Margin given diameter of rivet Calculator

✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]

+10%

-10%

✖Margin of Rivet is defined as the distance between the edge of the plate to the centreline of rivets in the nearest row.ⓘ Margin given diameter of rivet [m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Margin given diameter of rivet Solution

STEP 0: Pre-Calculation Summary

Formula Used

Margin of Rivet = 1.5*Rivet Diameter
m = 1.5*D_rivet
This formula uses 2 Variables

Variables Used

Margin of Rivet - (Measured in Meter) - Margin of Rivet is defined as the distance between the edge of the plate to the centreline of rivets in the nearest row.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

STEP 1: Convert Input(s) to Base Unit

Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

m = 1.5*D_rivet --> 1.5*0.018

Evaluating ... ...

m = 0.027

STEP 3: Convert Result to Output's Unit

0.027 Meter -->27 Millimeter (Check conversion here)

FINAL ANSWER

27 Millimeter <-- Margin of Rivet

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Tearing of the Plate Between the Rivet Hole and Edge » Margin given diameter of rivet

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Tearing of the Plate Between the Rivet Hole and Edge Calculators

Margin given diameter of rivet

LaTeX Go Margin of Rivet = 1.5*Rivet Diameter

Diameter of rivet given margin

LaTeX Go Rivet Diameter = Margin of Rivet/1.5

Margin given diameter of rivet Formula

LaTeX Go

Margin of Rivet = 1.5*Rivet Diameter
m = 1.5*D_rivet

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Margin given diameter of rivet?

Margin given diameter of rivet calculator uses Margin of Rivet = 1.5*Rivet Diameter to calculate the Margin of Rivet, The Margin given diameter of rivet is defined as the distance between the center of rivet hole to the nearest edge of the plate. Margin of Rivet is denoted by m symbol.

How to calculate Margin given diameter of rivet using this online calculator? To use this online calculator for Margin given diameter of rivet, enter Rivet Diameter (D_rivet) and hit the calculate button. Here is how the Margin given diameter of rivet calculation can be explained with given input values -> 36000 = 1.5*0.018.

FAQ

What is Margin given diameter of rivet?

The Margin given diameter of rivet is defined as the distance between the center of rivet hole to the nearest edge of the plate and is represented as m = 1.5*D_rivet or Margin of Rivet = 1.5*Rivet Diameter. Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

How to calculate Margin given diameter of rivet?

The Margin given diameter of rivet is defined as the distance between the center of rivet hole to the nearest edge of the plate is calculated using Margin of Rivet = 1.5*Rivet Diameter. To calculate Margin given diameter of rivet, you need Rivet Diameter (D_rivet). With our tool, you need to enter the respective value for Rivet Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search