Long Diagonal of Rhombus Solution

STEP 0: Pre-Calculation Summary
Formula Used
Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2)
dLong = 2*S*cos(Acute/2)
This formula uses 1 Functions, 3 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
Variables Used
Long Diagonal of Rhombus - (Measured in Meter) - The Long Diagonal of Rhombus is the length of line joining the acute angle corners of a Rhombus.
Side of Rhombus - (Measured in Meter) - The Side of Rhombus is the length of any of the four edges.
Acute Angle of Rhombus - (Measured in Radian) - Acute Angle of Rhombus is the angle inside the Rhombus which is less than 90 degree.
STEP 1: Convert Input(s) to Base Unit
Side of Rhombus: 10 Meter --> 10 Meter No Conversion Required
Acute Angle of Rhombus: 45 Degree --> 0.785398163397301 Radian (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
dLong = 2*S*cos(∠Acute/2) --> 2*10*cos(0.785398163397301/2)
Evaluating ... ...
dLong = 18.4775906502263
STEP 3: Convert Result to Output's Unit
18.4775906502263 Meter --> No Conversion Required
FINAL ANSWER
18.4775906502263 18.47759 Meter <-- Long Diagonal of Rhombus
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Nishan Poojary
Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi
Nishan Poojary has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Mona Gladys
St Joseph's College (SJC), Bengaluru
Mona Gladys has verified this Calculator and 1800+ more calculators!

Long Diagonal of Rhombus Calculators

Long Diagonal of Rhombus given Short Diagonal and Acute Angle
​ LaTeX ​ Go Long Diagonal of Rhombus = Short Diagonal of Rhombus/tan(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus given Short Diagonal and Side
​ LaTeX ​ Go Long Diagonal of Rhombus = sqrt(4*Side of Rhombus^2-Short Diagonal of Rhombus^2)
Long Diagonal of Rhombus given Obtuse angle
​ LaTeX ​ Go Long Diagonal of Rhombus = 2*Side of Rhombus*sin(Obtuse Angle of Rhombus/2)
Long Diagonal of Rhombus
​ LaTeX ​ Go Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2)

Diagonal of Rhombus Calculators

Long Diagonal of Rhombus given Short Diagonal and Acute Angle
​ LaTeX ​ Go Long Diagonal of Rhombus = Short Diagonal of Rhombus/tan(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus given Short Diagonal and Side
​ LaTeX ​ Go Long Diagonal of Rhombus = sqrt(4*Side of Rhombus^2-Short Diagonal of Rhombus^2)
Long Diagonal of Rhombus
​ LaTeX ​ Go Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2)
Long Diagonal of Rhombus given Area and Short Diagonal
​ LaTeX ​ Go Long Diagonal of Rhombus = (2*Area of Rhombus)/(Short Diagonal of Rhombus)

Long Diagonal of Rhombus Formula

​LaTeX ​Go
Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2)
dLong = 2*S*cos(Acute/2)

What is a Rhombus?

A Rhombus is a special case of a parallelogram. In a Rhombus, opposite sides are parallel and the opposite angles are equal. Moreover, all the sides of a Rhombus are equal in length, and the diagonals bisect each other at right angles. The rhombus is also called a diamond or Rhombus diamond. The plural form of a Rhombus is Rhombi or Rhombuses.

How to Calculate Long Diagonal of Rhombus?

Long Diagonal of Rhombus calculator uses Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2) to calculate the Long Diagonal of Rhombus, The Long Diagonal of Rhombus is defined as the length of the line joining the acute angle corners of the Rhombus. Long Diagonal of Rhombus is denoted by dLong symbol.

How to calculate Long Diagonal of Rhombus using this online calculator? To use this online calculator for Long Diagonal of Rhombus, enter Side of Rhombus (S) & Acute Angle of Rhombus (∠Acute) and hit the calculate button. Here is how the Long Diagonal of Rhombus calculation can be explained with given input values -> 18.47759 = 2*10*cos(0.785398163397301/2).

FAQ

What is Long Diagonal of Rhombus?
The Long Diagonal of Rhombus is defined as the length of the line joining the acute angle corners of the Rhombus and is represented as dLong = 2*S*cos(∠Acute/2) or Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2). The Side of Rhombus is the length of any of the four edges & Acute Angle of Rhombus is the angle inside the Rhombus which is less than 90 degree.
How to calculate Long Diagonal of Rhombus?
The Long Diagonal of Rhombus is defined as the length of the line joining the acute angle corners of the Rhombus is calculated using Long Diagonal of Rhombus = 2*Side of Rhombus*cos(Acute Angle of Rhombus/2). To calculate Long Diagonal of Rhombus, you need Side of Rhombus (S) & Acute Angle of Rhombus (∠Acute). With our tool, you need to enter the respective value for Side of Rhombus & Acute Angle of Rhombus and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Long Diagonal of Rhombus?
In this formula, Long Diagonal of Rhombus uses Side of Rhombus & Acute Angle of Rhombus. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Long Diagonal of Rhombus = 2*Side of Rhombus*sin(Obtuse Angle of Rhombus/2)
  • Long Diagonal of Rhombus = Short Diagonal of Rhombus/tan(Acute Angle of Rhombus/2)
  • Long Diagonal of Rhombus = sqrt(4*Side of Rhombus^2-Short Diagonal of Rhombus^2)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!