Loss of head due to sudden enlargement at any particular section of pipe Calculator

✖Velocity of fluid at section 1 is the flow velocity of the liquid flowing in a pipe at a particular section considered as section 1.ⓘ Velocity of Fluid at Section 1 [V₁']			+10% -10%
✖Velocity of fluid at section 2 is the flow velocity of the liquid flowing in a pipe at a particular section considered as section 2.ⓘ Velocity of Fluid at Section 2 [V₂']			+10% -10%

✖The Loss of Head Sudden Enlargement is the energy loss caused due to the sudden enlargement in flow through pipes.ⓘ Loss of head due to sudden enlargement at any particular section of pipe [h_e]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Closed Channel Formula PDF PDF Image

Loss of head due to sudden enlargement at any particular section of pipe Solution

STEP 0: Pre-Calculation Summary

Formula Used

Loss of Head Sudden Enlargement = ((Velocity of Fluid at Section 1-Velocity of Fluid at Section 2)^2)/(2*[g])
h_e = ((V₁'-V₂')^2)/(2*[g])
This formula uses 1 Constants, 3 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Loss of Head Sudden Enlargement - (Measured in Meter) - The Loss of Head Sudden Enlargement is the energy loss caused due to the sudden enlargement in flow through pipes.
Velocity of Fluid at Section 1 - (Measured in Meter per Second) - Velocity of fluid at section 1 is the flow velocity of the liquid flowing in a pipe at a particular section considered as section 1.
Velocity of Fluid at Section 2 - (Measured in Meter per Second) - Velocity of fluid at section 2 is the flow velocity of the liquid flowing in a pipe at a particular section considered as section 2.

STEP 1: Convert Input(s) to Base Unit

Velocity of Fluid at Section 1: 4.18 Meter per Second --> 4.18 Meter per Second No Conversion Required
Velocity of Fluid at Section 2: 2.89 Meter per Second --> 2.89 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_e = ((V₁'-V₂')^2)/(2*[g]) --> ((4.18-2.89)^2)/(2*[g])

Evaluating ... ...

h_e = 0.0848454875008285

STEP 3: Convert Result to Output's Unit

0.0848454875008285 Meter --> No Conversion Required

FINAL ANSWER

0.0848454875008285 ≈ 0.084845 Meter <-- Loss of Head Sudden Enlargement

(Calculation completed in 00.007 seconds)

You are here -

Home » Physics » Fluid Mechanics » Properties of Surfaces and Solids » Closed Channel » Mechanical » Pressure and Flow Head » Loss of head due to sudden enlargement at any particular section of pipe

Credits

Created by Maiarutselvan V

PSG College of Technology (PSGCT), Coimbatore

Maiarutselvan V has created this Calculator and 300+ more calculators!

Verified by Vinay Mishra

Indian Institute for Aeronautical Engineering and Information Technology (IIAEIT), Pune

Vinay Mishra has verified this Calculator and 100+ more calculators!

< Pressure and Flow Head Calculators

Difference in liquid level in three compound pipes with same friction coefficient

LaTeX Go Difference in Liquid Level = (4*Coefficient of Friction of Pipe/(2*[g]))*((Length of Pipe*Velocity at Point 1^2/Diameter of Pipe)+(Length of Pipe*Velocity at Point 2^2/Diameter of Pipe)+(Length of Pipe*Velocity at Point 3^2/Diameter of Pipe))

Total head at inlet of pipe for head available at base of nozzle

LaTeX Go Total Head at Inlet of Pipe = Head at Base of Nozzle+(4*Coefficient of Friction of Pipe*Length of Pipe*(Flow Velocity through Pipe^2)/(Diameter of Pipe*2*[g]))

Head available at Base of Nozzle

LaTeX Go Head at Base of Nozzle = Total Head at Inlet of Pipe-(4*Coefficient of Friction of Pipe*Length of Pipe*(Flow Velocity through Pipe^2)/(Diameter of Pipe*2*[g]))

Total head available at inlet of pipe for efficiency of power transmission

LaTeX Go Total Head at Inlet of Pipe = Head Loss Due to Friction in Pipe/(1-Efficiency for Pipe)

Loss of head due to sudden enlargement at any particular section of pipe Formula

LaTeX Go

Loss of Head Sudden Enlargement = ((Velocity of Fluid at Section 1-Velocity of Fluid at Section 2)^2)/(2*[g])
h_e = ((V₁'-V₂')^2)/(2*[g])

What is the effect if the cross section of the pipe suddenly enlarges?

Due to sudden enlargement turbulent eddies are formed at the corner of the enlargement of the pipe section. The formation of eddies causes loss of energy in form of heat to the surrounding.

How eddies are formed?

The eddies are formed only when the flow around the obstacle reaches a critical velocity. An eddy is the swirling of a fluid and the reverse current created.

How to Calculate Loss of head due to sudden enlargement at any particular section of pipe?

Loss of head due to sudden enlargement at any particular section of pipe calculator uses Loss of Head Sudden Enlargement = ((Velocity of Fluid at Section 1-Velocity of Fluid at Section 2)^2)/(2*[g]) to calculate the Loss of Head Sudden Enlargement, Loss of head due to sudden enlargement at any particular section of pipe is known while considering the velocity of flow at section 1-1 and section 2-2 for a liquid flowing through the pipe. Loss of Head Sudden Enlargement is denoted by h_e symbol.

How to calculate Loss of head due to sudden enlargement at any particular section of pipe using this online calculator? To use this online calculator for Loss of head due to sudden enlargement at any particular section of pipe, enter Velocity of Fluid at Section 1 (V₁') & Velocity of Fluid at Section 2 (V₂') and hit the calculate button. Here is how the Loss of head due to sudden enlargement at any particular section of pipe calculation can be explained with given input values -> 0.084845 = ((4.18-2.89)^2)/(2*[g]).

FAQ

What is Loss of head due to sudden enlargement at any particular section of pipe?

Loss of head due to sudden enlargement at any particular section of pipe is known while considering the velocity of flow at section 1-1 and section 2-2 for a liquid flowing through the pipe and is represented as h_e = ((V₁'-V₂')^2)/(2*[g]) or Loss of Head Sudden Enlargement = ((Velocity of Fluid at Section 1-Velocity of Fluid at Section 2)^2)/(2*[g]). Velocity of fluid at section 1 is the flow velocity of the liquid flowing in a pipe at a particular section considered as section 1 & Velocity of fluid at section 2 is the flow velocity of the liquid flowing in a pipe at a particular section considered as section 2.

How to calculate Loss of head due to sudden enlargement at any particular section of pipe?

Loss of head due to sudden enlargement at any particular section of pipe is known while considering the velocity of flow at section 1-1 and section 2-2 for a liquid flowing through the pipe is calculated using Loss of Head Sudden Enlargement = ((Velocity of Fluid at Section 1-Velocity of Fluid at Section 2)^2)/(2*[g]). To calculate Loss of head due to sudden enlargement at any particular section of pipe, you need Velocity of Fluid at Section 1 (V₁') & Velocity of Fluid at Section 2 (V₂'). With our tool, you need to enter the respective value for Velocity of Fluid at Section 1 & Velocity of Fluid at Section 2 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search