mass Density when Reynold's Number is Unity Calculator

✖Dynamic Viscosity for Aquifer of a fluid is the measure of its resistance to flow when an external force is applied.ⓘ Dynamic Viscosity for Aquifer [μ_viscosity]			+10% -10%
✖Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer.ⓘ Flow Velocity for Unconfined Aquifer [V_f]			+10% -10%
✖Diameter for Unconfined Aquifer is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.ⓘ Diameter for Unconfined Aquifer [D]			+10% -10%

✖The Mass Density of a substance is its mass per unit volume.ⓘ Mass Density when Reynold's Number is Unity [ρ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unconfined Aquifer Formulas PDF PDF Image

Mass Density when Reynold's Number is Unity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Mass Density = Dynamic Viscosity for Aquifer/(Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer)
ρ = μ_viscosity/(V_f*D)
This formula uses 4 Variables

Variables Used

Mass Density - (Measured in Kilogram per Cubic Meter) - The Mass Density of a substance is its mass per unit volume.
Dynamic Viscosity for Aquifer - (Measured in Poise) - Dynamic Viscosity for Aquifer of a fluid is the measure of its resistance to flow when an external force is applied.
Flow Velocity for Unconfined Aquifer - (Measured in Meter per Second) - Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer.
Diameter for Unconfined Aquifer - (Measured in Meter) - Diameter for Unconfined Aquifer is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.

STEP 1: Convert Input(s) to Base Unit

Dynamic Viscosity for Aquifer: 0.19 Poise --> 0.19 Poise No Conversion Required
Flow Velocity for Unconfined Aquifer: 0.01 Meter per Second --> 0.01 Meter per Second No Conversion Required
Diameter for Unconfined Aquifer: 0.02 Meter --> 0.02 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ = μ_viscosity/(V_f*D) --> 0.19/(0.01*0.02)

Evaluating ... ...

ρ = 950

STEP 3: Convert Result to Output's Unit

950 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

950 Kilogram per Cubic Meter <-- Mass Density

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Well Hydraulics » Unconfined Aquifer » Radial Distance and Radius of well » Mass Density when Reynold's Number is Unity

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Radial Distance and Radius of well Calculators

Radial Distance of Well 2 based on Discharge of Two Wells under Consideration

LaTeX Go Radial Distance at Well 2 = Radial Distance at Observation Well 1*exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radius of Well based on Discharge in Unconfined Aquifer

LaTeX Go Radius of Well given Discharge = Radius of Influence/exp((pi*Coefficient of Permeability of Soil Particle*(Initial Aquifer Thickness^2-Depth of Water^2))/Discharge)

Radial Distance of Well 1 based on Discharge of Two Wells under Consideration

LaTeX Go Radial Distance 1 = Radial Distance at Observation Well 2/exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radius of Well based on Discharge in Unconfined Aquifer with Base 10

LaTeX Go Radius of Well given Discharge = Radius of Influence/10^((1.36*Coefficient of Permeability of Soil Particle*(Initial Aquifer Thickness^2-Depth of Water^2))/Discharge)

Mass Density when Reynold's Number is Unity Formula

LaTeX Go

Mass Density = Dynamic Viscosity for Aquifer/(Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer)
ρ = μ_viscosity/(V_f*D)

What is Mass Density?

The mass density (ρ) of a substance is the mass of one unit volume of the substance. In terms of SI base units, mass density is expressed in kilograms per cubic metre.

How to Calculate Mass Density when Reynold's Number is Unity?

Mass Density when Reynold's Number is Unity calculator uses Mass Density = Dynamic Viscosity for Aquifer/(Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer) to calculate the Mass Density, The Mass Density when Reynold's Number is Unity formula is defined as the calculation of the value of mass density by using Darcy's law when we have Reynold's number is equals to unity. Mass Density is denoted by ρ symbol.

How to calculate Mass Density when Reynold's Number is Unity using this online calculator? To use this online calculator for Mass Density when Reynold's Number is Unity, enter Dynamic Viscosity for Aquifer (μ_viscosity), Flow Velocity for Unconfined Aquifer (V_f) & Diameter for Unconfined Aquifer (D) and hit the calculate button. Here is how the Mass Density when Reynold's Number is Unity calculation can be explained with given input values -> 950 = 0.019/(0.01*0.02).

FAQ

What is Mass Density when Reynold's Number is Unity?

The Mass Density when Reynold's Number is Unity formula is defined as the calculation of the value of mass density by using Darcy's law when we have Reynold's number is equals to unity and is represented as ρ = μ_viscosity/(V_f*D) or Mass Density = Dynamic Viscosity for Aquifer/(Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer). Dynamic Viscosity for Aquifer of a fluid is the measure of its resistance to flow when an external force is applied, Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer & Diameter for Unconfined Aquifer is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.

How to calculate Mass Density when Reynold's Number is Unity?

The Mass Density when Reynold's Number is Unity formula is defined as the calculation of the value of mass density by using Darcy's law when we have Reynold's number is equals to unity is calculated using Mass Density = Dynamic Viscosity for Aquifer/(Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer). To calculate Mass Density when Reynold's Number is Unity, you need Dynamic Viscosity for Aquifer (μ_viscosity), Flow Velocity for Unconfined Aquifer (V_f) & Diameter for Unconfined Aquifer (D). With our tool, you need to enter the respective value for Dynamic Viscosity for Aquifer, Flow Velocity for Unconfined Aquifer & Diameter for Unconfined Aquifer and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search