Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force Calculator

✖Effective Tension when buoyant force acts in a direction opposite to the gravity force.ⓘ Effective Tension [T_e]			+10% -10%
✖Cross Section Area of Steel in Pipe is the extent of a surface or plane figure as measured in square units.ⓘ Cross Section Area of Steel in Pipe [A_s]			+10% -10%
✖Length of Pipe Hanging in Well is essential in calculating all other values required in drilling.ⓘ Length of Pipe Hanging in Well [L_Well]			+10% -10%
✖Coordinate measured Downward from Top depends on tension on a Vertical Drill String.ⓘ Coordinate measured Downward from Top [z]			+10% -10%
✖Mass Density of Steel varies based on the alloying constituents but usually ranges between 7,750 and 8,050 kg/m3.ⓘ Mass Density of Steel [ρ_s]			+10% -10%

✖Density of Drilling Mud considering a steel drilling pipe hanging in an oil well.ⓘ Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force [ρ_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Hydrostatics Formulas PDF PDF Image

Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density of Drilling Mud = -((Effective Tension/([g]*Cross Section Area of Steel in Pipe*(Length of Pipe Hanging in Well-Coordinate measured Downward from Top))-Mass Density of Steel))
ρ_m = -((T_e/([g]*A_s*(L_Well-z))-ρ_s))
This formula uses 1 Constants, 6 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Density of Drilling Mud - (Measured in Kilogram per Cubic Meter) - Density of Drilling Mud considering a steel drilling pipe hanging in an oil well.
Effective Tension - (Measured in Newton) - Effective Tension when buoyant force acts in a direction opposite to the gravity force.
Cross Section Area of Steel in Pipe - (Measured in Square Meter) - Cross Section Area of Steel in Pipe is the extent of a surface or plane figure as measured in square units.
Length of Pipe Hanging in Well - (Measured in Meter) - Length of Pipe Hanging in Well is essential in calculating all other values required in drilling.
Coordinate measured Downward from Top - Coordinate measured Downward from Top depends on tension on a Vertical Drill String.
Mass Density of Steel - (Measured in Kilogram per Cubic Meter) - Mass Density of Steel varies based on the alloying constituents but usually ranges between 7,750 and 8,050 kg/m3.

STEP 1: Convert Input(s) to Base Unit

Effective Tension: 402.22 Kilonewton --> 402220 Newton (Check conversion here)
Cross Section Area of Steel in Pipe: 0.65 Square Meter --> 0.65 Square Meter No Conversion Required
Length of Pipe Hanging in Well: 16 Meter --> 16 Meter No Conversion Required
Coordinate measured Downward from Top: 6 --> No Conversion Required
Mass Density of Steel: 7750 Kilogram per Cubic Meter --> 7750 Kilogram per Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_m = -((T_e/([g]*A_s*(L_Well-z))-ρ_s)) --> -((402220/([g]*0.65*(16-6))-7750))

Evaluating ... ...

ρ_m = 1439.99607409258

STEP 3: Convert Result to Output's Unit

1439.99607409258 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

1439.99607409258 ≈ 1439.996 Kilogram per Cubic Meter <-- Density of Drilling Mud

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Offshore Hydromechanics » Hydrostatics » Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Hydrostatics Calculators

Coordinate measured Downward from Top given Tension on Vertical Drill String

LaTeX Go Coordinate measured Downward from Top = -((Tension on Vertical Drill String/(Mass Density of Steel*[g]*Cross Section Area of Steel in Pipe))-Length of Pipe Hanging in Well)

Cross Section Area of Steel in Pipe given Tension on Vertical Drill String

LaTeX Go Cross Section Area of Steel in Pipe = Tension on Vertical Drill String/(Mass Density of Steel*[g]*(Length of Pipe Hanging in Well-Coordinate measured Downward from Top))

Mass Density of Steel for Tension on Vertical Drill String

LaTeX Go Mass Density of Steel = Tension on Vertical Drill String/([g]*Cross Section Area of Steel in Pipe*(Length of Pipe Hanging in Well-Coordinate measured Downward from Top))

Tension on Vertical Drill String

LaTeX Go Tension on Vertical Drill String = Mass Density of Steel*[g]*Cross Section Area of Steel in Pipe*(Length of Pipe Hanging in Well-Coordinate measured Downward from Top)

Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force Formula

LaTeX Go

What is Buoyancy?

