Load Resistance with respect to Transconductance Calculator

✖Output voltage gain is the difference between the output signal voltage level in decibels and the input signal voltage level in decibels.ⓘ Output Voltage Gain [A_v]			+10% -10%
✖Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device.ⓘ Transconductance [g_m]			+10% -10%
✖Series Resistor is a current limiting resistor connected in series with the input voltage. It is used to limit maximum current flowing in a circuit.ⓘ Series Resistor [R_se]			+10% -10%

✖Load resistance is the resistance value of load given for the network.ⓘ Load Resistance with respect to Transconductance [R_L]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Amplifier Characteristics Formulas PDF PDF Image

Load Resistance with respect to Transconductance Solution

STEP 0: Pre-Calculation Summary

Formula Used

Load Resistance = -(Output Voltage Gain*(1/Transconductance+Series Resistor))
R_L = -(A_v*(1/g_m+R_se))
This formula uses 4 Variables

Variables Used

Load Resistance - (Measured in Ohm) - Load resistance is the resistance value of load given for the network.
Output Voltage Gain - Output voltage gain is the difference between the output signal voltage level in decibels and the input signal voltage level in decibels.
Transconductance - (Measured in Siemens) - Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device.
Series Resistor - (Measured in Ohm) - Series Resistor is a current limiting resistor connected in series with the input voltage. It is used to limit maximum current flowing in a circuit.

STEP 1: Convert Input(s) to Base Unit

Output Voltage Gain: -0.352 --> No Conversion Required
Transconductance: 2.04 Siemens --> 2.04 Siemens No Conversion Required
Series Resistor: 12.25 Kilohm --> 12250 Ohm (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_L = -(A_v*(1/g_m+R_se)) --> -((-0.352)*(1/2.04+12250))

Evaluating ... ...

R_L = 4312.17254901961

STEP 3: Convert Result to Output's Unit

4312.17254901961 Ohm -->4.31217254901961 Kilohm (Check conversion here)

FINAL ANSWER

4.31217254901961 ≈ 4.312173 Kilohm <-- Load Resistance

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Amplifiers » Amplifier Characteristics » Load Resistance with respect to Transconductance

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Amplifier Characteristics Calculators

Base Junction Width of Amplifier

LaTeX Go Base Junction Width = (Base Emitter Area*[Charge-e]*Electron Diffusivity*Thermal Equilibrium Concentration)/Saturation Current

Differential Voltage in Amplifier

LaTeX Go Differential Input Signal = Output Voltage/((Resistance 4/Resistance 3)*(1+(Resistance 2)/Resistance 1))

Current Gain of Amplifier

LaTeX Go Current Gain = Output Current/Input Current

Power Gain of Amplifier

LaTeX Go Power Gain = Load Power/Input Power

Load Resistance with respect to Transconductance Formula

LaTeX Go

Load Resistance = -(Output Voltage Gain*(1/Transconductance+Series Resistor))
R_L = -(A_v*(1/g_m+R_se))

What is overall gain?

In other words, a circuit's overall gain (+dB), or attenuation (-dB) is the sum of the individual gains and attenuations for all stages connected between the input and output.

How to Calculate Load Resistance with respect to Transconductance?

Load Resistance with respect to Transconductance calculator uses Load Resistance = -(Output Voltage Gain*(1/Transconductance+Series Resistor)) to calculate the Load Resistance, The Load Resistance with respect to Transconductance is defined as the measure of the resistance of a transistor when it is in the active region and conducting current. Load Resistance is denoted by R_L symbol.

How to calculate Load Resistance with respect to Transconductance using this online calculator? To use this online calculator for Load Resistance with respect to Transconductance, enter Output Voltage Gain (A_v), Transconductance (g_m) & Series Resistor (R_se) and hit the calculate button. Here is how the Load Resistance with respect to Transconductance calculation can be explained with given input values -> 0.004485 = -((-0.352)*(1/0.00204+12250)).

FAQ

What is Load Resistance with respect to Transconductance?

The Load Resistance with respect to Transconductance is defined as the measure of the resistance of a transistor when it is in the active region and conducting current and is represented as R_L = -(A_v*(1/g_m+R_se)) or Load Resistance = -(Output Voltage Gain*(1/Transconductance+Series Resistor)). Output voltage gain is the difference between the output signal voltage level in decibels and the input signal voltage level in decibels, Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device & Series Resistor is a current limiting resistor connected in series with the input voltage. It is used to limit maximum current flowing in a circuit.

How to calculate Load Resistance with respect to Transconductance?

The Load Resistance with respect to Transconductance is defined as the measure of the resistance of a transistor when it is in the active region and conducting current is calculated using Load Resistance = -(Output Voltage Gain*(1/Transconductance+Series Resistor)). To calculate Load Resistance with respect to Transconductance, you need Output Voltage Gain (A_v), Transconductance (g_m) & Series Resistor (R_se). With our tool, you need to enter the respective value for Output Voltage Gain, Transconductance & Series Resistor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search