Magnetic Field Intensity Calculator

✖The Length of Wire is the variable for wire length in a magnetic field.ⓘ Length of Wire [l]			+10% -10%
✖Distance from Wire refers to the distance of the particle from the wire.ⓘ Distance from Wire [d_wire]			+10% -10%

✖Magnetic Field Strength is a measure of the intensity of a magnetic field in a given area of that field.ⓘ Magnetic Field Intensity [H]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Electrostatic Parameters Formulas PDF PDF Image

Magnetic Field Intensity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Magnetic Field Strength = Length of Wire/(2*pi*Distance from Wire)
H = l/(2*pi*d_wire)
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Magnetic Field Strength - (Measured in Ampere per Meter) - Magnetic Field Strength is a measure of the intensity of a magnetic field in a given area of that field.
Length of Wire - (Measured in Meter) - The Length of Wire is the variable for wire length in a magnetic field.
Distance from Wire - (Measured in Meter) - Distance from Wire refers to the distance of the particle from the wire.

STEP 1: Convert Input(s) to Base Unit

Length of Wire: 50 Meter --> 50 Meter No Conversion Required
Distance from Wire: 34 Meter --> 34 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H = l/(2*pi*d_wire) --> 50/(2*pi*34)

Evaluating ... ...

H = 0.234051386899846

STEP 3: Convert Result to Output's Unit

0.234051386899846 Ampere per Meter --> No Conversion Required

FINAL ANSWER

0.234051386899846 ≈ 0.234051 Ampere per Meter <-- Magnetic Field Strength

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electronics » EDC » Electrostatic Parameters » Magnetic Field Intensity

Credits

Created by Pinna Murali Krishna

Lovely professional university (LPU), Phagwara,Punjab

Pinna Murali Krishna has created this Calculator and 4 more calculators!

Verified by Yada Sai Pranay

Indian Institute of Information Technology Design and Manufacturing ((IIIT D&M Kancheepuram)), Chennai

Yada Sai Pranay has verified this Calculator and 5 more calculators!

< Electrostatic Parameters Calculators

Magnetic Deflection Sensitivity

LaTeX Go Magnetic Deflection Sensitivity = (Length of Deflecting Plates*Cathode Ray Tube Length)*sqrt(([Charge-e]/(2*[Mass-e]*Anode Voltage)))

Electrostatic Deflection Sensitivity

LaTeX Go Electrostatic Deflection Sensitivity = (Length of Deflecting Plates*Cathode Ray Tube Length)/(2*Distance between Deflecting Plates*Anode Voltage)

Radius of Electron on Circular Path

LaTeX Go Radius of Electron = ([Mass-e]*Electron Velocity)/(Magnetic Field Strength*[Charge-e])

Particle Acceleration

LaTeX Go Particle Acceleration = ([Charge-e]*Electric Field Intensity)/[Mass-e]

Magnetic Field Intensity Formula

LaTeX Go

Magnetic Field Strength = Length of Wire/(2*pi*Distance from Wire)
H = l/(2*pi*d_wire)

What is the difference between magnetic field intensity and magnetic flux density?

The major difference between the magnetic field and the magnetic flux is that the magnetic field is the region in which moving charges and poles experience a force. whereas, the magnetic flux is the strength of magnetic lines produced by a magnet.
There is difference between representation as B is used for representing the magnetic flux density while H is used for representing the magnetic field intensity.

How to Calculate Magnetic Field Intensity?

Magnetic Field Intensity calculator uses Magnetic Field Strength = Length of Wire/(2*pi*Distance from Wire) to calculate the Magnetic Field Strength, The Magnetic Field Intensity formula is calculated at any point in the magnetic field where the force experienced by the unit north pole. In simple terms, it is a measure of how strong or weak any magnetic field is. The SI unit of magnetic field intensity is Ampere/meter (A/m). Magnetic Field Strength is denoted by H symbol.

How to calculate Magnetic Field Intensity using this online calculator? To use this online calculator for Magnetic Field Intensity, enter Length of Wire (l) & Distance from Wire (d_wire) and hit the calculate button. Here is how the Magnetic Field Intensity calculation can be explained with given input values -> 0.723432 = 50/(2*pi*34).

FAQ

What is Magnetic Field Intensity?

The Magnetic Field Intensity formula is calculated at any point in the magnetic field where the force experienced by the unit north pole. In simple terms, it is a measure of how strong or weak any magnetic field is. The SI unit of magnetic field intensity is Ampere/meter (A/m) and is represented as H = l/(2*pi*d_wire) or Magnetic Field Strength = Length of Wire/(2*pi*Distance from Wire). The Length of Wire is the variable for wire length in a magnetic field & Distance from Wire refers to the distance of the particle from the wire.

How to calculate Magnetic Field Intensity?

The Magnetic Field Intensity formula is calculated at any point in the magnetic field where the force experienced by the unit north pole. In simple terms, it is a measure of how strong or weak any magnetic field is. The SI unit of magnetic field intensity is Ampere/meter (A/m) is calculated using Magnetic Field Strength = Length of Wire/(2*pi*Distance from Wire). To calculate Magnetic Field Intensity, you need Length of Wire (l) & Distance from Wire (d_wire). With our tool, you need to enter the respective value for Length of Wire & Distance from Wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search