Buoyancy is the force that causes objects to float. It is the force exerted on an object that is partly or wholly immersed in a fluid. Buoyancy is caused by the differences in pressure acting on opposite sides of an object immersed in a static fluid. It is also known as the buoyant force

How to Calculate Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force?

Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force calculator uses Density of Drilling Mud = -((Effective Tension/([g]*Cross Section Area of Steel in Pipe*(Length of Pipe Hanging in Well-Coordinate measured Downward from Top))-Mass Density of Steel)) to calculate the Density of Drilling Mud, The Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force explains if buoyant force caused by mud is treated as distributed force concluding, that there is distributed buoyant force acting on entire body equal to weight of drilling mud displaced by drill string. Density of Drilling Mud is denoted by ρ_m symbol.

How to calculate Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force using this online calculator? To use this online calculator for Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force, enter Effective Tension (T_e), Cross Section Area of Steel in Pipe (A_s), Length of Pipe Hanging in Well (L_Well), Coordinate measured Downward from Top (z) & Mass Density of Steel (ρ_s) and hit the calculate button. Here is how the Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force calculation can be explained with given input values -> 1439.996 = -((402220/([g]*0.65*(16-6))-7750)).

FAQ

What is Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force?

The Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force explains if buoyant force caused by mud is treated as distributed force concluding, that there is distributed buoyant force acting on entire body equal to weight of drilling mud displaced by drill string and is represented as ρ_m = -((T_e/([g]*A_s*(L_Well-z))-ρ_s)) or Density of Drilling Mud = -((Effective Tension/([g]*Cross Section Area of Steel in Pipe*(Length of Pipe Hanging in Well-Coordinate measured Downward from Top))-Mass Density of Steel)). Effective Tension when buoyant force acts in a direction opposite to the gravity force, Cross Section Area of Steel in Pipe is the extent of a surface or plane figure as measured in square units, Length of Pipe Hanging in Well is essential in calculating all other values required in drilling, Coordinate measured Downward from Top depends on tension on a Vertical Drill String & Mass Density of Steel varies based on the alloying constituents but usually ranges between 7,750 and 8,050 kg/m3.

How to calculate Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force?

The Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force explains if buoyant force caused by mud is treated as distributed force concluding, that there is distributed buoyant force acting on entire body equal to weight of drilling mud displaced by drill string is calculated using Density of Drilling Mud = -((Effective Tension/([g]*Cross Section Area of Steel in Pipe*(Length of Pipe Hanging in Well-Coordinate measured Downward from Top))-Mass Density of Steel)). To calculate Mass Density of Drilling Mud when Buoyant Force acts in Direction opposite to Gravity Force, you need Effective Tension (T_e), Cross Section Area of Steel in Pipe (A_s), Length of Pipe Hanging in Well (L_Well), Coordinate measured Downward from Top (z) & Mass Density of Steel (ρ_s). With our tool, you need to enter the respective value for Effective Tension, Cross Section Area of Steel in Pipe, Length of Pipe Hanging in Well, Coordinate measured Downward from Top & Mass Density of Steel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Density of Drilling Mud?

In this formula, Density of Drilling Mud uses Effective Tension, Cross Section Area of Steel in Pipe, Length of Pipe Hanging in Well, Coordinate measured Downward from Top & Mass Density of Steel. We can use 2 other way(s) to calculate the same, which is/are as follows -

Density of Drilling Mud = Vertical Force at Bottom end of Drill String/([g]*Cross Section Area of Steel in Pipe*Length of Pipe Hanging in Well)
Density of Drilling Mud = (Lower Section of Drill String Length*Mass Density of Steel)/Length of Pipe Hanging in Well

Home

FREE PDFs

🔍 Search