Machining Time for Shaping Operation Calculator

✖Width of Workpiece is the measurement or extent of workpiece measured side to side.ⓘ Width of Workpiece [b_w]			+10% -10%
✖Feed Rate in Milling is defined as the tool's distance travelled during one spindle revolution.ⓘ Feed Rate in Milling [f_r]			+10% -10%
✖Reciprocating Strokes Frequency is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.ⓘ Reciprocating Strokes Frequency [n_rs]			+10% -10%

✖Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.ⓘ Machining Time for Shaping Operation [t_m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Milling Operation Formulas PDF PDF Image

Machining Time for Shaping Operation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Machining Time = Width of Workpiece/(Feed Rate in Milling*Reciprocating Strokes Frequency)
t_m = b_w/(f_r*n_rs)
This formula uses 4 Variables

Variables Used

Machining Time - (Measured in Second) - Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.
Width of Workpiece - (Measured in Meter) - Width of Workpiece is the measurement or extent of workpiece measured side to side.
Feed Rate in Milling - (Measured in Meter Per Revolution) - Feed Rate in Milling is defined as the tool's distance travelled during one spindle revolution.
Reciprocating Strokes Frequency - (Measured in Hertz) - Reciprocating Strokes Frequency is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.

STEP 1: Convert Input(s) to Base Unit

Width of Workpiece: 444 Millimeter --> 0.444 Meter (Check conversion here)
Feed Rate in Milling: 0.7 Millimeter Per Revolution --> 0.0007 Meter Per Revolution (Check conversion here)
Reciprocating Strokes Frequency: 1.3 Hertz --> 1.3 Hertz No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

t_m = b_w/(f_r*n_rs) --> 0.444/(0.0007*1.3)

Evaluating ... ...

t_m = 487.912087912088

STEP 3: Convert Result to Output's Unit

487.912087912088 Second --> No Conversion Required

FINAL ANSWER

487.912087912088 ≈ 487.9121 Second <-- Machining Time

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Milling Operation » Face and Vertical Milling » Machining Time for Shaping Operation

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Face and Vertical Milling Calculators

Maximum Chip Thickness in Vertical Milling

LaTeX Go Max Chip Thickness in Vertical Milling = Feed Speed in Milling/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling)

Machining Time for Milling Operation

LaTeX Go Machining Time = (Length of Workpiece+Length of Approach in Vertical Milling)/Feed Speed in Milling

Machining Time for Shaping Operation

LaTeX Go Machining Time = Width of Workpiece/(Feed Rate in Milling*Reciprocating Strokes Frequency)

Minimum Length of Approach required in Face Milling

LaTeX Go Length of Approach in Vertical Milling = Diameter of a Cutting Tool/2

Machining Time for Shaping Operation Formula

LaTeX Go

Machining Time = Width of Workpiece/(Feed Rate in Milling*Reciprocating Strokes Frequency)
t_m = b_w/(f_r*n_rs)

Shaping Operation

Shaping is defined as the process of removing metal from a surface in a horizontal, vertical, and inclined position to produce a flat or plane surface, slots, and grooves by means of a relative reciprocating motion between the tool and workpiece.

How to Calculate Machining Time for Shaping Operation?

Machining Time for Shaping Operation calculator uses Machining Time = Width of Workpiece/(Feed Rate in Milling*Reciprocating Strokes Frequency) to calculate the Machining Time, The Machining Time for Shaping Operation is the total time taken by the Shaper Machine to reduce the height of the Workpiece or Job by a given limit. Machining Time is denoted by t_m symbol.

How to calculate Machining Time for Shaping Operation using this online calculator? To use this online calculator for Machining Time for Shaping Operation, enter Width of Workpiece (b_w), Feed Rate in Milling (f_r) & Reciprocating Strokes Frequency (n_rs) and hit the calculate button. Here is how the Machining Time for Shaping Operation calculation can be explained with given input values -> 487.9121 = 0.444/(0.0007*1.3).

FAQ

What is Machining Time for Shaping Operation?

The Machining Time for Shaping Operation is the total time taken by the Shaper Machine to reduce the height of the Workpiece or Job by a given limit and is represented as t_m = b_w/(f_r*n_rs) or Machining Time = Width of Workpiece/(Feed Rate in Milling*Reciprocating Strokes Frequency). Width of Workpiece is the measurement or extent of workpiece measured side to side, Feed Rate in Milling is defined as the tool's distance travelled during one spindle revolution & Reciprocating Strokes Frequency is defined as the number of pair of Cutting and Return Strokes made by the tool in unit time.

How to calculate Machining Time for Shaping Operation?

The Machining Time for Shaping Operation is the total time taken by the Shaper Machine to reduce the height of the Workpiece or Job by a given limit is calculated using Machining Time = Width of Workpiece/(Feed Rate in Milling*Reciprocating Strokes Frequency). To calculate Machining Time for Shaping Operation, you need Width of Workpiece (b_w), Feed Rate in Milling (f_r) & Reciprocating Strokes Frequency (n_rs). With our tool, you need to enter the respective value for Width of Workpiece, Feed Rate in Milling & Reciprocating Strokes Frequency and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Machining Time?

In this formula, Machining Time uses Width of Workpiece, Feed Rate in Milling & Reciprocating Strokes Frequency. We can use 1 other way(s) to calculate the same, which is/are as follows -

Machining Time = (Length of Workpiece+Length of Approach in Vertical Milling)/Feed Speed in Milling

Home

FREE PDFs

🔍 Search